200 Watt LED Shoebox Area Light | 26000 Lumens | 5000K | 100-277V

Product Overview

This 200 watt LED shoebox area light produces 26,000 lumens at 5000K with a Type 3 distribution pattern. The fixture operates at 130 lumens per watt and replaces 400 watt metal halide systems in parking lots, roadways, and general area lighting applications.

The die-cast aluminum housing is finished in bronze and measures 27 inches long by 13.11 inches wide by 6.61 inches tall. Total fixture weight is 17 pounds. A polycarbonate lens covers the LED array, and the fixture accepts either arm or slip fitter mounting.

Input voltage range is 100V-277V at 50-60Hz. The fixture includes 1-10V dimming capability. CRI is rated at 70 or higher.

Where This Product Fits Best

This fixture is sized for area lighting applications that currently use 400 watt metal halide or need 26,000 lumens of output. Parking lots, driveways, loading areas, and pathway lighting are common installations. The Type 3 optic throws light forward and to the sides, which suits roadway-adjacent and perimeter pole positions.

The operating temperature range of -40°F to 113°F supports year-round outdoor use in most climates. IP65 rating allows installation where the fixture will be exposed to rain, snow, and hose-directed water during cleaning. The 2.1 EPA rating should be factored into pole and foundation wind load calculations.

Performance and Functional Considerations

At 200 watts drawing from 100-277V input, this fixture fits standard commercial electrical systems without requiring special voltage considerations. Power factor is 0.9 and total harmonic distortion is 15%, which keeps the electrical load characteristics within typical utility and facility standards.

The 50,000 hour L70 lifespan represents the point at which lumen output is projected to reach 70% of initial rated output. For facilities running lights from dusk to dawn, this translates to years of service before output degradation becomes noticeable. The 1-10V dimming input allows integration with building management systems or standalone dimming controls where reduced output is needed during low-activity hours.

Installation and Long-Term Use

The fixture mounts via arm or slip fitter, which covers most pole-top and wall-arm configurations. At 17 pounds, the fixture requires standard mounting hardware but does not present unusual weight challenges for typical area light poles. The 2.1 EPA should be confirmed against pole specifications, especially in high-wind regions or on taller poles.

Die-cast aluminum construction and IP65 ingress protection support long-term outdoor exposure without housing degradation. The bronze finish blends with common commercial and municipal pole colors. Access for any future maintenance or driver replacement should be confirmed during installation planning based on mounting height and fixture orientation.

How This Fixture Is Commonly Used

Once installed, this fixture delivers consistent area lighting without routine adjustment. The Type 3 distribution is fixed, so pole placement determines the final light pattern on the ground. If the site uses 1-10V dimming controls, output can be reduced during overnight hours or low-occupancy periods to lower energy consumption.

The 5000K color temperature provides a daylight-range appearance that supports visibility and color recognition in parking and pedestrian areas. Facilities typically set these fixtures and leave them running on photocell or time-clock schedules with minimal ongoing interaction.

Safety, Certifications, and Warranty

This fixture is UL listed. It is rebate eligible through applicable utility programs.

We provide a 5-year warranty on this fixture.

Frequently Asked Questions

What voltage does this fixture require?
The fixture operates on 100V-277V input at 50-60Hz, covering standard commercial voltage ranges without requiring a specific tap or transformer selection.

What does this fixture replace?
This LED shoebox replaces 400 watt metal halide area lights while reducing input wattage to 200 watts.

Is this fixture eligible for utility rebates?
Yes, this fixture is rebate eligible. Confirm specific program requirements with your local utility before purchasing.

What mounting options are available?
The fixture accepts arm mount or slip fitter mounting configurations.

What is the warranty coverage?
This fixture includes a 5-year warranty.

Can this fixture be dimmed?
Yes, the fixture includes 1-10V dimming capability for use with compatible controls.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.