25 Foot Wood Pole | Class 4 | Treated | Southern Yellow Pine

Product Overview

This 25 foot Class 4 wood pole is manufactured from Southern Yellow Pine and treated with CCA for long-term durability. Designed for direct burial, it meets ANSI O5.1 standards for utility and lighting pole applications. Typical use includes mounting area lighting, flood lights, or security cameras in outdoor environments where wood poles are preferred for their non-conductive properties and ease of installation.

With a total length of 25 feet and a height above grade of 20.5 feet after burial, this pole is suitable for sports field lighting, rural roadway lighting, and utility distribution. The Class 4 rating provides a balance of strength and manageable weight for common field installations.

Core Performance and Output

This pole supports typical lighting and utility loads for its class and height. The Class 4 rating and Southern Yellow Pine construction provide structural capacity for mounting multiple fixtures, including area lights, flood lights, and security equipment. Minimum pole top circumference and diameter ensure compatibility with standard mounting hardware and brackets.

Direct burial installation at 4.5 feet below grade provides stability for wind loads encountered in open field or roadside environments. Excessive fixture weight or high EPA (Effective Projected Area) loads may require higher class poles or additional engineering review. Performance is consistent with standard 25 foot wood utility pole deployments.

Adjustability and Control Options

This wood pole does not include integrated adjustability or control features. Fixture mounting locations and orientations are determined by field-drilled holes or bracket selection. Height above grade is fixed by burial depth.

Lighting controls, sensors, or remote monitoring equipment can be mounted as required, but are not included with the pole. All adjustments are made during installation or by modifying attached equipment.

Longevity and Reliability

Southern Yellow Pine is selected for its strength and availability. CCA treatment protects against decay, rot, and insect damage, extending service life in outdoor environments. Compliance with American Wood Preservers Association standards ensures consistent treatment quality.

Routine inspection is recommended to monitor for mechanical damage, surface checking, or ground line decay over time. Expected service life is typical for treated wood poles in utility and lighting applications, with environmental conditions and maintenance practices affecting longevity.

Build Quality and Physical Characteristics

This pole is grown, debarked, and treated in the United States. It weighs between 510 and 600 lbs, with a minimum top circumference of 21 inches and a minimum diameter of 6.7 inches. The butt section provides a minimum circumference of 27.5 inches and a diameter of 8.8 inches at 6 feet from the base.

CCA treatment is applied to meet current standards for outdoor utility structures. The pole is designed for direct burial installation, eliminating the need for anchor bolts or base plates. All dimensions and tolerances are consistent with ANSI O5.1 requirements for Class 4 wood poles.

Where This Product Fits Best

This 25 foot Class 4 wood pole is suited for outdoor environments where non-conductive, treated wood structures are preferred. It is commonly used for mounting lighting and utility equipment in sports, municipal, and rural settings.

• baseball field lighting
• sports field lighting
• utility distribution
• rural roadway lighting
• area lighting
• parking lot lighting
• municipal lighting
• agricultural property lighting

CCA treatment and direct burial design allow installation in a range of soil types and climates. The pole is not recommended for coastal or highly corrosive environments without additional protection.

Installation and Long-Term Use

Direct burial installation requires excavation to a depth of 4.5 feet, with backfill and compaction for stability. Standard pole setting practices apply, including alignment, tamping, and guying if required by load or site conditions. The pole accommodates standard crossarms, brackets, and lighting hardware.

Long-term use involves periodic inspection for decay at the ground line, mechanical damage, or fixture overloading. Replacement or reinforcement may be needed if structural integrity is compromised. CCA treatment reduces maintenance frequency compared to untreated wood.

How This Fixture Is Commonly Used

Typical mounting height above grade is 20.5 feet, supporting lighting fixtures for sports fields, parking lots, or rural roadways. Fixture spacing and layout depend on light level requirements, fixture wattage, and site geometry. Poles are often spaced to provide uniform coverage for fields or large outdoor areas.

Higher mounting heights reduce the number of poles needed but may require higher output fixtures or increased pole class for wind load. Tradeoff exists between fixture count, light uniformity, and structural requirements.

Safety, Certifications, and Warranty

This pole is manufactured to ANSI O5.1 standards and treated to American Wood Preservers Association specifications. CCA treatment provides resistance to decay and insect damage. The product includes a 1-year warranty covering material and manufacturing defects.

Standard safety practices for wood pole handling, installation, and climbing apply. Non-conductive properties reduce electrical hazard compared to metal poles in certain applications.

Frequently Asked Questions

Q: What is the maximum fixture weight this pole can support?

A: Fixture weight and EPA limits depend on mounting height, wind exposure, and bracket configuration. For typical lighting and utility loads at 20.5 feet above grade, Class 4 poles support standard area lights, flood lights, or cameras. Heavier or high-EPA fixtures may require engineering review.

Q: Is this pole suitable for coastal or marine environments?

A: This pole is CCA treated for decay resistance but is not specifically rated for marine or highly corrosive environments. Additional protection or alternative materials may be required for coastal installations.

Q: What is the recommended burial depth for installation?

A: The pole is designed for direct burial with 4.5 feet below grade, resulting in 20.5 feet above grade height.

Q: Can this pole be used for both lighting and utility distribution?

A: Yes, this pole is suitable for mounting lighting fixtures, utility lines, or combination equipment within its structural capacity and class rating.

Q: How should poles be spaced for sports field lighting?

A: Spacing depends on field size, fixture wattage, and light level requirements. Typical layouts use 4 to 8 poles per field, with spacing adjusted for uniform coverage and minimal glare.

Application Questions and Clarification

Q: Is this pole appropriate for parking lot lighting in rural areas?

A: Yes, this pole is commonly used for parking lot lighting in rural and municipal settings where wood poles are preferred.

Q: Can this pole be used for agricultural property lighting?

A: This pole is suitable for agricultural property lighting, including area and security lighting around barns, equipment yards, or driveways.

Q: What sports field types are supported by this pole?

A: This pole is used for baseball field lighting, sports field lighting, and recreational field lighting within its height and class limits.

Q: Is this pole compatible with standard lighting brackets and crossarms?

A: Yes, the pole dimensions and top diameter are compatible with standard lighting brackets, crossarms, and mounting hardware for utility and lighting applications.