100 Watt LED Wall Pack | 13695 Lumens | 5000K | 100-277V | Forward Throw | Built-In Photocell

Product Overview

This 100 Watt LED wall pack delivers 13,695 lumens at 5000K. It is designed for forward throw applications and operates on 100-277V input power. The fixture includes a built-in photocell for dusk-to-dawn operation.

The housing is heavy-duty die-cast aluminum with a bronze polyester powder finish. The lens is tempered glass, and the fixture uses a polycarbonate optic. The removable hinge door and multiple points of entry support straightforward installation.

This wall pack is built for outdoor use and is rated for impact, corrosion, and UV resistance. The fixture measures 13.1 inches long, 9.5 inches wide, and 7.5 inches high.

It is designed to replace 400 Watt metal halide wall packs and is suitable for locations requiring a 120° beam angle and a CRI of 75+.

Where This Product Fits Best

This wall pack is suitable for exterior wall mounting in commercial and industrial environments. It is designed for building perimeters, loading docks, walkways, and security lighting where forward throw distribution is needed.

The fixture is appropriate for areas exposed to weather, dust, and moisture. The IP65 rating allows use in environments where water jets or heavy rain may be present.

It is compatible with electrical systems operating from 100V to 277V. The operating temperature range of -40°F to 122°F supports use in both hot and cold climates.

The built-in photocell supports applications requiring automatic dusk-to-dawn operation without additional controls.

Performance and Functional Considerations

This fixture outputs 13,695 lumens at 137 lumens per watt. The 5000K color temperature provides a daylight-white appearance suitable for visibility and security.

The power factor is greater than 0.90, and total harmonic distortion is less than 20%. The fixture is non-dimming and operates at 50-60Hz.

The 120° beam angle provides wide area coverage. The forward throw design directs light outward from the wall, reducing shadowing near the mounting surface.

The fixture is rated for 50,000 hours of use. The die-cast aluminum housing and tempered glass lens provide durability in demanding environments.

Installation and Long-Term Use

The fixture mounts directly to the wall. Multiple points of entry and a removable hinge door allow for flexible conduit routing and simplified wiring access.

1/2 inch threaded conduit entry with a coin plug is provided. The fixture is designed for quick installation by experienced personnel familiar with wall pack mounting.

The IP65 rating protects against dust and water ingress, supporting long-term reliability outdoors. The bronze polyester powder finish resists corrosion and UV degradation.

Routine maintenance is minimized by the sealed housing and long LED lifespan. The built-in photocell automates operation, reducing manual intervention.

How This Fixture Is Commonly Used

Once installed, this wall pack provides consistent forward-throw illumination for building exteriors, walkways, and loading areas. The 5000K color temperature supports clear visibility at night and in low-light conditions.

The built-in photocell enables the fixture to operate automatically from dusk to dawn. You do not need to manually switch the fixture on or off for daily operation.

The fixture?s wide beam angle covers large areas, reducing the number of fixtures needed along a building perimeter. The robust housing and lens withstand impacts and exposure to the elements.

After installation, routine checks are limited to visual inspection, as the fixture is sealed and designed for minimal maintenance over its rated life.

Safety, Certifications, and Warranty

This fixture is UL listed.

The product is rebate eligible.

LED Lighting Supply provides warranty coverage as stated in our warranty terms.

The IP65 rating allows use in outdoor environments exposed to dust and water jets. The fixture operates safely in temperatures from -40°F to 122°F.

Frequently Asked Questions

What voltage does this wall pack support?
This fixture operates on 100V to 277V input power.

What is the lumen output and wattage?
The fixture delivers 13,695 lumens at 100 watts.

Is this fixture suitable for outdoor use?
Yes, the IP65 rating allows use in outdoor environments exposed to dust and water jets.

What mounting method is supported?
This fixture is designed for wall mounting with multiple points of entry and a removable hinge door.

Is this fixture UL listed and rebate eligible?
This fixture is UL listed and rebate eligible.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.