100 Watt Explosion Proof LED Light | 15000 Lumens | Class 1 Div 2 | Class 2 Div 2 | 5000K | 100-277V

Product Overview

This 240 Watt round explosion proof LED fixture delivers 33,600 lumens at 5000K. It is designed for hazardous locations requiring Class 1 Division 2, Class 2 Division 1 and 2, and Class 3 protection. The fixture is also rated for Zone 2, Zone 20, Zone 21, and Zone 22 environments.

The fixture operates on 100-277V input and supports 1-10V dimming. It uses a tempered glass lens and a powder coated aluminum housing. The standard beam angle is 120 degrees. The fixture is gray in color and weighs 20 lbs.

It is rated for wet locations under UL844, UL1598, and UL1598A. The fixture is also CSA, ATEX, and IECEX listed. The expected lifespan is 150,000 hours (L70).

Mounting options include yoke or 3/4 inch NPT pendant, with additional pendant or surface mounting available. No cord is supplied with the fixture.

Where This Product Fits Best

This fixture is suitable for hazardous locations where explosive gases, vapors, or dusts may be present under abnormal conditions. It is appropriate for facilities requiring Class 1 Division 2, Class 2 Division 1 or 2, or Class 3 rated lighting.

Common environments include chemical processing, oil and gas, grain handling, and other industrial sites with classified areas. The IP66 rating allows use in areas exposed to water, dust, or high humidity.

The fixture can be used indoors or outdoors where wet location and hazardous area ratings are required. The 240 watt output is intended to replace 1000 watt metal halide fixtures in similar applications.

Mounting flexibility supports installation on ceilings, walls, or pendant drops, depending on site requirements and available infrastructure.

Performance and Functional Considerations

This fixture provides 33,600 lumens at 140 lumens per watt, supporting high visibility in large or high-ceiling spaces. The 5000K color temperature delivers a neutral white light suitable for task and general area lighting.

The fixture supports 1-10V dimming for output adjustment when compatible controls are present. Power factor is greater than 0.90 and total harmonic distortion is less than 10%.

Surge protection is rated at 10kV. The tempered glass lens and powder coated aluminum housing provide durability in demanding environments.

The fixture is rated IK08 for impact resistance and IP66 for protection against dust and powerful water jets. The 150,000 hour L70 lifespan supports long-term use with minimal maintenance.

Installation and Long-Term Use

Mounting options include yoke or 3/4 inch NPT pendant as standard, with optional pendant or surface mounting. The fixture does not include a cord, so field wiring is required at installation.

The 20 lb weight and 9.7 x 15 inch dimensions should be considered when planning mounting points and support structures. The fixture is designed for use in wet locations and hazardous areas as specified by its UL, CSA, ATEX, and IECEX listings.

Routine cleaning and inspection are supported by the powder coated aluminum housing and tempered glass lens. The IP66 and IK08 ratings allow for use in environments with dust, water, and moderate physical impacts.

The fixture is covered by a 5 year warranty, with an optional 10 year warranty available.

How This Fixture Is Commonly Used

Once installed, this fixture provides consistent, high-output lighting in hazardous locations. The 1-10V dimming allows you to adjust light levels if your facility uses compatible dimming controls.

The fixture?s wide 120 degree beam angle distributes light broadly, reducing shadowing and supporting general area illumination. The 5000K color temperature is suited for tasks requiring clear visibility.

The powder coated aluminum housing and tempered glass lens hold up to routine cleaning and exposure to dust or water. The fixture can be mounted using yoke or pendant methods, depending on your site?s structure and clearance.

With a rated lifespan of 150,000 hours, the fixture is designed for long-term operation with minimal maintenance in demanding environments.

Safety, Certifications, and Warranty

This fixture is UL listed for Class 1 Division 2, Class 2 Division 1 and 2, and Class 3 hazardous locations. It is also CSA, ATEX, and IECEX listed.

The fixture is rated IP66 for dust and water protection and IK08 for impact resistance. It is UL844 listed for wet locations (UL1598 / UL1598A).

Surge protection is rated at 10kV. The fixture is covered by a 5 year warranty from LED Lighting Supply, with an optional 10 year warranty available.

Frequently Asked Questions

What voltage does this fixture support?
This fixture operates on 100-277V input.

What is the output and intended replacement?
The fixture delivers 33,600 lumens and is intended to replace 1000 watt metal halide fixtures.

What environmental ratings does this fixture carry?
The fixture is rated IP66 for dust and water protection and IK08 for impact resistance. It is UL844 listed for wet locations.

What mounting options are available?
Standard mounting options are yoke or 3/4 inch NPT pendant. Optional pendant or surface mounting is also supported.

What certifications does this fixture have?
This fixture is UL, CSA, ATEX, and IECEX listed.

What is the warranty coverage?
The fixture is covered by a 5 year warranty, with an optional 10 year warranty available.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.