3 Fixture 180 Degree Bullhorn Mount | 2 3/8 Inch Tenon | Bronze | Low Profile
This 3-fixture, 180 degree triple bullhorn mount is a practical choice when you need to install three fixtures on a single pole with a 2 3/8 inch tenon, offering broad, even light distribution ideal for parking lots, perimeter lighting, and large outdoor areas. Its 1.6 EPA and 28 lb weight are important for ensuring pole and wind load compatibility, and the bronze finish is well-suited for outdoor environments. The mount's design allows for flexible fixture aiming within a 180 degree spread.
Dwayne Kula | President, CTO and Founder
77 in stock
Product Specifications
Key Features
| Brand | LED Lighting Supply |
| Type | 3 fixture bull horn 180 degrees |
| Color | Bronze |
| Tenon Size | 2 3/8 inch |
| EPA | 1.6 |
| Weight | 28 lbs |
| Warranty | 1 year |
Product Overview
This 3-fixture, 180-degree bullhorn mount installs on a 2 3/8 inch tenon and supports three pole-mounted fixtures in a low-profile arrangement. The bronze mount positions fixtures across a half-circle layout.
The assembly is intended for projects requiring multiple fixtures from a single tenon location. Its EPA rating is 1.6, and the mount weighs 28 lbs.
Core Performance and Output
This bullhorn mount provides three fixture mounting positions across a 180-degree configuration. Fixture output, beam distribution, and electrical performance depend on the fixtures installed on the mount.
The combined fixture EPA must remain within the mount’s EPA 1.6 rating. Fixture weight, wind loading, and pole capacity need to be evaluated as a complete assembly.
Adjustability and Control Options
The mount has a fixed three-fixture, 180-degree configuration. It does not provide adjustable fixture positions within the supplied product data.
Controls, dimming, sensors, and electrical connections are determined by the fixtures installed on the bullhorn mount. The mount itself is a mechanical pole-top component.
Longevity and Reliability
The bronze finish provides a consistent exterior appearance for pole-mounted installations. Long-term reliability depends on proper tenon fitment, secure fixture attachment, and compliance with the EPA limit.
The supplied warranty is one year. Routine inspection should include mounting hardware, fixture attachment points, and the condition of the pole-top assembly.
Build Quality and Physical Characteristics
This is a low-profile triple bullhorn mount with a bronze finish. It is built for installation on a 2 3/8 inch tenon.
The mount weighs 28 lbs and has an EPA rating of 1.6. Its three-fixture layout requires a pole and tenon arrangement that can support the complete mounted assembly.
Where This Product Fits Best
This mount fits pole-mounted lighting layouts where three fixtures need to cover different directions from one pole-top location. It is applicable where the pole, tenon, fixtures, and combined EPA loading are matched.
- sports field lighting
- baseball field lighting
- softball field lighting
- soccer field lighting
- football field lighting
- driving range lighting
The 180-degree layout is suited to installations requiring fixtures to face across a defined side of the pole. Fixture aiming and total projected area affect the final pole-top loading.
Installation and Long-Term Use
Install this mount on a compatible 2 3/8 inch tenon. Verify the pole, tenon, bullhorn mount, fixtures, and mounting hardware as one structural assembly before installation.
Mounting height is determined by the pole design and lighting layout. The combined fixture EPA must not exceed 1.6, and fixture aiming should be finalized before the pole-top assembly is secured.
How This Fixture Is Commonly Used
This bullhorn mount is used to place three fixtures across a 180-degree spread from one pole-top location. Fixture aiming is set to direct light across the required field or range layout.
Mounting height and fixture spacing are determined by the pole layout, fixture distribution, and target light levels. Three fixtures from one mount can reduce pole locations in a layout, but the combined EPA loading remains limited to 1.6.
Safety, Certifications, and Warranty
The supplied product data lists an EPA rating of 1.6. No certifications are provided in the supplied information.
This bullhorn mount includes a one-year warranty. Installation should confirm secure tenon engagement and complete fixture mounting before energizing the installed fixtures.
Frequently Asked Questions
Q: What tenon size does this bullhorn mount require?
A: This mount installs on a 2 3/8 inch tenon.
Q: How many fixtures does this bullhorn mount support?
A: This is a three-fixture bullhorn mount.
Q: What is the fixture arrangement?
A: The mount positions three fixtures in a 180-degree configuration.
Q: What EPA rating applies to this mount?
A: The EPA rating is 1.6.
Q: What should be considered when planning fixture layout on this mount?
A: Fixture selection, aiming, pole capacity, and combined fixture EPA must be evaluated. The combined fixture EPA must remain within the mount’s EPA 1.6 rating.
Application Questions and Clarification
Q: Can this mount be used for sports field lighting?
A: Sports field lighting is a valid application when the pole, 2 3/8 inch tenon, fixture mounting arrangement, and combined EPA loading are compatible.
Q: What should be confirmed before using this mount for baseball field lighting or softball field lighting?
A: Confirm the 2 3/8 inch tenon size, three-fixture configuration, pole capacity, and total fixture EPA. The mount is rated at EPA 1.6.
Q: What affects mounting height for soccer field lighting or football field lighting?
A: Mounting height is determined by the pole design and lighting layout. The supplied product data does not establish a specific mounting height.
Web ID: 2074
