30 Foot Wood Pole | Class 4 | Treated | Ponderosa Pine

Product Overview

This 30 Foot Wood Pole, Class 4, is manufactured from Ponderosa Pine and treated with CCA preservative. It is designed for direct burial installation in outdoor environments where structural support for lighting and utility distribution is required. Typical use includes sports field lighting and utility distribution for municipal or rural sites, with a height above grade of 25 feet and a buried depth of 5 feet.

The pole meets ANSI O5.1 and AWPA standards for dimensional and treatment requirements. Weight ranges from 430 to 505 lbs, with minimum top and butt circumferences specified for consistent structural performance. This pole is suitable for supporting area and sports lighting fixtures in field and parking lot environments.

Core Performance and Output

This Class 4 wood pole is engineered for moderate structural loads, supporting typical sports field and area lighting fixtures at mounting heights up to 25 feet above grade. The pole?s minimum top outside diameter of 6.7 inches and 10.3 inches at 6 feet from the butt provide stable fixture mounting and wind load resistance within the limits of Class 4 specifications.

CCA treatment protects against decay, termites, and rot, supporting long-term outdoor use. The pole?s EPA and weight capacity are suitable for single or double lighting assemblies commonly used on recreational fields and parking areas. Excessive fixture weight or high EPA arrays may require higher class or larger diameter poles for structural safety.

Adjustability and Control Options

This wood pole provides a fixed mounting height of 25 feet above grade. Fixture mounting options depend on bracket selection and field requirements. The pole can accommodate standard crossarms, tenons, or direct-mount hardware for area and sports lighting fixtures.

No integrated control or wiring features are included; all conduit, wiring, and controls must be field-installed according to project requirements and local codes. The pole?s form factor allows for flexible placement of lighting and utility hardware as needed.

Longevity and Reliability

Pressure treatment with CCA extends the service life of the Ponderosa Pine pole by protecting against biological degradation. Compliance with AWPA standards ensures consistent preservative penetration and retention. The pole is designed for long-term outdoor exposure in a range of climates.

Routine inspection for surface checking, hardware corrosion, and ground line decay is recommended as part of ongoing maintenance. Actual service life will vary based on soil conditions, installation quality, and environmental exposure.

Build Quality and Physical Characteristics

This pole is manufactured from solid Ponderosa Pine, debarked and shaped to meet ANSI O5.1 Class 4 dimensional standards. Minimum circumference and outside diameter are specified for both the top and 6 feet from the butt, supporting consistent structural performance.

CCA treatment is applied by pressure process to meet AWPA requirements. The pole is supplied for direct burial, with a 5-foot embedment depth standard for 30-foot total length. Weight and dimensions may vary within specified tolerances due to natural wood variability.

Where This Product Fits Best

This 30 Foot Class 4 wood pole is suited for outdoor environments requiring moderate-height structural support for lighting or utility distribution. It is commonly installed in sports fields, recreational areas, and municipal or rural sites where direct burial wood poles are standard practice.

• sports field lighting
• baseball field lighting
• football field lighting
• soccer field lighting
• recreational field lighting
• area lighting
• municipal lighting
• utility distribution

CCA treatment and solid wood construction allow for installation in a range of soil types and climates. The pole is not intended for high-wind coastal zones or locations requiring higher structural classes without additional engineering review.

Installation and Long-Term Use

Direct burial installation requires excavation to a minimum depth of 5 feet, with backfill and compaction per standard utility practices. The pole?s weight and length require mechanical handling and proper rigging for safe placement. All mounting hardware and lighting assemblies must be installed according to manufacturer and code requirements.

Long-term use depends on soil drainage, ground line protection, and periodic inspection for decay or mechanical damage. Hardware and fixture loads must remain within Class 4 structural limits. Replacement cycles are typically driven by ground line decay or changes in lighting requirements.

How This Fixture Is Commonly Used

Poles of this type are typically spaced to provide uniform lighting coverage for sports fields or large recreational areas, with fixture mounting heights at 25 feet above grade. Spacing and layout depend on field size, fixture wattage, and required light levels. Multiple poles may be used per field, with crossarms or brackets supporting one or more luminaires per pole.

Tradeoff: Increasing pole height or fixture count can improve uniformity but may require higher class poles or additional structural review for wind loading and fixture weight.

Safety, Certifications, and Warranty

This pole is manufactured to ANSI O5.1 and AWPA standards. CCA treatment meets current American Wood Preservers Association requirements for decay and termite resistance. All dimensional and treatment specifications are verified at the time of manufacture.

The product includes a 1-year warranty covering material and workmanship. Safety during installation requires adherence to standard utility pole handling and burial practices, including proper PPE and equipment use.

Frequently Asked Questions

Q: What is the maximum fixture weight this pole can support?

A: Fixture weight and EPA limits are determined by Class 4 structural ratings and must be verified against project wind load and mounting requirements. Consult structural tables for Class 4 wood poles at 30 feet.

Q: Can this pole be used for both lighting and utility distribution?

A: Yes, this pole is suitable for supporting lighting fixtures and utility distribution hardware within Class 4 load limits.

Q: What is the recommended burial depth for installation?

A: The standard burial depth for this 30 foot pole is 5 feet below grade, resulting in 25 feet above grade height.

Q: How often should the pole be inspected after installation?

A: Annual inspection is recommended to check for ground line decay, hardware corrosion, and mechanical damage.

Q: How should I plan pole spacing for sports field lighting?

A: Pole spacing depends on field size, fixture output, and required light levels. Typical layouts use multiple poles per field, spaced to achieve uniform coverage and minimize shadows.

Application Questions and Clarification

Q: Is this pole suitable for coastal or high-wind environments?

A: This Class 4 pole is not intended for high-wind or coastal zones without additional engineering review. Higher class or alternative materials may be required for those conditions.

Q: Can this pole be used for parking lot lighting?

A: Yes, this pole can support parking lot lighting fixtures within Class 4 structural limits and is commonly used in municipal and area lighting applications.

Q: What type of fixtures can be mounted on this pole?

A: Area lights, flood lights, and sports field luminaires compatible with wood pole mounting hardware can be installed, provided total load does not exceed Class 4 ratings.

Q: Does the pole include pre-drilled holes or mounting hardware?

A: No, mounting holes and hardware are field-supplied and installed based on fixture and bracket requirements.