100 Watt LED Full Cutoff Wall Pack | 13000 Lumens | 5000K | 100-277V | Built-In Photocell

Product Overview

This 100 watt LED full cutoff wall pack is designed for exterior wall mounting where dark sky compliance is required. The fixture delivers 13,000 lumens at 5000K and operates on 100-277V input power. It is intended as a direct replacement for 250 watt metal halide wall packs.

The housing is constructed from die-cast aluminum with a bronze finish and features a removable hinge door for access. The lens is made from impact-resistant polycarbonate. The fixture includes a built-in photocell, which can be disabled using the provided cap.

The wall pack has a 155x95 degree beam angle and a CRI of 70+. It is rated for a 50,000 hour lifespan and is designed for wall mounting only. The fixture measures 14.1 inches long, 9.25 inches high, and 9.64 inches deep.

Power factor is greater than 0.90 and total harmonic distortion is less than 20%. The fixture operates at 50-60Hz frequency.

Where This Product Fits Best

This wall pack is suited for exterior building perimeters, loading docks, and entryways where full cutoff optics are required to prevent uplight. It is appropriate for locations where dark sky compliance is a priority.

It is designed for use in commercial and industrial environments that previously used 250 watt metal halide wall packs. The fixture?s output and distribution are suitable for general area illumination along building facades.

The IP66 rating allows installation in areas exposed to rain, dust, and other outdoor elements. The fixture is not intended for interior use or for mounting methods other than wall installation.

Use this fixture where a 5000K color temperature and 100-277V compatibility are required.

Performance and Functional Considerations

The fixture delivers 13,000 lumens at 100 watts, providing a 130 lumens per watt efficacy. The 155x95 degree beam angle supports wide area coverage along building walls without producing uplight.

The built-in photocell enables dusk-to-dawn operation and can be disabled with the included cap if needed. The fixture does not support dimming or motion sensor integration.

The die-cast aluminum housing and polycarbonate lens provide durability against impact and environmental exposure. The fixture is rated for 50,000 hours of operation, supporting long-term use with minimal maintenance.

Power factor above 0.90 and THD below 20% support stable operation on commercial electrical systems. The fixture is compatible with 100-277V input and operates at 50-60Hz.

Installation and Long-Term Use

This wall pack is designed for direct wall mounting. The removable hinge door and multiple points of entry allow for straightforward wiring and access during installation or maintenance.

The IP66 rating means the fixture can be installed in outdoor locations exposed to rain, dust, and debris. The die-cast aluminum housing resists corrosion and physical damage.

The impact-resistant polycarbonate lens protects the LEDs from accidental contact and weather. The fixture?s bronze finish is intended for exterior architectural applications.

Routine maintenance is limited to periodic cleaning and inspection. The built-in photocell can be disabled by covering it with the included cap if photocell operation is not desired.

How This Fixture Is Commonly Used

Once installed, this fixture provides consistent perimeter lighting with no visible uplight, supporting dark sky compliance. The full cutoff design prevents light from spilling above the horizontal plane, reducing glare and light trespass.

The built-in photocell allows the fixture to operate automatically from dusk to dawn. If you need the fixture to operate independently of ambient light, you can disable the photocell using the supplied cap.

The fixture?s wide beam angle distributes light evenly along building walls and adjacent areas. The polycarbonate lens and robust housing withstand impacts and weather exposure, minimizing the need for frequent repairs or replacements.

After installation, day-to-day interaction is limited to visual inspection and cleaning. The fixture is not adjustable for beam direction or output.

Safety, Certifications, and Warranty

This fixture is UL listed.

The product is rebate eligible.

The fixture is rated IP66, allowing use in wet and dusty outdoor environments.

LED Lighting Supply provides warranty coverage as stated in the product documentation.

Frequently Asked Questions

What voltage does this fixture support?
This fixture operates on 100-277V input.

What is the lumen output and wattage?
The fixture delivers 13,000 lumens at 100 watts.

Is this fixture suitable for outdoor use?
The fixture is rated IP66 for outdoor environments exposed to rain and dust.

What mounting method is supported?
This fixture is designed for wall mounting only.

Is this fixture UL listed and rebate eligible?
This fixture is UL listed and rebate eligible.

What is the warranty coverage?
LED Lighting Supply provides warranty coverage as stated in the product documentation.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.