Step-by-Step Guide: Installing UFO High Bay Light Fixtures Easily

How to Install a UFO High Bay Using an I-Hook

In this video, we walk through the process of installing a UFO high bay light using an I-hook, which is the most common installation method for this type of fixture. Follow these simple steps to ensure a secure and efficient setup.

Installation Steps

1. Preparing the I-Hook

• The fixture comes with an I-hook and washer for easy mounting
• On the top of the fixture, locate the threaded hole where the I-hook will be inserted
• If the set screw is already tightened, loosen it before inserting the I-hook
• Thread the I-hook into place and then retighten the set screw to secure it

2. Adjusting Color Temperature and Wattage

• If the fixture has adjustable settings, make any necessary changes before powering it on
• Pop off the rubber grommet to access the dip switches
• Use the guide provided to select the desired color temperature and wattage
• For example, a standard setting might be 100 watts, but you can adjust it down to 60 watts as needed

3. Wiring the Fixture

• Connect the fixture’s wires to the appropriate power source
• Installation may vary depending on whether you are wiring into a junction box or plugging directly into an outlet
• Secure any loose wires and ensure a clean, safe setup

4. Mounting the Fixture

• Once the wiring is complete, lift the fixture and hook it onto the mounting point
• Tuck any excess wires neatly away to avoid interference
• Power on the fixture to confirm proper operation

Need Assistance With Your Installation?

If you have any questions or need help with a customized installation, reach out to our team. We can provide expert guidance to ensure your setup meets your specific requirements.