Unboxing the 50W LED High Temp Fixture Review
Description
In this video, Dave Moore of LED Lighting Supply takes you through an unboxing of the HT80 50 Watt High Temperature fixture and the elements that make this light unique.\n\nTranscript:\n\nHi, I'm Dave with LED Lighting Supply and in this video we'll be unboxing the 50 Watt HT-80 and that HT is for High Temp and 80 is for 80° C so that's 176° F that these fixtures can withstand. We have a full line from 50 Watt up to 450 Watt stocked here in our warehouse in New Hampshire. Very rugged, IP66 rated. We do a lot of these for heavy manufacturing facilities that require that high temp rating.\n\nSo this is the 50 Watt HT-80. So again HT-80 for 80° C or 176° F. On the front, you got the LED board just one single module it's a 110° beam angle and that's what we stock but we can customize if needed. On the back, you have the trunnion bracket that swivels up by loosening these screws. You also have the eye hook if you want to mount that way if you want to remove that, undo that Bolt, remove the eye hook and you can surface mount where needed. And then our information here on the electrical requirements. For this, we do stock the 100 to 277 but we also do have high voltage if you need that as well.\n\nThe wire cord here is about 3 ft long these are non-dimmable. Take a look at the heat sink here on the back, all these fins are made for optimal ventilation of the driver because when you're getting to those really high temperatures you need to have um plenty of air circulating around and heat moving off of the driver. If you think that this fixture could be the right fit for your application, please feel free to reach out to one of our lighting Specialists and we can point you in the right direction.