2 Watt LED Exit Sign | 90 Minute Battery Backup | Wet Location Rated
Dwayne Kula | President, CTO and Founder
864 in stock
Product Specifications
Key Features
| Brand | LED Lighting Supply |
| Input Watts | 2 |
| Output Watts | 2.5 Max |
| Voltage | 100V-277V |
| Lifespan | 50,000 hours |
| Mounting | Surface | Wall |
| Fixture Color | White |
| Frequency (Hz) | 50/60 |
| Housing | Injection-Molded Thermoplastic ABS |
| IP Rating | IP65 |
| Certifications | UL |
| Operating Temp | 32°F to +104°F |
| Dimensions (in) | 12.5 L X 2.5 W X 8 H |
| Emergency Backup Time | 90 Minutes |
| Lettering | Red or Green | With or Without Arrows |
Fire-resistant with customizable parts included for either red or green lettering, with or without arrows.
Product Overview
This 2 watt LED exit sign provides illuminated exit identification for egress lighting, emergency exit lighting, code compliance lighting, and life safety lighting. It operates on 100-277V and includes a 90-minute emergency battery backup.
The sign has a white injection-molded thermoplastic ABS housing with red or green lettering options. Included configurable parts support lettering with or without directional arrows.
Core Performance and Output
This exit sign draws 2 watts during normal operation, with 2.5 watts maximum output. It operates on 100-277V, 50/60 Hz electrical systems.
Illumination is provided through the exit lettering rather than a directional lighting distribution. Beam distribution data is not specified for this product.
Adjustability and Control Options
Lettering is available in red or green. The sign can be configured with or without directional arrows using the included parts.
No dimming, occupancy sensing, photocell, or network control capability is specified. Configuration should be completed before final mounting.
Longevity and Reliability
The LED system is rated for 50,000 hours of service life. The integrated emergency backup operates for 90 minutes during a power interruption.
The operating temperature range is 32 F to 104 F. The housing is fire-resistant thermoplastic ABS.
Build Quality and Physical Characteristics
This exit sign uses a white injection-molded thermoplastic ABS housing. Overall dimensions are 12.5 inches long, 2.5 inches wide, and 8 inches high.
The fixture is IP65 rated. Surface and wall mounting are supported.
Where This Product Fits Best
This exit sign fits interior and wet-location egress routes where illuminated exit identification and emergency backup are required. Its surface or wall mounting supports common exit marking locations.
- egress lighting
- emergency exit lighting
- life safety lighting
- code compliance lighting
- commercial building exit marking
- industrial facility exit lighting
The IP65 rating supports wet-location installation conditions. The specified operating range remains 32 F to 104 F.
Installation and Long-Term Use
Install the sign using the specified surface or wall mounting method. Confirm the required lettering color and directional arrow configuration before completing the installation.
Connect the fixture to a 100-277V, 50/60 Hz supply. Long-term maintenance should include verification of exit visibility and 90-minute emergency backup operation.
How This Fixture Is Commonly Used
For egress lighting and emergency exit lighting, the sign is mounted where the exit designation must remain visible along the intended route. Wall mounting is used where the sign is installed against a vertical surface, while surface mounting supports other finished mounting surfaces.
Arrow direction is selected to match the route layout. Placement depends on the building exit path and required visibility, so a specific spacing value is not established by the supplied product data.
Safety, Certifications, and Warranty
This exit sign is UL listed. It is IP65 rated.
The fixture includes a 90-minute emergency backup. Warranty information is not specified in the supplied product data.
Frequently Asked Questions
Q: What input voltage does this LED exit sign use?
A: This exit sign operates on 100-277V at 50/60 Hz.
Q: How long does the emergency battery backup operate?
A: The emergency backup time is 90 minutes.
Q: Can the sign be configured with directional arrows?
A: Yes. Included configurable parts support lettering with or without directional arrows.
Q: What mounting methods are supported?
A: The fixture supports surface mounting and wall mounting.
Q: What determines exit sign placement for egress lighting?
A: Placement depends on the building exit path, required visibility, lettering color, and arrow direction. A specific spacing value is not established by the supplied product data.
Application Questions and Clarification
Q: Is this fixture suitable for wet-location exit marking?
A: The fixture is IP65 rated and supports commercial building exit marking and industrial facility exit lighting.
Q: What lettering colors are available for life safety lighting?
A: This exit sign is available with red or green lettering.
Q: What should be confirmed before mounting for emergency exit lighting?
A: Confirm the mounting method, lettering color, directional arrow requirement, and available 100-277V supply.
Web ID: 2209