100 Watt Hybrid Solar Area Light | 20000 Lumens | 4000K | 120-277V | High Performance | 5 Year Warranty

Product Overview

This 100 watt hybrid solar area light delivers 20,000 lumens at 4000K color temperature using a monocrystalline solar panel combined with 100-277V AC input capability. The hybrid configuration allows the fixture to operate from solar-charged battery power or switch to line voltage when solar charging is insufficient.

At 200 lumens per watt, this fixture replaces 400 watt metal halide area lights. The aluminum alloy housing integrates a monocrystalline solar panel, and the unit measures 60 x 16.6 x 10 inches with a weight of 53 lbs. A motion sensor is included.

The fixture mounts via slip fitter and carries an EPA rating of 1.8 for wind load calculations. Rated lifespan is 100,000 hours at L70.

Where This Product Fits Best

This hybrid solar area light is built for parking lots, perimeter lighting, and outdoor pathways where both solar capability and grid backup are needed. The Type 3 beam angle provides forward-throw distribution suited for roadways, walkways, and rectangular coverage areas rather than square or circular patterns.

The IP65 rating allows installation in outdoor locations exposed to rain, dust, and washdown conditions. Facilities looking to reduce grid dependence while maintaining reliable illumination during extended overcast periods or high overnight demand benefit from the hybrid design.

The 1.8 EPA rating requires pole and foundation sizing to account for the fixture''s wind load profile. At 53 lbs, structural support must accommodate both weight and projected area.

Performance and Functional Considerations

The 20,000 lumen output at 100 watts positions this fixture as a direct replacement for 400 watt metal halide area lights. Color rendering is 70+ CRI at 4000K, producing neutral white light appropriate for security, parking, and general outdoor circulation areas.

Polycarbonate optics shape the Type 3 distribution pattern. This fixture does not support dimming. The monocrystalline solar panel charges an integrated battery system during daylight hours, with the 100-277V AC input providing backup when solar charging cannot sustain demand.

Rated lifespan of 100,000 hours at L70 means the fixture will maintain at least 70 percent of initial light output through that duration under normal operating conditions.

Installation and Long-Term Use

The slip fitter mount accepts standard round poles and allows field adjustment of fixture angle. Overall dimensions of 60 x 16.6 x 10 inches and 53 lb weight require two-person installation in most cases. The integrated solar panel must be oriented for adequate sun exposure based on site latitude and seasonal sun angles.

Line voltage input accepts 100-277V AC, covering standard commercial voltages. The hybrid configuration requires both solar panel orientation and electrical connection during installation. Battery replacement is covered under a separate 3-year warranty from the 5-year fixture warranty.

IP65 construction allows the fixture to remain in service through rain, snow, and dust exposure without requiring protective enclosures or seasonal removal.

How This Fixture Is Commonly Used

Facilities use this hybrid solar area light where reduced grid consumption is a priority but consistent overnight illumination cannot be compromised. The AC backup eliminates the risk of dark periods during extended cloudy weather or winter months with limited solar gain.

The Type 3 optics make this fixture well-suited for pole-mounted applications along drive aisles, walkways, and property perimeters where light needs to project forward rather than directly below the pole. The included motion sensor allows the fixture to respond to activity in the coverage area.

Maintenance teams value the long rated lifespan and sealed IP65 construction, which reduce service calls and allow the fixture to operate in exposed locations without ongoing attention.

Safety, Certifications, and Warranty

This fixture is IP65 rated. It can withstand water jets from any direction and is protected against dust ingress.

LED Lighting Supply provides a 5-year warranty on the fixture and a 3-year warranty on the battery.

Frequently Asked Questions

What voltage does this fixture accept?
The fixture operates on 100-277V AC input.

What does this fixture replace?
This 100 watt LED hybrid solar area light replaces 400 watt metal halide fixtures.

What is the beam pattern?
The fixture uses Type 3 optics, providing forward-throw distribution.

What is the IP rating?
IP65. The fixture is protected against dust and water jets.

What is the warranty coverage?
The fixture carries a 5-year warranty. The battery is covered separately under a 3-year warranty.

Does this fixture dim?
No. This fixture does not support dimming.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.