25 Foot Above Grade Round Fiberglass Light Pole | 6 Inch Diameter | Direct Burial | High Wind Zone Rated

Product Overview

This 25-foot above grade round fiberglass light pole is designed for direct burial installation with a total length of 30 feet, including a 5-foot buried section below grade. The pole tapers from a 6-inch base diameter to a 5.3-inch tip diameter and weighs 90 pounds.

The fiberglass construction provides corrosion resistance without the weight of steel or aluminum alternatives. An acrylic enamel finish is applied to the exterior, with bronze as the standard color option and custom colors available.

This pole carries EPA ratings across multiple wind speed thresholds: 12 EPA at 70 mph, 7.5 EPA at 110 mph, 5.5 EPA at 130 mph, and 3 EPA at 160 mph. These ratings define the maximum effective projected area of fixtures and attachments the pole can support at each wind speed.

Where This Product Fits Best

This pole is suited for area lighting applications where fixtures such as post top luminaires or shoebox-style fixtures are mounted at a 25-foot height. The direct burial installation method eliminates the need for anchor bolts and base plates, which simplifies foundation requirements in locations where concrete anchor bases are impractical or unnecessary.

The 160 mph wind rating with 3 EPA capacity makes this pole appropriate for high wind zone installations where local codes require structural components rated for extreme weather conditions. Coastal regions, hurricane-prone areas, and exposed sites with sustained high winds are typical candidates for poles rated at this level.

Performance and Functional Considerations

EPA ratings determine how much fixture surface area the pole can safely carry at a given wind speed. At 160 mph, this pole supports fixtures with a combined EPA of 3 or less. At lower wind speeds, higher EPA values are allowed: 5.5 EPA at 130 mph, 7.5 EPA at 110 mph, and 12 EPA at 70 mph.

When selecting fixtures, the EPA value of each luminaire must be verified against the wind speed requirement for the installation site. Exceeding the EPA limit at the applicable wind speed compromises structural integrity and voids design assumptions.

The fiberglass material does not corrode and maintains structural properties without galvanizing or protective coatings over the pole body. The acrylic enamel finish provides exterior protection and color consistency.

Installation and Long-Term Use

Direct burial installation requires excavating to a minimum depth of 5 feet to accommodate the below-grade section. The pole is set into the excavation and backfilled according to site-specific soil conditions and local code requirements. Foundation design and final pole assembly are the responsibility of the installer.

At 90 pounds, the pole is lighter than comparable steel or aluminum poles of similar height, which can reduce equipment requirements during placement. However, proper rigging and handling procedures still apply to prevent damage to the fiberglass structure and finish.

Fixture loading, attachment hardware, and foundation engineering must be verified by the installer or project engineer. LED Lighting Supply does not provide foundation design or assume responsibility for improper loading of fixtures or attachments.

How This Fixture Is Commonly Used

Facilities typically use this pole to support area lighting in parking lots, walkways, perimeter security zones, and other outdoor spaces where a 25-foot mounting height is appropriate. Post top fixtures and shoebox-style luminaires are the most common attachments.

Installers select the pole based on two factors: the required mounting height and the EPA capacity at the applicable local wind speed. For sites in high wind zones, verifying that the fixture EPA falls within the 3 EPA limit at 160 mph is critical before finalizing the specification.

Once installed, the pole requires no routine maintenance beyond periodic inspection of the fixture attachments and wiring access points. The fiberglass material does not require repainting or corrosion treatment under normal conditions.

Safety, Certifications, and Warranty

This pole is covered by a 15-year workmanship warranty. The warranty covers defects from the manufacturing process, including welds and structural integrity, for the stated period from the date of purchase. The warranty does not cover damage resulting from external factors, misuse, or normal wear and tear.

Dimensions and specifications are subject to change without notice. Current pole data should be verified against the manufacturer data sheet before finalizing any specification. Custom sizing is available for large order quantities only. Pole caps are used in place of other mounting options when necessary.

Frequently Asked Questions

What is the total pole length?
The total length is 30 feet, with 25 feet above grade and 5 feet below grade for direct burial.

What wind speeds is this pole rated for?
The pole is rated for wind speeds up to 160 mph with an EPA capacity of 3 at that speed. Higher EPA capacities are available at lower wind speeds: 5.5 EPA at 130 mph, 7.5 EPA at 110 mph, and 12 EPA at 70 mph.

What colors are available?
Bronze is the standard color. Custom colors are available.

What is the warranty coverage?
The pole carries a 15-year workmanship warranty covering manufacturing defects. External damage, misuse, and normal wear are not covered.

What installation method does this pole use?
This pole is designed for direct burial installation with a 5-foot below-grade depth.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.