50 Foot Stadium Light Pole | 2 Cross Arms | 115 MPH Wind Rating

Product Overview

We supply a 50 foot steel stadium light pole designed for sports lighting and large-area illumination projects. This pole is fabricated from 8 gauge S235 steel with a hot dip galvanized finish for corrosion resistance. The anchor base design supports secure installation in stadiums, airports, and similar high-mast environments. Two 10-foot cross arms are included for mounting multiple fixtures per pole. This configuration is commonly specified for new sports field lighting systems or major upgrades where tall mounting heights and robust wind performance are required.

With a 115 mph wind load rating and 8 anchor bolts, this pole is engineered for structural stability in open, exposed locations. The 50 foot height supports wide-area coverage and is suitable for mounting high-output LED sports flood lights or legacy HID fixtures. Typical installations include outdoor stadiums, airport aprons, and large athletic complexes.

Core Performance and Output

This 50 foot stadium light pole is rated for 115 mph wind loads, supporting demanding outdoor environments. The 8 gauge S235 steel construction and hot dip galvanized finish provide high structural strength and long-term corrosion resistance. The pole supports two 10-foot cross arms, allowing for multiple fixtures and flexible aiming patterns.

Maximum fixture weight and EPA (Effective Projected Area) limits depend on the number and type of luminaires installed. At 50 feet, wind loading and fixture EPA must be carefully calculated to avoid overstressing the pole. Excessive fixture count or large flood lights may require reduced mounting density or alternate pole sizing. This pole is not suitable for environments with wind speeds exceeding 115 mph or for mounting heights above 50 feet.

Adjustability and Control Options

The two included 10-foot cross arms provide flexibility for fixture placement and aiming. Each cross arm can accommodate multiple sports flood lights or area fixtures, depending on fixture size and EPA. The pole does not include integrated tilt or rotation mechanisms; adjustability is determined by the fixture mounting hardware and cross arm configuration.

Control systems, such as remote switching or dimming, are managed at the fixture or circuit level and are not integrated into the pole structure. Conduit entry and wiring access are provided through the anchor base and pole handholes for standard electrical connections.

Longevity and Reliability

The hot dip galvanized finish protects the steel pole from corrosion in outdoor and humid environments. S235 steel and 8 gauge wall thickness provide long-term structural integrity under normal use. The anchor base design allows for inspection and maintenance of anchor bolts and base plates over the life of the installation.

Routine inspection of the pole, cross arms, and anchor hardware is recommended, especially in high-wind or coastal environments. The 1 year warranty covers manufacturing defects. Galvanized surfaces may require periodic cleaning in aggressive environments to maintain appearance and corrosion resistance.

Build Quality and Physical Characteristics

This pole is constructed from 8 gauge S235 steel, weighing approximately 1000 lbs. The hot dip galvanized finish is applied after fabrication for full coverage and maximum corrosion protection. The pole is supplied with an anchor base, 8 anchor bolts (43 in length, 1.18 in diameter), and two 10-foot cross arms.

The pole diameter tapers from base to top, supporting both structural loads and fixture mounting. All welds and connections are designed for outdoor exposure and high wind loading. The cross arms are engineered for fixture mounting flexibility and are compatible with standard sports lighting brackets.

Where This Product Fits Best

This 50 foot stadium light pole is intended for large-scale outdoor lighting projects requiring elevated mounting heights and robust wind performance. It is commonly used in:

• sports facility lighting
• airport lighting
• parking lot lighting
• area lighting
• commercial site lighting
• industrial yard lighting
• dealership lighting
• campus lighting

The pole is suitable for open, exposed environments where wind loads are a primary concern. The galvanized finish and heavy-gauge steel construction support long-term use in outdoor stadiums, airports, and large commercial sites.

Installation and Long-Term Use

Installation requires a prepared concrete foundation with proper anchor bolt placement. The anchor base design allows for precise leveling and secure attachment. Lifting equipment is required due to the pole?s weight and length. Cross arms are typically installed at ground level before the pole is raised.

Long-term use depends on regular inspection of anchor bolts, base plates, and cross arm connections. In coastal or high-humidity environments, additional maintenance may be needed to prevent corrosion at hardware interfaces. The pole is designed for permanent installation and is not intended for temporary or portable use.

How This Fixture Is Commonly Used

Typical mounting height is 50 feet from grade to pole top. Cross arms are positioned to provide optimal fixture spacing for uniform field or area coverage. Fixture layout is determined by lighting design requirements, with spacing between poles based on target light levels and site geometry.

At this height, fewer poles may be needed for large area coverage, but fixture aiming and glare control become more critical. Higher mounting heights can reduce the number of fixtures required but may increase installation complexity and structural demands.

Safety, Certifications, and Warranty

This pole is manufactured to meet structural and wind load requirements for 115 mph wind zones. All welds and materials conform to industry standards for outdoor lighting poles. The hot dip galvanized finish provides corrosion resistance for exterior use.

Warranty coverage is 1 year for manufacturing defects. No additional certifications are specified for this product. Safety during installation requires adherence to lifting, rigging, and electrical best practices.

Frequently Asked Questions

Q: What is the maximum wind speed this pole can withstand?

A: The pole is rated for wind loads up to 115 mph.

Q: How many fixtures can be mounted on each cross arm?

A: Fixture count depends on the size and EPA of each fixture. The total EPA and weight must not exceed the pole?s structural limits.

Q: What type of foundation is required for installation?

A: A reinforced concrete foundation with properly placed anchor bolts is required. Foundation design should be based on site soil conditions and structural loads.

Q: Is the pole suitable for coastal or corrosive environments?

A: The hot dip galvanized finish provides corrosion resistance, but additional maintenance may be needed in aggressive environments.

Q: Can this pole be used for temporary or portable lighting?

A: No, this pole is designed for permanent installation only.

Q: How should fixture spacing and pole layout be determined?

A: Fixture spacing and pole layout should be based on lighting design requirements, target light levels, and site geometry.

Application Questions and Clarification

Q: Is this pole appropriate for sports field lighting at 50 foot mounting heights?

A: Yes, this pole is designed for sports facility lighting and supports 50 foot mounting heights with two cross arms for multiple fixtures.

Q: Can this pole be used for airport apron or large parking lot lighting?

A: Yes, the 50 foot height and wind rating make it suitable for airport lighting and large parking lot or area lighting applications.

Q: What are the main limitations for fixture selection on this pole?

A: Fixture selection is limited by total EPA and weight. Large or high-EPA fixtures may require reduced fixture count per cross arm.

Q: Is this pole compatible with LED sports flood lights?

A: Yes, the cross arms and structural design support standard LED sports flood lights, subject to EPA and weight limits.