40 Watt Solar Area Light | 8000 Lumens | 4000K | High Performance | 5 Year Warranty

Product Overview

This 40 watt solar area light delivers 8000 lumens at 4000K with a Type 3 beam distribution designed for roadway, pathway, and parking area coverage patterns. The fixture operates as a direct replacement for 250 watt metal halide systems, drawing power from an integrated monocrystalline solar panel housed within the aluminum alloy body.

At 200 lumens per watt, this fixture achieves high-efficiency output from its 40 watt draw. The polycarbonate optics shape light into a Type 3 distribution suited for area lighting where forward throw and moderate lateral spread are needed. Color rendering is rated at 70+ CRI with a rated lifespan of 100,000 hours at L70.

The complete assembly measures 48.2 x 16.6 x 10 inches and weighs 36 pounds. A slip fitter mount is included for attachment to round poles. The fixture includes a motion sensor.

Where This Product Fits Best

This solar area light is built for outdoor locations where running electrical service to the pole is impractical, cost-prohibitive, or not permitted. Remote parking areas, pathways, perimeter roads, and gated entries are common placements where solar eliminates trenching and electrical infrastructure.

The IP65 rating allows installation in locations exposed to rain, wind-driven dust, and seasonal weather without ingress into the housing or electrical components. With an EPA of 1.8, the fixture presents a defined wind load profile that must be factored into pole selection and foundation sizing for the installation site.

Type 3 optics make this fixture appropriate for mounting along the edge of an area where light needs to project outward and across, rather than directly below. This distribution pattern is typical for street-side, lot perimeter, and walkway applications.

Performance and Functional Considerations

The 8000 lumen output at 40 watts positions this fixture as a replacement for 250 watt metal halide area lights. Facilities replacing legacy HID fixtures should verify that the Type 3 distribution pattern aligns with the existing coverage requirements of the space being served.

The 4000K color temperature produces a neutral white light commonly used in outdoor commercial and municipal applications. CRI of 70+ is appropriate for general area lighting where color accuracy is not a primary requirement.

This fixture does not support dimming. Output is fixed at full brightness when active. The included motion sensor provides occupancy-based activation, but specific operational settings are configured during commissioning.

Installation and Long-Term Use

The slip fitter mount allows the fixture to attach directly to round poles, with adjustment for aiming angle at the time of installation. At 36 pounds, the fixture requires appropriate lift equipment and may need two personnel for safe handling during mounting.

The aluminum alloy housing and monocrystalline solar panel are designed for long-term outdoor exposure. IP65 construction keeps dust and water jets from penetrating the enclosure. Periodic cleaning of the solar panel surface is necessary to maintain charging performance, especially in dusty or pollen-heavy environments.

With a 100,000-hour L70 lifespan, the LED array is expected to retain at least 70 percent of initial output through its rated service life under normal operating conditions.

How This Fixture Is Commonly Used

Once installed, this fixture operates autonomously using stored solar energy. The monocrystalline panel charges during daylight hours, and the fixture activates based on ambient light conditions and the included motion sensor. There is no grid connection or external power supply to manage.

The Type 3 beam throws light forward and to the sides, making this fixture well-suited to edge-mounted applications where coverage extends outward from the pole. Parking lot perimeters, access roads, and pedestrian paths are typical use cases where this pattern provides useful coverage without excessive backlight.

Maintenance is minimal under normal conditions. The main ongoing task is keeping the solar panel clear of debris, snow, or buildup that would reduce charging efficiency.

Safety, Certifications, and Warranty

This fixture is IP65 rated. It can tolerate dust accumulation and direct water jets from any direction without damage to internal components.

The product is covered by a 5-year warranty.

Frequently Asked Questions

What does this fixture replace?
This 40 watt solar area light replaces 250 watt metal halide fixtures.

What is the beam distribution?
The fixture uses Type 3 optics, which provide forward throw with moderate side spread. This pattern is typical for roadway and perimeter lighting.

What is the IP rating?
The fixture is IP65 rated, allowing it to be installed outdoors in locations exposed to rain, dust, and weather.

Does this fixture require grid power?
No. The integrated monocrystalline solar panel provides all power. No electrical connection is required.

What is the warranty coverage?
This fixture includes a 5-year warranty.

What mounting method does this fixture use?
The fixture includes a slip fitter mount for attachment to round poles.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.