100 Watt High Temperature Light | 15000 Lumens | 5000K | 100-2777V | Rated to 212F

Product Overview

This 100 watt high temperature LED fixture is built for continuous operation in environments ranging from -40°F up to 212°F. It produces 15,000 lumens at a 5000K color temperature and is designed to replace 400 watt metal halide fixtures.

The fixture uses an aluminum alloy housing with a large heat sink to manage thermal loads in both extreme hot and cold conditions. It operates on 100V to 277V input and supports 50/60 Hz frequency.

Beam angle options include 25°, 40°, 60°, and 90°, with a polycarbonate lens for durability. The fixture is available in gray and weighs 14.5 lbs, with dimensions of 13.14 x 10.31 x 5.11 inches.

Mounting options include eye-hook, pendant, or trunnion, allowing for flexibility in installation based on site requirements.

Where This Product Fits Best

This fixture is suited for locations where ambient temperatures can reach up to 212°F or drop as low as -40°F. It is appropriate for industrial, manufacturing, or processing areas with high heat loads or exposure to temperature extremes.

With an IP66 rating, the fixture can be used in environments where dust and water exposure are present. The 6kV surge protection supports use in facilities with electrical noise or transient voltage events.

It is designed for indoor or covered outdoor spaces where a 400 watt metal halide replacement is needed and where high lumen output is required for visibility and safety.

Facilities with existing 100V to 277V power infrastructure can integrate this fixture without additional voltage adaptation.

Performance and Functional Considerations

The fixture delivers 150 lumens per watt, providing efficient output for high bay and task lighting applications. The 70+ CRI supports general visibility and color recognition in industrial settings.

Beam angle selection (25°, 40°, 60°, 90°) allows for control over light distribution, from narrow to wide coverage, depending on mounting height and area requirements.

The polycarbonate lens resists impact and maintains clarity in demanding environments. The fixture?s power factor is greater than 0.95, and total harmonic distortion is less than 15%.

Rated lifespan is 50,000 hours (L70), supporting long-term use with minimal maintenance in continuous operation scenarios.

Installation and Long-Term Use

Mounting options include eye-hook, pendant, or trunnion, supporting installation on ceilings, beams, or structural supports. The fixture?s weight and dimensions should be considered when planning mounting hardware and locations.

The aluminum alloy housing and large heat sink are designed for thermal management in high temperature areas, reducing risk of overheating and supporting consistent performance.

IP66 rating allows for installation in areas exposed to dust and water jets, such as washdown zones or processing lines. The fixture?s surge protection supports use in facilities with unstable power conditions.

Routine inspection should focus on lens clarity and heat sink cleanliness to maintain optimal performance over the fixture?s rated lifespan.

How This Fixture Is Commonly Used

Once installed, you can select the beam angle that matches your area?s lighting needs?narrow for focused tasks or wide for general coverage. The fixture?s output and color temperature provide consistent, bright illumination for work areas, aisles, or production lines.

In day-to-day operation, the fixture runs without the need for dimming or control adjustments. The robust housing and lens handle exposure to dust, water, and temperature swings without requiring frequent maintenance.

Operators rely on the fixture for steady light output in environments where heat or cold would damage standard lighting. The fixture?s design supports uninterrupted operation during extended shifts or continuous processes.

Maintenance teams typically monitor for buildup on the heat sink or lens and address as needed to maintain light quality and fixture longevity.

Safety, Certifications, and Warranty

This fixture is ETL listed.

It carries an IP66 rating, allowing use in areas exposed to dust and powerful water jets.

Surge protection is rated to 6kV, supporting use in facilities with electrical disturbances.

Warranty coverage is provided by LED Lighting Supply.

Frequently Asked Questions

What voltage does this fixture support?
This fixture operates on 100V to 277V input.

What is the rated output?
The fixture produces 15,000 lumens at 100 watts.

What environments can this fixture be used in?
It is rated for operation in temperatures from -40°F to 212°F and carries an IP66 rating for dust and water exposure.

What mounting options are available?
Mounting options include eye-hook, pendant, or trunnion.

Is this fixture ETL listed?
Yes, this fixture is ETL listed.

What is the warranty coverage?
Warranty is provided by LED Lighting Supply.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.