3 Fixture 120 Degree Bullhorn Mount | 2 3/8 Inch Tenon | Bronze | Low Profile
This triple bullhorn mount is a practical solution for exterior or large-area lighting where three fixtures need to be positioned from a single pole, such as parking lots, sports courts, or perimeter lighting. Its fixed 120 degree arm spacing ensures broad, even coverage and minimizes shadowing, which is valuable for uniform illumination around a pole. The mount fits a 2 3/8 inch tenon and supports a combined EPA of 1.4 and 22 lbs, so wind load and pole strength must be considered.
Dwayne Kula | President, CTO and Founder
114 in stock
Product Specifications
Key Features
| Brand | LED Lighting Supply |
| Type | 3 fixture bull horn 120 degrees |
| Color | Bronze |
| Tenon Size | 2 3/8 inch |
| EPA | 1.4 |
| Weight | 22 lbs |
| Warranty | 1 year |
Product Overview
This low-profile triple bullhorn mount supports three fixtures in a fixed 120 degree arrangement. It mounts on a standard 2 3/8 inch tenon and uses a bronze finish.
The mount is intended for post top lighting and area lighting layouts that require three fixture heads from one pole-top location. Its 22 lb assembly weight and EPA 1.4 rating need to be included in the complete pole and fixture loading review.
Core Performance and Output
This mount provides three fixture positions distributed at 120 degrees around the tenon. The configuration supports broad directional coverage from a single mounting point rather than a single forward-facing fixture orientation.
EPA is rated at 1.4. Fixture weight, fixture EPA, pole capacity, and site wind conditions must be evaluated as a complete assembly.
The product data does not establish a mounting height range or fixture output limit. Higher mounting positions and larger fixture heads require project-specific structural review.
Adjustability and Control Options
The three fixture arms are fixed at 120 degrees. The bullhorn does not provide adjustable arm angles.
This mount does not include lighting controls, drivers, photocells, or dimming components. Controls are determined by the fixtures and control equipment used with the assembly.
Longevity and Reliability
The bronze finish is intended for a consistent pole-top appearance with compatible bronze fixture and pole components. The supplied product data does not state a corrosion rating or environmental ingress rating.
The warranty is one year. Long-term service access depends on the pole, fixture mounting arrangement, and fixture weight.
Build Quality and Physical Characteristics
This is a three-fixture bullhorn mount with a low-profile form factor. It mounts on a 2 3/8 inch tenon.
The assembly weighs 22 lbs. Confirm the existing tenon size before installation because this mount is designed specifically for a 2 3/8 inch tenon.
Where This Product Fits Best
This mount fits pole-top layouts requiring three fixture heads oriented around a central tenon. It is suited to applications where a 120 degree fixture pattern matches the required site coverage direction.
- post top lighting
- decorative site lighting
- pedestrian area lighting
- campus lighting
- area lighting
Application fit depends on the pole, tenon size, fixture dimensions, total fixture loading, and EPA requirements. The supplied data does not establish use in corrosive, hazardous, wet, or washdown environments.
Installation and Long-Term Use
Install the mount on a 2 3/8 inch tenon and secure it as required by the pole and mounting system. Verify that all three fixture positions clear adjacent fixtures, pole hardware, and site obstructions.
Review the full assembly load before installation, including the 22 lb mount weight, fixture weights, and fixture EPA values. The EPA 1.4 rating applies to the bullhorn mount.
How This Fixture Is Commonly Used
For post top lighting, decorative site lighting, and pedestrian area lighting, the three arms are arranged to direct fixtures into separate coverage zones from one pole-top position. Mounting height is determined by the pole design and lighting layout; no mounting height range is established by the supplied data.
Layouts typically use the fixed 120 degree arm pattern where three directions of coverage are needed. Fixture spacing and final layout vary with fixture output, optics, mounting height, and target light levels.
Safety, Certifications, and Warranty
No certifications are stated in the supplied product data. The mount has a one-year warranty.
Confirm tenon compatibility, total assembly loading, EPA requirements, and pole capacity before installation. Installation must account for the complete fixture and mounting assembly.
Frequently Asked Questions
Q: What tenon size does this triple bullhorn mount require?
A: This mount is designed for a 2 3/8 inch tenon.
Q: How are the three fixture positions arranged?
A: The mount uses three fixture positions arranged at 120 degrees.
Q: What is the EPA rating of this mount?
A: The EPA rating is 1.4.
Q: What should be reviewed when planning a three-fixture pole-top layout?
A: Review the 2 3/8 inch tenon size, the 22 lb mount weight, the EPA 1.4 rating, fixture weight, fixture EPA, pole capacity, and the required fixture directions.
Application Questions and Clarification
Q: Is this mount suitable for post top lighting?
A: The supplied product data identifies this triple bullhorn mount for post top lighting. The 120 degree three-fixture arrangement must align with the planned fixture directions.
Q: Can this mount be used for pedestrian area lighting or decorative site lighting?
A: Pedestrian area lighting and decorative site lighting are valid applications when the pole, tenon, fixture loading, and EPA requirements support the complete assembly.
Web ID: 2076
