1 Fixture Wood Pole Bullhorn Wrap Mount | 2 3/8 Inch Tenon | Bronze

Product Overview

This 1 Fixture Wood Pole Bullhorn Wrap Mount is designed to provide a secure and stable mounting solution for a single area or post top fixture on wood utility poles. The mount features a 2 3/8 inch tenon and is constructed from galvanized steel with a bronze powder-coated finish for durability in outdoor environments. It is engineered to fit wood poles with diameters from 7 to 10 inches, supporting up to 200 pounds of fixture weight. Typical use includes mounting area lights or post top fixtures on wood poles in sports fields, parking lots, or municipal sites where steel pole infrastructure is not present.

The wrap-around design allows for either side or top mounting, accommodating a range of fixture types that utilize a standard 2 3/8 inch tenon. This mount is commonly used as part of new installations or retrofit projects where wood poles are already in place and a robust, corrosion-resistant mounting solution is required.

Core Performance and Output

This bullhorn mount is rated to support fixtures up to 200 pounds, with a tenon size of 2 3/8 inches compatible with most area, flood, and sports lighting heads. The galvanized steel construction provides structural integrity and resistance to corrosion in outdoor settings. The mount?s design ensures stable fixture positioning and load distribution around the pole circumference, minimizing stress on the wood pole itself.

EPA (Effective Projected Area) and wind load performance are determined by the fixture and pole combination; always verify that the total fixture EPA and weight do not exceed the pole?s structural limits. Excessive fixture size or mounting at extreme heights may require additional engineering review to ensure long-term stability and safety.

Adjustability and Control Options

This mount provides fixed orientation for a single fixture, with the tenon allowing for standard slipfitter or yoke-mount fixture attachment. The wrap design enables mounting on either the side or top of the wood pole, offering flexibility in aiming and fixture placement. No integrated tilt or rotation adjustment is provided by the mount itself; fixture aiming is determined by the attached fixture?s mounting hardware.

No electrical control or wiring features are included. All fixture wiring and controls must be managed separately according to fixture and site requirements.

Longevity and Reliability

The mount is fabricated from galvanized steel and finished with a bronze powder coat for enhanced corrosion resistance. This construction is suitable for long-term outdoor exposure in most climates, including areas with high humidity or precipitation. The mechanical design minimizes points of failure and does not rely on moving parts or complex assemblies.

Routine inspection of mounting hardware and pole condition is recommended as part of ongoing maintenance, especially in environments with high wind or corrosive exposure. The product carries a 1-year warranty covering material and workmanship.

Build Quality and Physical Characteristics

The mount weighs 20 pounds and is designed to wrap securely around wood poles with diameters from 7 to 10 inches. All structural components are galvanized steel, providing strength and resistance to rust. The bronze powder-coated finish offers additional protection and a neutral appearance suitable for most site aesthetics.

The 2 3/8 inch tenon is compatible with standard slipfitter and yoke-mount fixtures. All mounting hardware is designed for outdoor use and to maintain secure attachment under typical wind and load conditions. No electrical components are included.

Where This Product Fits Best

This bullhorn wrap mount is intended for use in outdoor environments where wood utility poles are present and a single area or post top fixture needs to be securely mounted. It is commonly used in sports field lighting, rural area lighting, and municipal or utility installations where steel or concrete poles are not available or practical.

• baseball field lighting
• softball field lighting
• soccer field lighting
• football field lighting
• sports field lighting
• area lighting
• parking lot lighting
• municipal lighting

The mount is suitable for outdoor use in a range of climates. Galvanized steel and powder coating provide resistance to weather and corrosion. Always confirm pole condition and structural capacity before installation.

Installation and Long-Term Use

Installation requires wrapping the mount around a wood pole with a diameter between 7 and 10 inches and securing it with the included hardware. The tenon accepts fixtures with standard slipfitter or yoke mounts. Side or top mounting is possible, depending on site requirements and desired fixture orientation.

Long-term use depends on periodic inspection of both the mount and the wood pole for signs of wear, corrosion, or structural degradation. The mount is designed for minimal maintenance, but fixture weight and wind loading should be reviewed if site conditions change or if fixtures are upgraded.

How This Fixture Is Commonly Used

This mount is typically installed at heights ranging from 20 to 40 feet, depending on the application and pole height. Fixture spacing and layout are determined by the lighting design and the specific requirements of the field, lot, or area being illuminated. The mount supports a single fixture, so multiple mounts may be used on a single pole for multi-directional coverage.

Spacing and aiming are influenced by fixture wattage, beam angle, and site geometry. Higher output fixtures may reduce the number of poles required but can increase wind load and glare if not properly aimed.

Safety, Certifications, and Warranty

This product does not carry electrical ratings or third-party certifications. All structural and material specifications are based on manufacturer standards for galvanized steel hardware. The mount is covered by a 1-year warranty against defects in materials and workmanship.

Always follow site safety protocols during installation, and verify that the pole and mounting hardware are suitable for the intended fixture weight and wind loading. No electrical components are included; all wiring and fixture installation must comply with local codes and standards.

Frequently Asked Questions

Q: What size wood poles does this bullhorn mount fit?

A: It fits wood poles with diameters from 7 to 10 inches.

Q: What is the maximum fixture weight this mount can support?

A: The mount supports up to 200 pounds of fixture weight.

Q: What tenon size does this mount provide?

A: The tenon is 2 3/8 inches in diameter, compatible with standard slipfitter and yoke-mount fixtures.

Q: Can this mount be installed on the side or top of the pole?

A: Yes, it can be mounted on either the side or top of the wood pole.

Q: Is this mount suitable for use in coastal or high-humidity environments?

A: The galvanized steel and powder-coated finish provide corrosion resistance for most outdoor environments, including high humidity. Inspect regularly in coastal areas.

Q: Does this mount include any electrical components or wiring provisions?

A: No, it does not include electrical components. All wiring must be managed separately.

Q: How should I plan fixture spacing and pole layout when using this mount?

A: Fixture spacing and pole layout depend on the lighting design, fixture output, and site requirements. Review wind load and pole capacity for each installation.

Application Questions and Clarification

Q: Is this mount compatible with all area and sports lighting fixtures?

A: It is compatible with fixtures that use a 2 3/8 inch tenon and do not exceed 200 pounds. Always verify fixture mounting requirements.

Q: Can this mount be used for multi-fixture installations?

A: This model is designed for a single fixture. For multiple fixtures, use additional mounts or a multi-arm solution.

Q: What maintenance is required for long-term reliability?

A: Periodically inspect the mount and pole for corrosion, hardware tightness, and structural integrity, especially after severe weather events.

Q: Are there any certifications or listings for this product?

A: No, this product does not carry electrical ratings or third-party certifications.