Need help choosing the right Product?
Get expert recommendations and a custom lighting plan within 1 day! Get Product Recommendations ➜
30 Foot Above Grade Round Tapered Fiberglass Light Pole | 8.5 Inch Base Diameter | Direct Burial | 3 EPA at 180 MPH
This 25-foot fiberglass pole is a strong choice for mounting area lights or equipment in environments where corrosion resistance and non-conductivity are important, such as coastal sites, chemical facilities, or electrically sensitive areas. Its acrylic enamel finish and color options support long-term appearance and site integration, while the anchor base design allows secure installation on concrete foundations. The pole’s EPA ratings up to 160 mph make it suitable for locations with high wind exposure, provided fixture area limits are observed. Routine inspection of mounting hardware is recommended.
Dwayne Kula | President, CTO and Founder
Product Description
This pole is available with either a top cap or tenon and can be finished in black, white, bronze, or gray at no additional charge.
Key Features
- Total Height (ft): 36
- Height Above Grade (ft): 30
- Material: Fiberglass
- Pole Weight (lbs): 176
- Pole Diameter (in): 8.5
- Pole Finish: Acrylic Enamel
- Pole Color: Bronze | Black | White | Gray | Custom
- Pole Installation: Direct Burial
- Warranty: 15 years
- EPA at 180 mph: 3
Disclaimer: LED Lighting Supply is not responsible for improper loading of light fixtures or other attachments, improper use, or foundation design of light poles. We act solely as a supplier of lighting solutions, including metal halide replacement fixtures and parking lot light poles. Final pole assembly and installation are the responsibility of the purchaser.
Dimensions and specifications for round or square composite light poles are subject to change without notice. Please refer to the current data sheet for the most up-to-date specifications. Custom sizing is available only for large-quantity orders. Pole caps may be used in place of other mounting options when required.
Composite light poles are covered by a 15-year workmanship warranty, which warrants that the poles are free from manufacturing defects - including weld and structural integrity issues - at the time of shipment. Any pole found to be defective, upon examination, during normal use and service within 15 years from the date of shipment will be repaired or replaced at our discretion. This warranty does not cover damage resulting from external factors, misuse, or normal wear and tear.
Web ID: 2740
Product Overview
This 30 foot above grade round tapered fiberglass light pole is designed for direct burial installation in outdoor environments where corrosion resistance and non-conductivity are required. The pole features an 8.5 inch base diameter and a total length of 36 feet, providing 30 feet of mounting height above grade. Typical use cases include supporting area and sports lighting fixtures in locations exposed to harsh weather, coastal air, or corrosive atmospheres.
The fiberglass construction and acrylic enamel finish offer long-term durability in environments where steel or aluminum poles may be prone to rust or degradation. This pole is suitable for applications requiring up to 3 EPA at 180 mph wind load, making it appropriate for open sites and areas with high wind exposure.
Core Performance and Output
This fiberglass pole supports a maximum effective projected area (EPA) of 3 at 180 mph, allowing for the mounting of multiple standard area or sports lighting fixtures within this limit. The 8.5 inch base diameter and tapered design provide structural stability while minimizing weight at 176 lbs. The direct burial configuration eliminates the need for anchor bolts or base plates, reducing installation complexity in suitable soil conditions.
Material performance is optimized for non-conductivity and resistance to corrosion, making this pole suitable for coastal, marina, and wastewater environments. Excessive fixture loading or exceeding the EPA rating can compromise structural integrity, especially in high wind regions. For installations above 30 feet or with higher fixture loads, consult structural guidelines for pole selection and spacing.
Adjustability and Control Options
This pole is available with either a top cap or a tenon, supporting a range of fixture mounting options including direct arm, slipfitter, or post-top configurations. The finish is offered in black, white, bronze, or gray at no additional charge, with custom colors available for site-specific requirements.
Fixture orientation and aiming depend on the selected mounting accessory and fixture type. The pole itself does not include integrated wiring or control components; conduit and wiring must be specified and installed according to local code and fixture requirements.
Longevity and Reliability
The fiberglass construction provides long-term resistance to corrosion, UV exposure, and chemical attack, supporting a 15-year warranty. The acrylic enamel finish further protects against surface degradation and color fading in outdoor environments.
Non-conductive properties reduce risk in areas with electrical exposure or lightning activity. Direct burial installation eliminates base plate corrosion concerns but requires proper site preparation and backfill for long-term stability. Routine inspection of burial depth and soil conditions is recommended in high water table or shifting soil environments.
Build Quality and Physical Characteristics
This pole is manufactured from high-strength fiberglass with a round tapered profile and an 8.5 inch base diameter. The total pole length is 36 feet, providing 30 feet above grade when installed to specification. The pole weight is 176 lbs, allowing for manageable handling with standard equipment.
The acrylic enamel finish is available in multiple standard colors, with custom options for project-specific requirements. The pole is supplied with either a top cap or tenon as specified. Direct burial design requires no anchor bolts or base plate, reducing exposed hardware and potential corrosion points.
Where This Product Fits Best
This fiberglass light pole is suited for outdoor environments where corrosion resistance, non-conductivity, and high wind performance are required. Typical installations include sports fields, coastal sites, and areas with chemical exposure or high humidity.
- baseball field lighting
- football field lighting
- sports field lighting
- coastal lighting
- corrosive environment lighting
- marina lighting
- wastewater facility lighting
- roadway lighting
The pole is designed for direct burial in soil and is suitable for both new construction and replacement projects where steel or aluminum poles are not preferred. Environmental characteristics include resistance to salt, moisture, and chemicals, as well as non-conductivity for added safety in exposed locations.
Installation and Long-Term Use
Direct burial installation requires excavation to the specified depth, proper backfill, and compaction to ensure long-term stability. The pole weight allows for handling with standard lifting equipment. No base plate or anchor bolts are required, reducing installation time and eliminating exposed hardware at grade.
Routine inspection of burial depth, soil compaction, and pole alignment is recommended, especially in areas with freeze-thaw cycles or high water tables. The non-conductive fiberglass material reduces electrical hazard risk during installation and operation. Surface cleaning and finish inspection should be performed periodically to maintain appearance and performance.
How This Fixture Is Commonly Used
This pole is typically installed at 30 feet above grade to support area, sports, or roadway lighting fixtures. Fixture mounting is determined by the selected top cap or tenon configuration, with common layouts including single or multiple fixtures per pole within the 3 EPA limit.
Spacing between poles is based on fixture output, beam distribution, and site lighting requirements. Higher mounting heights can reduce the number of poles needed but may require higher output fixtures and careful attention to wind loading. For sports field and coastal applications, pole placement is coordinated with field layout and environmental exposure.
Tradeoff: Increasing fixture count or EPA per pole may require closer pole spacing or larger diameter poles to maintain structural safety in high wind areas.
Safety, Certifications, and Warranty
This fiberglass pole is non-conductive and corrosion resistant, supporting safe operation in coastal, chemical, and high humidity environments. The pole is rated for 3 EPA at 180 mph wind load. All finishes are UV resistant and suitable for outdoor use.
The product includes a 15-year warranty covering material and structural performance under normal operating conditions. Installation must follow manufacturer guidelines for direct burial depth and backfill to maintain warranty coverage. No additional certifications are specified for this product.
Frequently Asked Questions
Q: What is the maximum fixture load this pole can support?
A: The pole supports up to 3 EPA at 180 mph. Total fixture and bracket EPA must not exceed this rating.
Q: What is the required burial depth for installation?
A: The pole is 36 feet total length, with 30 feet above grade. The remaining 6 feet must be buried according to manufacturer guidelines.
Q: Can this pole be used in coastal or corrosive environments?
A: Yes, the fiberglass construction and acrylic enamel finish are suitable for coastal, marina, and corrosive environments.
Q: What mounting options are available for fixtures?
A: The pole can be supplied with either a top cap or a tenon to accommodate various fixture mounting methods.
Q: How should pole spacing be determined for sports field lighting?
A: Spacing depends on fixture output, beam pattern, and field layout. EPA and wind load limits must be considered when planning pole locations.
Application Questions and Clarification
Q: Is this pole suitable for supporting lighting at wastewater facilities?
A: Yes, the pole is rated for use in wastewater facility lighting and other corrosive environments.
Q: Can this pole be used for roadway lighting applications?
A: Yes, this pole is suitable for roadway lighting within the EPA and wind load limits specified.
Q: Is this pole appropriate for marina or coastal lighting installations?
A: Yes, the fiberglass material and finish are designed for use in marina and coastal lighting applications.
Q: What is the recommended maintenance for this fiberglass pole?
A: Periodic inspection of the finish, burial depth, and alignment is recommended. Surface cleaning may be performed as needed to maintain appearance.
