40 / 60 / 80 Watt Adjustable LED Canopy Light | 5200 to 10400 Lumens | 3500K / 4000K / 5000K Adjustable | 100-277V | Bronze

Product Overview

This adjustable LED canopy light delivers 5,200 to 10,400 lumens from a single fixture with field-selectable wattage at 40, 60, or 80 watts. The three-position wattage switch allows output adjustment after the fixture is mounted, matching light levels to actual site conditions without fixture replacement. Color temperature is also field-selectable at 3500K, 4000K, or 5000K.

The fixture replaces 150 to 250 watt metal halide canopy lights and operates on 100-277V input. Construction is die-cast aluminum with a bronze powder coat finish. The lens is clear acrylic rated for vandal resistance. Mounting options include surface mount or pendant, with half-inch coin plugs for conduit access.

Dimensions are 10 inches by 10 inches by 2.75 inches deep. Weight is 5 pounds. Rated lifespan is 50,000 hours at L70.

Where This Product Fits Best

This canopy light is built for gas station canopies, parking structure ceilings, building entrance overhangs, and similar covered outdoor or semi-outdoor areas where fixtures mount overhead and face downward. The IP65 rating allows installation in locations exposed to rain, washdown, and airborne dust without housing compromise.

The operating temperature range of -4 degrees F to 113 degrees F supports year-round installation in most climates. The 140-degree beam angle provides broad coverage suited to canopy heights where wide light distribution is needed rather than concentrated throw.

Bronze finish is appropriate for architectural applications where fixture appearance matters or where color matching to existing site hardware is required.

Performance and Functional Considerations

Output scales linearly across wattage settings. At 40 watts the fixture delivers 5,200 lumens, at 60 watts it delivers 7,800 lumens, and at 80 watts it delivers 10,400 lumens. Efficacy holds at 130 lumens per watt across all settings. CRI is 80 or higher at all color temperatures.

The 1-10V dimming input allows integration with external dimming controls or building automation systems where continuous dimming beyond the wattage steps is needed. Power factor exceeds 0.90 and total harmonic distortion is under 20 percent, supporting compatibility with most commercial electrical systems.

The 100-277V universal voltage input accommodates both 120V single-phase and 277V commercial circuits without rewiring or transformer requirements.

Installation and Long-Term Use

Surface mounting is direct to junction boxes or structural surfaces. Pendant mounting is supported for drop installations. The half-inch coin plugs on the housing allow conduit entry without additional drilling or modification. At 5 pounds, the fixture is manageable for single-person installation in most conditions.

The die-cast aluminum housing with bronze finish resists corrosion in outdoor and semi-outdoor environments. The IP65 rating allows direct exposure to driven rain and hose spray during canopy cleaning without water ingress. The acrylic lens resists impact and casual vandalism better than glass alternatives.

Rated lifespan of 50,000 hours at L70 means the fixture will maintain at least 70 percent of initial output through that service period under normal operating conditions.

How This Fixture Is Commonly Used

The wattage and color temperature switches on this fixture are set during or after installation, not locked at the factory. If light levels are too high or too low once the fixture is energized, the wattage can be changed on site without removing the fixture or changing any wiring. The same applies to color temperature if the installed appearance does not match adjacent fixtures or site preferences.

For facilities replacing metal halide canopy lights, the 80-watt setting typically provides comparable or higher output than 250-watt metal halide, while the 40-watt setting aligns closer to 150-watt metal halide replacement. Starting at the middle 60-watt setting and adjusting based on observed conditions is a common approach during commissioning.

The 1-10V dimming connection allows facilities with centralized lighting control to reduce output during low-traffic periods or overnight hours. Without an external dimming signal, the fixture operates at full output based on the selected wattage position.

Safety, Certifications, and Warranty

This fixture is UL listed. It is rebate eligible through applicable utility programs.

IP65 rating means the fixture is protected against dust ingress and water projected from a nozzle in any direction. The operating temperature range is -4 degrees F to 113 degrees F.

LED Lighting Supply provides a 5-year warranty on this fixture.

Frequently Asked Questions

What wattage options are available?
The fixture is field-adjustable to 40, 60, or 80 watts using an internal switch.

What voltage does this fixture require?
It operates on 100-277V input at 50-60Hz.

Is this fixture rated for wet locations?
Yes. The IP65 rating allows installation in areas exposed to rain and direct water spray.

What color temperatures are available?
Color temperature is field-selectable at 3500K, 4000K, or 5000K.

Is this fixture rebate eligible?
Yes. The fixture is listed as rebate eligible.

What is the warranty coverage?
LED Lighting Supply provides a 5-year warranty.

What type of metal halide does this replace?
This fixture replaces 150 to 250 watt metal halide canopy lights depending on wattage setting.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.