20 Foot Square Fiberglass Light Pole | 4 Inches Wide | Anchor Base | High Wind Zone Rated

Product Overview

This is a 20-foot square fiberglass light pole with a 4-inch width and anchor base. The pole is constructed from non-conductive fiberglass and finished with a fluoropolymer coating for long-term durability. The total weight is 52 pounds, and the pole gauge is .205 inches.

The anchor base design uses a 9 1/16 inch by 9 1/16 inch base plate and a 7-inch bolt circle. A top cap is included. Color options are bronze, black, white, gray, or custom. The pole is rated for high wind zones and conforms to AASHTO and ANSI specifications.

This pole is inert, non-toxic, non-leaching, and environmentally safe. It does not rot, rust, or corrode and is designed to bend under load and return to its original form. The pole does not sustain a flame and is coated in UV-protective paint.

Anchor bolts, base covers, and tenons are not included and must be selected separately if required for installation.

Where This Product Fits Best

This fiberglass light pole is suited for outdoor environments where corrosion, rust, or electrical conductivity are concerns. It is appropriate for high wind zones, as shown by its EPA ratings at various wind speeds.

Common applications include parking lots, walkways, perimeter lighting, and areas exposed to harsh weather or corrosive conditions. The non-conductive material is suitable for locations where electrical isolation is required.

Facilities with requirements for non-leaching, non-toxic, and environmentally inert materials will find this pole compatible with those needs. The fire-resistant properties support use in areas with elevated fire safety requirements.

Color selection allows for integration with site aesthetics or compliance with local design standards.

Performance and Functional Considerations

The pole is rated for effective projected area (EPA) loads at wind speeds from 70 mph to 130 mph. At 70 mph, the EPA is 15, decreasing to 1.4 at 130 mph. This allows for selection based on fixture size and wind exposure at the installation site.

The fiberglass construction provides strength in both compression and tension, supporting durability in demanding conditions. The pole is designed to flex under wind load and return to its original shape, reducing the risk of catastrophic failure.

The fluoropolymer coating and UV-protective paint extend service life by resisting degradation from sunlight and weather. The pole does not rot, rust, or corrode, minimizing maintenance requirements in outdoor or coastal environments.

The non-conductive and fire-resistant properties support use in locations with electrical safety or fire risk considerations.

Installation and Long-Term Use

This pole uses an anchor base installation method. The base plate measures 9 1/16 inches square with a 7-inch bolt circle. Anchor bolts, base covers, and tenons are not included and must be selected based on site requirements.

The lightweight design at 52 pounds simplifies handling, unloading, and positioning during installation. The included top cap provides a finished appearance and protects the pole interior.

Once installed, the pole requires minimal maintenance due to its resistance to rot, rust, and corrosion. The UV-protective coating maintains appearance and structural integrity over time.

The pole is designed to bend under wind load and return to its original form, reducing the likelihood of permanent deformation or breakage in severe weather.

How This Fixture Is Commonly Used

After installation, this fiberglass light pole is typically used to support area lighting fixtures in outdoor environments. The non-conductive material is relied on in locations where electrical isolation is important, such as near pedestrian walkways or in areas with overhead power lines.

The pole's ability to flex and return to shape is valued in high wind zones, where rigid poles may be at risk of failure. Maintenance teams interact with the pole primarily for fixture servicing, as the pole itself does not require routine upkeep for corrosion or finish degradation.

The color options allow for matching to site requirements or visual standards. The included top cap keeps debris and moisture out of the pole interior after installation.

Facilities with environmental or fire safety requirements use this pole where non-leaching, non-toxic, and fire-resistant materials are specified.

Safety, Certifications, and Warranty

This pole conforms to AASHTO and ANSI specifications.

The product is non-conductive and fire-resistant. It is inert, non-toxic, and non-leaching.

The pole is coated in a fluoropolymer finish with UV protection.

LED Lighting Supply provides a 7-year warranty on this pole.

Frequently Asked Questions

What is the total height of the pole?
The pole is 20 feet tall.

What material is the pole made from?
The pole is constructed from fiberglass.

What mounting method does this pole use?
This pole uses an anchor base installation with a 9 1/16 inch by 9 1/16 inch base plate and a 7-inch bolt circle.

What environmental conditions can this pole tolerate?
The pole is rated for high wind zones with EPA ratings from 70 mph to 130 mph. It does not rot, rust, or corrode and is fire-resistant.

What warranty is provided?
LED Lighting Supply provides a 7-year warranty on this pole.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.