100 Watt Square Explosion Proof LED Light | 13000 Lumens | Class 1 Div 2 | Class 2 Div 2 | 5000K | 100-277V

Product Overview

This 100 watt square explosion proof LED fixture delivers 13,000 lumens at 130 lumens per watt, replacing 250 watt metal halide systems in hazardous location environments. The 5000K color temperature provides neutral white light suitable for industrial task visibility. A 120-degree beam angle from the tempered glass lens distributes light across wide coverage areas.

The fixture operates on 100-277V input at 50-60Hz, supporting standard commercial and industrial electrical systems. Copper free aluminum housing contains the fixture in a square form factor measuring 12 x 12 x 6.6 inches and weighing 17 pounds. Rated lifespan reaches 50,000 hours at L70 maintenance.

Both pendant and trunnion mounting options are available, allowing the fixture to function as a high bay, low bay, or flood light depending on installation orientation and location requirements.

Where This Product Fits Best

This fixture carries UL844 certification for Class 1 Division 2 Groups A, B, C, D and Class 2 Division 1 Groups E, F, G as well as Class 2 Division 2 Groups F, G and Class 3 locations. Zone ratings include 1/2 and 21/22. These classifications cover environments where flammable gases, vapors, dusts, or fibers may be present under normal or abnormal conditions.

The IP68 rating allows the fixture to withstand continuous immersion and complete dust ingress protection. IK09 impact resistance protects against physical contact damage in active industrial environments. The fixture is listed for wet locations under UL 1598 and carries an Outside Type salt water rating, making it appropriate for marine, coastal, and fully exposed outdoor installations.

Operating temperature range spans -22 degrees F to 122 degrees F, covering cold storage entries, outdoor winter conditions, and elevated ambient temperature zones in process facilities. T4A temperature rating limits maximum surface temperature for safe operation around combustible materials.

Performance and Functional Considerations

At 13,000 lumens from 100 watts, this fixture provides a direct replacement path for 250 watt metal halide systems while reducing connected load. The 70+ CRI supports general industrial tasks where color accuracy is functional rather than critical. Power factor exceeds 0.98 and total harmonic distortion remains below 10 percent, maintaining clean power draw on facility electrical systems.

The fixture does not support dimming. Light output is fixed at full rated lumens when powered. The 10kV surge protection rating provides tolerance against transient voltage events common in industrial electrical environments.

The tempered glass lens maintains optical clarity and withstands thermal cycling and physical exposure better than polycarbonate in harsh environments. The copper free aluminum housing eliminates galvanic corrosion concerns in chemically active or marine atmospheres.

Installation and Long-Term Use

Pendant mounting positions the fixture below a ceiling or structural member using a threaded stem or conduit drop, typical for high bay and low bay applications. Trunnion mounting allows angle adjustment for flood light or wall-mounted configurations where directional aim is required.

At 17 pounds, the fixture requires appropriate structural support and may need two personnel for overhead positioning during installation. The 12 x 12 inch square footprint should be verified against available mounting locations and clearance requirements in the hazardous area classification zone.

The 50,000-hour rated lifespan at L70 reduces relamping frequency compared to metal halide sources, which is operationally significant in hazardous locations where maintenance access may require permits, lockout procedures, or atmospheric testing. The sealed IP68 housing does not require field-serviceable lamp replacement.

How This Fixture Is Commonly Used

Facilities replace existing 250 watt metal halide high bays in classified areas with this fixture to reduce energy consumption while maintaining or improving light levels. The 120-degree beam angle works in standard warehouse-height applications without requiring supplemental optics.

In outdoor or semi-exposed locations, the trunnion mount allows the fixture to serve as a flood light for equipment yards, loading areas, or tank farms within classified zones. The salt water and wet location ratings support installations in marine terminals, offshore platforms, and coastal processing facilities.

The fixed output and non-dimming operation means the fixture runs at full brightness whenever energized. Facilities requiring output control or occupancy-based switching must implement switching upstream of the fixture through external contactors or control systems rated for the hazardous location.

Safety, Certifications, and Warranty

This fixture is UL844 certified for Class 1 Division 2 Groups A, B, C, D, Class 2 Division 1 Groups E, F, G, Class 2 Division 2 Groups F, G, and Class 3 locations. Zone certifications include 1/2 and 21/22. The fixture is UL 1598 listed for wet locations and UL1598A listed.

IP68 rating provides complete protection against dust ingress and continuous water immersion. IK09 rating allows the fixture to withstand impacts equivalent to those encountered in active industrial environments with equipment movement and material handling.

T4A temperature classification limits maximum external surface temperature, which determines suitability relative to the ignition temperature of materials present in the classified area. We provide a 5-year warranty on this fixture. The fixture is rebate eligible.

Frequently Asked Questions

What voltage does this fixture accept?
The fixture operates on 100-277V at 50-60Hz, covering standard commercial and industrial single-phase and three-phase systems in this voltage range.

What hazardous location classifications does this fixture hold?
UL844 certification covers Class 1 Division 2 Groups A, B, C, D, Class 2 Division 1 Groups E, F, G, Class 2 Division 2 Groups F, G, and Class 3. Zone ratings are 1/2 and 21/22.

Can this fixture be used outdoors?
Yes. The fixture is UL 1598 wet location listed and carries an Outside Type salt water rating for marine and coastal exposure.

What mounting options are available?
Pendant and trunnion mounting are both supported, allowing high bay, low bay, or flood light configurations.

Is this fixture dimmable?
No. The fixture does not support dimming and operates at fixed full output.

Is this fixture rebate eligible?
Yes. The fixture is listed as rebate eligible.

What is the warranty?
We provide a 5-year warranty on this fixture.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.