2 Fixture 180 Degree Bullhorn Mount | 2 3/8 Inch Tenon | Bronze

Product Overview

This 2 fixture bullhorn mount positions two area light fixtures in a 180-degree configuration, placing them on opposite sides of the pole for bidirectional coverage. The mount accepts fixtures with a 2 3/8 inch tenon and is finished in bronze to match common pole and fixture color schemes.

The mount weighs 24 pounds and carries an EPA rating of 0.9, which defines the wind load contribution this mount adds to the overall pole calculation. This is a structural mounting component only and does not include fixtures or the pole.

Where This Product Fits Best

This bullhorn mount is used where two fixtures need to illuminate areas on opposite sides of a single pole. Common scenarios include parking lot drive aisles, walkways between buildings, and perimeter roads where light is needed in both directions from a central pole location.

The 180-degree spread keeps both fixtures aligned along a straight axis. This differs from 90-degree or triple-arm configurations and should be selected based on where light needs to be directed from the pole position.

Performance and Functional Considerations

The 0.9 EPA value must be added to the EPA of each mounted fixture when calculating total wind load on the pole. Pole selection and foundation design require accurate EPA totals, especially in high wind zones or when mounting at greater heights.

The 2 3/8 inch tenon size is a standard dimension but must be confirmed against the slip fitter or tenon receiver of the fixtures being installed. Fixture compatibility depends on matching this tenon diameter exactly.

Installation and Long-Term Use

The mount attaches to a pole top or adapter and accepts fixtures via the two tenon arms. Installation requires lifting the mount into position and securing it before installing the fixtures. At 24 pounds, the mount is manageable but adds weight that must be considered during pole-top work.

The bronze finish is intended to resist weathering and maintain appearance over time in outdoor installations. No routine adjustment is expected after installation, as the fixture arms are fixed in their 180-degree orientation.

How This Fixture Is Commonly Used

Once installed, this mount holds two fixtures in a fixed back-to-back arrangement. Fixture aiming is handled at the fixture level, not at the mount. The mount itself does not pivot or adjust after installation.

Facilities typically use this configuration to cover linear areas from a single pole, reducing the number of poles needed along a roadway or path. The bronze color is selected to coordinate with existing site hardware or architectural standards.

Safety, Certifications, and Warranty

This mount is covered by a 1 year warranty.

No additional certifications are listed for this product. Structural suitability for a specific pole and wind zone should be verified based on the combined EPA of the mount and fixtures against the pole''s rated capacity.

Frequently Asked Questions

What tenon size does this mount use?
The mount has 2 3/8 inch tenons. Fixtures must have slip fitters or tenon receivers designed for this diameter.

What is the EPA of this mount?
The EPA is 0.9. This value must be included in total wind load calculations along with the EPA of both mounted fixtures.

What color is the mount?
This mount is bronze.

How long is the warranty?
The warranty period is 1 year.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.