Need help choosing the right Product?
Get expert recommendations and a custom lighting plan within 1 day! Get Product Recommendations ➜
You may also like...
-
25 Foot Square Fiberglass Light Pole | 5 Inches Wide | Anchor Base
Minimum Order: 4Minimum Order Total: $5,107.28Built to Order 5 WeeksRetail Price: $1,276.82 -
25 Foot Above Grade | 30 Foot Total Height Round Fiberglass Light Pole | 6 Inch Diameter | Direct Burial | High Wind Zone Rated
Minimum Order: 4Minimum Order Total: $7,220.68Built to Order 8 WeeksRetail Price: $1,805.17
25 Foot Round Fiberglass Light Pole | 6 Inch Diameter | Anchor Base | High Wind Zone Rated
This 25-foot fiberglass pole is a strong choice for mounting area lights or equipment in environments where corrosion resistance and non-conductivity are important, such as coastal sites, chemical facilities, or electrically sensitive areas. Its acrylic enamel finish and color options support long-term appearance and site integration, while the anchor base design allows secure installation on concrete foundations. The pole’s EPA ratings up to 160 mph make it suitable for locations with high wind exposure, provided fixture area limits are observed. Routine inspection of mounting hardware is recommended.
Dwayne Kula | President, CTO and Founder
Product Description
Key Features
- Total Height (ft): 25
- Material: Fiberglass
- Pole Weight (lbs): 104
- Pole Diameter (in): 6
- Pole Bolt Circle (in): 8
- Pole Finish: Acrylic Enamel
- Pole Color: Bronze | Black | White | Gray | Custom
- Bolt Projection (in): 2.75
- Pole Installation: Anchor Base
- Warranty: 15 years
- EPA at 70 mph: 12
- EPA at 110 mph: 7.5
- EPA at 130 mph: 5.5
- EPA at 160 mph: 3
Disclaimer: LED Lighting Supply is not responsible for improper loading of light fixtures or other attachments, improper use, or foundation design of light poles. We act solely as a supplier of lighting solutions, including metal halide replacement fixtures and parking lot light poles. Final pole assembly and installation are the responsibility of the purchaser.
Dimensions and specifications for round or square composite light poles are subject to change without notice. Please refer to the current data sheet for the most up-to-date specifications. Custom sizing is available only for large-quantity orders. Pole caps may be used in place of other mounting options when required.
Composite light poles are covered by a 15-year workmanship warranty, which warrants that the poles are free from manufacturing defects-including weld and structural integrity issues-at the time of shipment. Any pole found to be defective, upon examination, during normal use and service within 15 years from the date of shipment will be repaired or replaced at our discretion. This warranty does not cover damage resulting from external factors, misuse, or normal wear and tear.
Web ID: 2343
Product Overview
This 25 Foot Round Fiberglass Light Pole is designed for outdoor lighting installations requiring corrosion resistance and high wind zone performance. The pole stands 25 feet tall with a 6-inch diameter and weighs 104 pounds. It features an anchor base mounting system and an acrylic enamel finish, available in bronze, black, white, gray, or custom colors. The pole is engineered for environments with wind speeds up to 160 mph, with EPA ratings of 12 at 70 mph, 7.5 at 110 mph, 5.5 at 130 mph, and 3 at 160 mph. The 15-year warranty covers structural integrity and finish.
The fiberglass construction provides a non-conductive, low-maintenance solution for demanding outdoor sites. This pole is suitable for applications where steel or aluminum poles may be subject to corrosion or require additional maintenance. The anchor base design supports straightforward installation on prepared concrete foundations.
Where This Product Fits Best
This pole is specified for outdoor lighting in environments where corrosion resistance, non-conductivity, and high wind ratings are required. Typical installations include sports fields, coastal areas, marinas, and utility sites exposed to harsh weather or corrosive conditions.
- baseball field lighting
- football field lighting
- sports field lighting
- driving range lighting
- coastal lighting
- corrosive environment lighting
- marina lighting
- wastewater facility lighting
The fiberglass material resists salt, moisture, and chemicals, making it suitable for coastal, marine, and wastewater environments. The pole?s wind load ratings support use in hurricane-prone or high-wind regions. Color options allow for visual integration with site requirements.
Performance and Functional Considerations
This pole supports a maximum EPA of 12 at 70 mph, decreasing at higher wind speeds. The 6-inch diameter and 104-pound weight provide a balance of strength and manageable handling during installation. The acrylic enamel finish protects against UV exposure and surface degradation.
Fiberglass construction eliminates concerns about rust, galvanic corrosion, or electrical conductivity. The anchor base design allows for secure attachment to concrete foundations using a standard bolt circle. The pole is compatible with a range of luminaire mounting brackets and tenons.
Color selection can be matched to site requirements or branding. The pole?s height and wind rating support mounting of multiple fixtures or larger luminaires, subject to EPA limits. Maintenance requirements are minimal compared to steel or aluminum alternatives.
Installation and Long-Term Use
Installation requires a prepared concrete base with anchor bolts set to an 8-inch bolt circle and 2.75-inch bolt projection. The pole is delivered ready for mounting, with finish and color applied at the factory. Handling is simplified by the lower weight compared to steel poles of similar height.
Long-term use in corrosive or coastal environments is supported by the fiberglass material and acrylic enamel finish. Periodic inspection is recommended to confirm structural integrity and finish condition, especially in high-exposure locations. The pole is non-conductive, reducing electrical hazard risk during maintenance.
Fixture mounting hardware should be selected to match the pole?s diameter and EPA limits. The pole is suitable for both new construction and replacement projects where corrosion or wind load is a concern.
How This Fixture Is Commonly Used
This fiberglass pole is commonly installed for outdoor sports field lighting, including baseball and football fields, where tall mounting heights and wind resistance are required. It is also used in driving ranges and sports complexes exposed to weather and corrosive elements.
Coastal lighting and marina lighting applications benefit from the pole?s resistance to salt and moisture. Wastewater facility lighting and corrosive environment lighting are supported by the non-metallic construction. The pole is also specified for utility and area lighting in environments where steel poles are not suitable due to corrosion risk.
Color options allow for integration with site aesthetics or compliance with local requirements. The pole?s anchor base simplifies replacement of existing poles on prepared foundations.
Safety, Certifications, and Warranty
This pole is engineered for high wind zones and is rated for EPA at 70 mph, 110 mph, 130 mph, and 160 mph. The fiberglass construction is non-conductive and corrosion resistant. The acrylic enamel finish provides UV and weather protection.
The product includes a 15-year warranty covering structural performance and finish. All manufacturing and material standards are met for outdoor lighting pole applications. The pole is suitable for use in environments requiring non-metallic, corrosion-resistant solutions.
Installation and maintenance should follow standard safety practices for pole handling and foundation preparation. The pole?s non-conductive properties reduce electrical hazard risk during service.
Frequently Asked Questions
Q: What is the maximum EPA this pole can support at different wind speeds?
A: The maximum EPA is 12 at 70 mph, 7.5 at 110 mph, 5.5 at 130 mph, and 3 at 160 mph.
Q: What type of foundation is required for anchor base installation?
A: A concrete foundation with an 8-inch bolt circle and 2.75-inch bolt projection is required.
Q: Is this pole suitable for coastal or corrosive environments?
A: Yes, the fiberglass construction and acrylic enamel finish are designed for use in coastal and corrosive environments.
Q: What color options are available?
A: Standard colors are bronze, black, white, and gray. Custom colors are available on request.
Q: What is the warranty period for this pole?
A: The warranty period is 15 years.
Application Questions and Clarification
Q: Can this pole be used for sports field lighting in high wind zones?
A: Yes, the pole is rated for high wind zones and is commonly used for sports field lighting, including baseball and football fields.
Q: Is this pole appropriate for marina or coastal lighting projects?
A: Yes, the fiberglass material and finish are suitable for marina and coastal lighting applications.
Q: Can this pole be installed at wastewater facilities or other corrosive sites?
A: Yes, it is designed for use in corrosive environments such as wastewater facilities.
Q: What is the recommended fixture mounting method for this pole?
A: Fixtures should be mounted using hardware compatible with a 6-inch diameter pole and within the EPA limits for the site?s wind speed.
