Need help choosing the right Product?
Get expert recommendations and a custom lighting plan within 1 day! Get Product Recommendations ➜
30 Foot Above Grade Round Tapered Fiberglass Pole | 8.5 Inches Base Diameter | Direct Burial | 3 EPA at 100 MPH
Product Description
Key Features
- Total Height: 35 Feet
- Height Above Grade: 30 Feet
- Buried Depth Below Grade: 5 Feet
- Material: Fiberglass
- Pole Weight: 112 lbs
- Pole Diameter: 8.5 Inch Base | 5.3 in Tip
- Pole Finish: Acrylic Enamel
- Pole Color: Bronze | Custom
- Pole Installation: Direct Burial
- Warranty: 15 years
- EPA at 70 mph: 12
- EPA at 80 mph: 10
- EPA at 90 mph: 6
- EPA at 100 mph: 3
Disclaimer: LED Lighting Supply is not responsible for improper loading of light fixtures or other attachments, improper use, or foundation design of light poles. We act solely as a supplier of lighting solutions, including metal halide replacement fixtures and parking lot light poles. Final pole assembly and installation are the responsibility of the purchaser.
Dimensions and specifications for round or square composite light poles are subject to change without notice. Please refer to the current data sheet for the most up-to-date specifications. Custom sizing is available only for large-quantity orders. Pole caps may be used in place of other mounting options when required.
Composite light poles are covered by a 15-year workmanship warranty, which warrants that the poles are free from manufacturing defects-including weld and structural integrity issues-at the time of shipment. Any pole found to be defective, upon examination, during normal use and service within 15 years from the date of shipment will be repaired or replaced at our discretion. This warranty does not cover damage resulting from external factors, misuse, or normal wear and tear.
Web ID: 2336
Product Overview
This 30-foot above grade round tapered fiberglass pole is designed for direct burial installation with a total length of 35 feet, including 5 feet of buried depth below grade. The pole tapers from an 8.5-inch base diameter to a 5.3-inch tip diameter and weighs 112 pounds.
The fiberglass construction provides a non-conductive, corrosion-resistant alternative to steel or aluminum poles. The pole is finished with acrylic enamel and is available in bronze or custom color options.
Where This Product Fits Best
This pole is suited for applications requiring a 30-foot mounting height where direct burial installation is preferred over anchor base methods. The fiberglass material makes it appropriate for sites where electrical conductivity is a concern or where soil and environmental conditions would accelerate corrosion on metal poles.
With an EPA rating of 3 at 100 mph, fixture and arm selection must account for wind load limitations. Sites with higher wind exposure or larger fixture arrays may require poles with greater EPA capacity.
Performance and Functional Considerations
The EPA ratings define the maximum effective projected area of mounted fixtures and arms the pole can support at various wind speeds. At 70 mph, the pole supports up to 12 EPA. At 80 mph, it supports 10 EPA. At 90 mph, it supports 6 EPA. At 100 mph, the rating drops to 3 EPA.
Fixture and mounting arm combinations must be calculated against the EPA rating that corresponds to the maximum expected wind speed at the installation site. Exceeding the EPA limit for the applicable wind speed compromises structural integrity.
Installation and Long-Term Use
This pole installs by direct burial with 5 feet set below grade. No anchor base, anchor bolts, or concrete base plate assembly is required. The burial depth is fixed and must be maintained to achieve rated structural performance.
At 112 pounds, the pole is lighter than comparable steel or aluminum poles of similar height, which can reduce equipment requirements during installation. The acrylic enamel finish is factory-applied and does not require field painting under normal conditions.
How This Fixture Is Commonly Used
Fiberglass poles at this height are often used in parking areas, pathways, and perimeter lighting where moderate mounting heights are needed and metal poles are not preferred. The non-conductive property of fiberglass is relevant in locations near electrical infrastructure or in environments where grounding considerations affect material selection.
The tapered profile and factory finish allow the pole to be installed without additional preparation. Fixture mounting at the tip end uses standard pole-top or arm-mount configurations compatible with the 5.3-inch tip diameter.
Safety, Certifications, and Warranty
This pole is covered by a 15-year warranty.
The fiberglass construction is non-conductive and resistant to corrosion from moisture, salt, and chemical exposure typical of outdoor environments.
Frequently Asked Questions
What is the total length of this pole?
The total length is 35 feet. When installed with the required 5-foot burial depth, 30 feet remains above grade.
What is the tip diameter for fixture mounting?
The tip diameter is 5.3 inches.
What EPA can this pole support at 100 mph wind speed?
The pole supports a maximum of 3 EPA at 100 mph.
What colors are available?
The pole is available in bronze or custom color with an acrylic enamel finish.
What is the warranty period?
This pole includes a 15-year warranty.
Application Questions and Clarification
This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.
