Logo
Contractor Pricing Contractor Pricing
Lights In Stock 100,000+ lights in stock
Sales Reps Dedicated Sales Reps
LED Lighting Supply / Resources / Videos / Unboxing 30W LED Explosion Proof Vapor Tight Fixture | C1D2 Review

Unboxing 30W LED Explosion Proof Vapor Tight Fixture | C1D2 Review

Description

In this video, Dave Moore of LED Lighting Supply takes you through an unboxing of the C1D2 20 Watt Explosion Proof Vapor Tight light and the important features of this fixture.\n\nTranscript:\n\nI'm David LED light supply in this video we're going to be talking about the explosion-proof series of vapor tights that we sell. So this is a class one division two vapor tights. That's where explosions are not likely, but are possible. So let's get into the video and I'll go over the key benefits and features of going with this unit.\n\nSo this is our Class One division two vapor type fixture. So for class one, division two products, that's where you have flammable gases, liquids or vapors that are present but are not likely to cause an explosion. So a paint booth that's usually pretty well ventilated, you know, oil and gas rigs, chemical processing plants that great ventilation are usually considered C1D2. So for this one,, you know, polycarbonate lens, 4 clips per side that hold together and then you also have two knockouts on either side, so you can do through wiring if you need to, but out-of-the-box the cords are already exposed so you can just wire this right up without a problem never having to actually open up the fixture.\n\nt3his one is a 30-watt, 2-foot. But we also have other sizes as well and higher wattages. So if you think this fixture may be the correct unit for your environment, feel free to reach out to one of our lighting specialists and we can point you in the right direction.

Get Your Custom Lighting Plan With Product Recommendations

We'll reach out within 30 minutes