3 Fixture 120 Degree Bullhorn Mount | 2 3/8 Inch Tenon | Bronze

Product Overview

This is a 3-fixture bull horn mount designed for use with lighting fixtures. The arms are set at 120 degrees to allow for even distribution of fixtures around a pole or mounting point.

The mount is finished in bronze and is built to accept a 2 3/8 inch tenon. The total weight of the assembly is 38 lbs.

EPA for this mount is 1.5. This value is relevant for wind load calculations and structural compatibility.

The product carries a 1-year warranty from LED Lighting Supply.

Where This Product Fits Best

This bull horn mount is intended for applications where three fixtures need to be installed on a single pole or mounting structure. The 120-degree arm spacing supports wide area coverage.

It is suitable for use in parking lots, outdoor sports areas, and other exterior environments where multiple fixtures are required on a single pole.

The bronze finish is commonly selected for outdoor environments and matches standard fixture and pole finishes.

Compatibility with a 2 3/8 inch tenon is required for proper installation.

Performance and Functional Considerations

The 120-degree arm spacing allows for fixtures to be aimed to cover a broad area without overlap. This is useful for perimeter or area lighting applications.

With an EPA of 1.5, the mount should be factored into total wind load calculations for the pole or structure. Ensure the supporting structure can accommodate the combined EPA of the mount and fixtures.

The 38 lb weight should be considered when planning installation and when evaluating pole loading limits.

This mount is designed for three fixtures. Overloading or modifying the mount is not supported.

Installation and Long-Term Use

The mount is designed to slip-fit over a 2 3/8 inch tenon. Confirm tenon compatibility before installation.

All mounting hardware and fixtures must be installed according to manufacturer instructions to ensure safety and stability.

The bronze finish provides a standard level of corrosion resistance for outdoor use. Inspect periodically for finish wear or corrosion, especially in harsh environments.

Routine inspection of mounting points and hardware is recommended to maintain long-term safety and performance.

How This Fixture Is Commonly Used

Once installed, this bull horn mount allows you to position three fixtures at 120-degree intervals. This setup is often used to provide even lighting coverage around a pole in parking lots or outdoor venues.

After installation, fixture aiming can be adjusted as needed to direct light where required. The fixed arm angles maintain consistent spacing and orientation.

In day-to-day operation, the mount does not require adjustment. Maintenance is limited to periodic inspection of mounting hardware and finish condition.

The bronze color blends with most standard outdoor poles and fixtures, maintaining a uniform appearance across the installation.

Safety, Certifications, and Warranty

This mount is designed for secure attachment to a 2 3/8 inch tenon and supports three fixtures. Follow all installation guidelines to ensure safe operation.

The EPA rating of 1.5 must be included in wind load and structural calculations for the supporting pole or structure.

LED Lighting Supply provides a 1-year warranty on this mount.

Frequently Asked Questions

What tenon size does this mount fit?
This mount is designed for a 2 3/8 inch tenon.

How many fixtures can be installed?
This mount supports three fixtures.

What is the EPA value?
The EPA is 1.5.

What is the weight of the mount?
The mount weighs 38 lbs.

What is the warranty period?
The mount carries a 1-year warranty from LED Lighting Supply.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.