Need help choosing the right Product?
Get expert recommendations and a custom lighting plan within 1 day! Get Product Recommendations ➜
25 Foot Round Fiberglass Light Pole | 6 Inch Diameter | Anchor Base | High Wind Zone Rated
This 25-foot fiberglass pole is a strong choice for mounting area lights or equipment in environments where corrosion resistance and non-conductivity are important, such as coastal sites, chemical facilities, or electrically sensitive areas. Its acrylic enamel finish and color options support long-term appearance and site integration, while the anchor base design allows secure installation on concrete foundations. The pole’s EPA ratings up to 160 mph make it suitable for locations with high wind exposure, provided fixture area limits are observed. Routine inspection of mounting hardware is recommended.
Dwayne Kula | President, CTO and Founder
Product Description
Key Features
- Total Height (ft): 25
- Material: Fiberglass
- Pole Weight (lbs): 104
- Pole Diameter (in): 6
- Pole Bolt Circle (in): 8
- Pole Finish: Acrylic Enamel
- Pole Color: Bronze | Black | White | Gray | Custom
- Bolt Projection (in): 2.75
- Pole Installation: Anchor Base
- Warranty: 15 years
- EPA at 70 mph: 12
- EPA at 110 mph: 7.5
- EPA at 130 mph: 5.5
- EPA at 160 mph: 3
Disclaimer: LED Lighting Supply is not responsible for improper loading of light fixtures or other attachments, improper use, or foundation design of light poles. We act solely as a supplier of lighting solutions, including metal halide replacement fixtures and parking lot light poles. Final pole assembly and installation are the responsibility of the purchaser.
Dimensions and specifications for round or square composite light poles are subject to change without notice. Please refer to the current data sheet for the most up-to-date specifications. Custom sizing is available only for large-quantity orders. Pole caps may be used in place of other mounting options when required.
Composite light poles are covered by a 15-year workmanship warranty, which warrants that the poles are free from manufacturing defects-including weld and structural integrity issues-at the time of shipment. Any pole found to be defective, upon examination, during normal use and service within 15 years from the date of shipment will be repaired or replaced at our discretion. This warranty does not cover damage resulting from external factors, misuse, or normal wear and tear.
Web ID: 2343
Product Overview
This 25 Foot Round Fiberglass Light Pole with a 6 Inch Diameter and anchor base is designed for outdoor area and sports lighting in environments requiring high wind zone performance and corrosion resistance. The fiberglass construction provides a non-conductive, lightweight alternative to steel or aluminum, suitable for coastal, corrosive, and utility applications. Typical installations include sports fields, campus areas, and sites exposed to salt air or chemical exposure where metal poles are prone to corrosion.
The pole supports mounting heights up to 25 feet and is engineered for use with area, roadway, and sports lighting fixtures. The anchor base design allows for straightforward installation on new or existing concrete foundations. Multiple color options and an acrylic enamel finish provide flexibility for site requirements and visual standards.
Core Performance and Output
This fiberglass pole is rated for a maximum EPA (Effective Projected Area) of 12 at 70 mph, 7.5 at 110 mph, 5.5 at 130 mph, and 3 at 160 mph. These ratings define the total surface area of fixtures and brackets the pole can safely support at each wind speed. The 6-inch diameter and 104 lb weight provide a balance of structural strength and manageable handling during installation.
The pole is suitable for mounting single or multiple luminaires, including large area flood lights or sports lighting heads, within the EPA and weight limits. At the full 25-foot height, fixture selection and bracket configuration must be matched to wind load ratings to avoid overstressing the pole in high wind zones. Excessive fixture EPA or mounting large banners is not recommended at maximum height or in exposed locations.
Adjustability and Control Options
The pole is compatible with standard lighting fixture mounting hardware, including tenons, side arms, and direct bolt-on brackets. The anchor base allows for precise alignment during installation and field adjustment for plumb. Fixture orientation and aiming are determined by the selected mounting accessories and are not limited by the pole design.
No integrated electrical controls or access panels are included. All wiring and control devices must be installed per fixture and site requirements. The non-conductive fiberglass construction provides inherent electrical isolation for added safety in utility and sports field environments.
Longevity and Reliability
The fiberglass material resists corrosion from salt, chemicals, and moisture, making it suitable for coastal, marina, and wastewater sites. The acrylic enamel finish protects against UV degradation and surface wear. The pole is not subject to rust or galvanic corrosion common with steel or aluminum poles in harsh environments.
A 15-year warranty covers structural integrity and finish. The pole is designed for long-term outdoor exposure with minimal maintenance. Periodic inspection for surface damage and hardware condition is recommended, especially in high wind or corrosive locations.
Build Quality and Physical Characteristics
This pole is constructed from high-strength fiberglass with a uniform 6-inch round profile and weighs 104 lbs. The anchor base design uses an 8-inch bolt circle and 2.75-inch bolt projection for secure foundation attachment. The pole is available in bronze, black, white, gray, or custom colors to match site requirements.
The acrylic enamel finish provides a smooth, durable surface. The non-conductive nature of fiberglass eliminates the risk of stray voltage or ground faults through the pole body. The pole is suitable for direct exposure to weather, salt spray, and chemical atmospheres.
Where This Product Fits Best
This 25-foot fiberglass pole is intended for outdoor lighting in environments where corrosion resistance, non-conductivity, and high wind performance are required. It is commonly used in sports field, campus, and utility applications where metal poles are not suitable due to environmental exposure.
- baseball field lighting
- football field lighting
- sports field lighting
- coastal lighting
- corrosive environment lighting
- marina lighting
- wastewater facility lighting
- area lighting
The pole is designed for direct exposure to salt air, chemicals, and high winds. It is not affected by rust or galvanic corrosion and is suitable for both new construction and retrofit projects in demanding outdoor environments.
Installation and Long-Term Use
The anchor base design allows for installation on standard concrete foundations using an 8-inch bolt circle. The 104 lb weight can be managed by a two-person crew with standard lifting equipment. All mounting hardware and anchor bolts must be specified to match wind load and fixture requirements.
Routine maintenance is limited to inspection of the finish and hardware. The pole does not require painting or galvanizing. In corrosive or coastal sites, periodic cleaning may be needed to remove salt or chemical deposits. The non-conductive body reduces electrical hazard risk during maintenance or fixture replacement.
How This Fixture Is Commonly Used
Poles of this size are typically installed at 25-foot mounting heights for sports field, area, and utility lighting. Fixture spacing and layout depend on the lighting design, fixture EPA, and wind zone requirements. Multiple poles are often used to provide uniform coverage for fields or large outdoor areas.
Fixture count and bracket configuration must be coordinated with the EPA and wind load ratings. Using higher EPA fixtures or multiple heads per pole may require reducing mounting height or increasing foundation size. In high wind zones, conservative fixture selection is recommended to maintain structural safety.
Safety, Certifications, and Warranty
The pole is non-conductive and suitable for use in environments with electrical hazard concerns. It is rated for high wind zones with published EPA values at 70, 110, 130, and 160 mph. The acrylic enamel finish is UV resistant and suitable for outdoor exposure.
15-year warranty. No additional certifications are specified for this product.
Frequently Asked Questions
Q: What is the maximum EPA this pole can support at 25 feet?
A: The maximum EPA is 12 at 70 mph, 7.5 at 110 mph, 5.5 at 130 mph, and 3 at 160 mph. Fixture and bracket selection must not exceed these values.
Q: Is this pole suitable for coastal or corrosive environments?
A: Yes, the fiberglass construction and acrylic enamel finish are resistant to corrosion from salt, chemicals, and moisture.
Q: What type of foundation is required for installation?
A: The anchor base requires a concrete foundation with an 8-inch bolt circle and 2.75-inch bolt projection. Anchor bolts must be specified for the wind load and site conditions.
Q: Can this pole be used for multiple fixtures or cross arms?
A: Yes, as long as the total EPA and weight of all fixtures and brackets do not exceed the pole?s rated limits for the site wind speed.
Q: How should fixture spacing and pole layout be planned?
A: Spacing and layout depend on the lighting design, fixture EPA, and wind zone. Higher EPA fixtures may require wider spacing or reduced mounting height to stay within structural limits.
Application Questions and Clarification
Q: Is this pole appropriate for marina or waterfront lighting?
A: Yes, the fiberglass material and finish are suitable for marina, coastal, and waterfront environments where corrosion is a concern.
Q: Can this pole be used for sports field lighting in high wind zones?
A: Yes, provided the total EPA of fixtures and brackets does not exceed the rated values for the site wind speed. Always verify wind zone requirements before installation.
Q: Is this pole recommended for roadway or campus area lighting?
A: Yes, this pole is suitable for roadway and campus area lighting, especially where corrosion resistance or non-conductivity is required.
Q: Are there color options available for this pole?
A: Yes, standard colors include bronze, black, white, gray, and custom colors by request.
