4 Watt LED Exit Sign | 120 Minute Battery Backup | New York City Approved
Dwayne Kula | President, CTO and Founder
Out of stock
Product Specifications
Key Features
| Brand | LED Lighting Supply |
| Watts | 4 |
| Voltage | 100V-277V |
| Dimming | No |
| Lifespan | 50,000 hours |
| Mounting | Surface or Wall |
| Fixture Color | White |
| Frequency (Hz) | 50/60 |
| Power Factor | > .90 |
| THD | < 20% |
Durable Construction
| Housing | Aluminum |
| IP Rating | Wet Location Rated |
| Certifications | UL |
| Warranty | 2 years |
Measurements
| Dimensions (in) | 14 X 10.5 X 2 |
| Weight (lbs) | 3.5 lbs |
LED Emergency Exit Sign with 120 Min Emergency Backup. New York City Approved. Damp Location Rated, fire-resistant.
Product Overview
This 4-watt LED exit sign provides illuminated emergency exit marking with a 120-minute battery backup. It is New York City approved and intended for egress lighting, emergency exit lighting, code compliance lighting, and life safety lighting.
The aluminum housing is white, fire-resistant, and wet location rated. Surface and wall mounting support installation at designated exit locations.
Core Performance and Output
The sign operates at 4 watts on 100-277V, 50/60 Hz power. Power factor is greater than 0.90, and total harmonic distortion is less than 20%.
The integrated emergency backup operates for 120 minutes. This product is an exit sign, not a general illumination fixture, so its placement should remain focused on visible exit marking and egress routes.
Adjustability and Control Options
This exit sign does not support dimming. It operates across a 100-277V input range.
Surface or wall mounting provides the available installation configurations. The fixture color is white.
Longevity and Reliability
The LED system is rated for a 50,000-hour lifespan. The emergency battery backup provides 120 minutes of operation during an emergency condition.
Long-term service planning should account for maintaining the emergency function and keeping the exit marking visible. The product includes a 2-year warranty.
Build Quality and Physical Characteristics
The housing is aluminum with a fire-resistant construction. The fixture is wet location rated.
Overall dimensions are 14 x 10.5 x 2 inches. Fixture weight is 3.5 pounds.
Where This Product Fits Best
This exit sign fits facilities requiring illuminated exit marking, emergency egress identification, and life safety lighting. Its New York City approval and 120-minute emergency backup are relevant where those project requirements apply.
- emergency exit lighting
- egress lighting
- code compliance lighting
- life safety lighting
- commercial building exit marking
- industrial facility exit lighting
- warehouse exit lighting
- public building exit lighting
The wet location rating supports installations exposed to wet-location conditions. Final placement must maintain clear visibility of the exit marking along the required route.
Installation and Long-Term Use
Install this unit using the specified surface or wall mounting configuration. Verify that the available supply voltage falls within the 100-277V operating range.
Its 14 x 10.5 x 2 inch housing and 3.5-pound weight should be considered when preparing the mounting surface. Maintain access for inspection and emergency backup service.
How This Fixture Is Commonly Used
This fixture is mounted at designated exit locations for egress lighting and emergency exit lighting. Surface and wall mounting allow the sign to follow the mounting conditions at the exit location.
Placement follows the required egress layout and the need for unobstructed sign visibility. Mounting height and sign layout depend on the facility plan and applicable requirements.
Safety, Certifications, and Warranty
This exit sign is UL listed. It is New York City approved.
The fixture is wet location rated and fire-resistant. Warranty coverage is 2 years.
Frequently Asked Questions
Q: What input voltage does this LED exit sign use?
A: This exit sign operates on 100-277V input power at 50/60 Hz.
Q: How long does the emergency battery backup operate?
A: The emergency backup provides 120 minutes of operation.
Q: Can this exit sign be dimmed?
A: No. This exit sign does not support dimming.
Q: What mounting options are available?
A: The fixture supports surface mounting or wall mounting.
Q: What should be considered when planning exit sign placement?
A: Placement should maintain visible exit marking along the required egress layout. Mounting height and sign layout depend on the facility plan and applicable requirements.
Application Questions and Clarification
Q: Is this product suitable for emergency exit lighting?
A: Yes. Emergency exit lighting is a listed application for this product category.
Q: Can this sign be used for warehouse exit lighting?
A: Warehouse exit lighting is a listed secondary application. The installation must use the available surface or wall mounting configuration.
Q: Is this exit sign approved for New York City projects?
A: Yes. This exit sign is New York City approved.
Web ID: 2321
