2 Fixture 180 Degree Bullhorn | Wall Mount | Bronze
Dwayne Kula | President, CTO and Founder
193 in stock
Product Specifications
Key Features
| Brand | LED Lighting Supply |
| Type | Wall Mount Bullhorn |
| Color | Bronze |
| Tenon Size | 2 3/8 inch |
| Weight | 40 lbs |
| Warranty | 1 year |
Product Overview
This wall mount bullhorn supports two fixtures in a 180-degree arrangement from a wall-mounted location. It has 2 3/8 inch tenons, a bronze finish, and a listed product weight of 40 lbs.
The assembly is intended for post top lighting and architectural site lighting where two fixture positions are needed from one wall mounting point. The opposing fixture layout supports symmetrical directional placement from the mounting surface.
Core Performance and Output
This product is a structural mounting accessory and does not produce light output. Fixture output, distribution, voltage, and control performance depend on the fixtures installed on the two tenons.
The supplied product data identifies a 2 3/8 inch tenon size and a 40 lb product weight. It does not establish fixture weight limits, EPA ratings, wind-load ratings, or total supported fixture capacity.
Adjustability and Control Options
The bullhorn provides a fixed 180-degree fixture orientation. The two tenons position fixtures in opposite directions from the wall-mounted assembly.
No adjustable angle, dimming, sensor, photocell, or control features are listed for the bullhorn itself. Any control capability is determined by the installed fixtures and their associated equipment.
Longevity and Reliability
The bronze finish provides the listed exterior appearance for the assembly. Long-term condition depends on the wall mounting surface, installed fixture load, and exposure at the installation location.
This wall mount bullhorn includes a 1-year warranty. Routine inspection should confirm that the wall attachment and fixture-side connections remain secure.
Build Quality and Physical Characteristics
This is a wall mount bullhorn with two 2 3/8 inch tenons. The 180-degree configuration places one fixture connection on each side of the assembly.
The listed product weight is 40 lbs. The mounting surface and attachment method must account for the assembly weight and the installed fixtures.
Where This Product Fits Best
This accessory fits wall-mounted post top lighting and architectural site lighting layouts that require two fixture positions from one mounting point. Its 180-degree form is suited to layouts requiring opposing fixture direction.
- post top lighting
- architectural site lighting
- pedestrian area lighting
- decorative outdoor lighting
Wall condition, attachment design, fixture weight, and environmental exposure affect final installation suitability. The supplied data does not provide load or wind-performance ratings.
Installation and Long-Term Use
The assembly mounts to a wall and uses two 2 3/8 inch tenons for fixture connection. Installers need to verify that fixture connection requirements match the listed tenon size.
Mounting hardware, wall construction, and fixture support capacity are not identified in the supplied product data. Confirm these project-specific conditions before installation.
How This Fixture Is Commonly Used
For post top lighting and architectural site lighting, the bullhorn places two fixtures in opposing directions from a wall-mounted point. Mounting height is determined by the wall location and the lighting layout.
Fixture spacing and placement depend on the installed fixture output, distribution, target light levels, and site layout. The 180-degree arrangement can reduce the number of wall mounting points, but it requires a wall location that supports the intended opposing fixture pattern.
Safety, Certifications, and Warranty
No certifications are listed in the supplied product data.
This wall mount bullhorn includes a 1-year warranty. Installation should account for the listed 40 lb product weight and the load imposed by the installed fixtures.
Frequently Asked Questions
Q: What tenon size does this wall mount bullhorn use?
A: It uses 2 3/8 inch tenons.
Q: How many fixture positions does this bullhorn provide?
A: It provides two fixture positions in a 180-degree arrangement.
Q: What is the listed weight of the bullhorn?
A: The listed product weight is 40 lbs.
Q: What should be reviewed when planning the fixture layout?
A: Review the wall location, fixture output, distribution, target light levels, and the required opposing fixture directions. The supplied product data does not provide fixture spacing or coverage values.
Application Questions and Clarification
Q: Is this bullhorn intended for post top lighting?
A: Yes. The supplied product information identifies post top lighting as an intended use.
Q: Can this assembly be used for architectural site lighting?
A: Yes. Architectural site lighting is identified in the supplied product information.
Q: What wall mounting information is provided?
A: The product is identified as a wall mount bullhorn. Specific mounting hardware and wall attachment requirements are not listed in the supplied product data.
Web ID: 2719
