7 / 10 / 13 Wattage Adjustable 4 Inch LED Downlight | 600 to 1050 Lumens | 2700K / 3000K / 3500K / 4000K / 5000K Adjustable | 100-277V

Product Overview

This 4-inch LED downlight delivers 600 to 1,050 lumens across three selectable wattage settings: 7, 10, or 13 watts. A toggle switch on the fixture allows color temperature selection between 2700K, 3000K, 3500K, 4000K, or 5000K. The fixture replaces 50-watt metal halide sources and operates on 100-277V input.

The low-profile design features smooth white trim and an aluminum alloy housing with a polycarbonate lens. A 120-degree beam angle distributes light broadly across the space. The fixture is wet location rated and carries a CRI of 90+, supporting accurate color rendering in occupied spaces.

Installation uses either the included TP24 or E26 connector, with spring clips securing the fixture into the ceiling opening. The fixture dimensions are 5 3/8 inches in diameter by 3 1/16 inches in height, with a weight of 1 pound.

Where This Product Fits Best

This downlight fits 4-inch recessed ceiling openings in commercial and light industrial spaces where adjustable output and color temperature are needed to match existing fixtures or meet tenant requirements. The wet location rating allows installation in covered outdoor areas, restrooms, and spaces with elevated humidity.

The 100-277V operating range accommodates both standard commercial 120V circuits and higher-voltage distribution systems common in larger facilities. The 50,000-hour rated lifespan at L70 reduces replacement frequency in high-ceiling or hard-to-access installations.

The selectable wattage and color temperature options make this fixture practical in multi-tenant buildings or phased retrofit projects where lighting consistency matters but exact requirements vary by space.

Performance and Functional Considerations

Lumen output scales with wattage selection: 600 lumens at 7 watts, 850 lumens at 10 watts, and 1,050 lumens at 13 watts. Efficacy is rated at 86 lumens per watt across all settings. The 0-10V dimming protocol provides compatibility with common commercial dimming controls.

The 120-degree beam angle produces wide light distribution suited to general ambient lighting rather than focused task or accent applications. The polycarbonate lens provides diffusion while the aluminum alloy housing supports heat dissipation.

Operating temperature range spans -4°F to 113°F, covering standard conditioned interiors and most unconditioned spaces in temperate climates. The 0.95 power factor supports efficient operation on commercial electrical systems.

Installation and Long-Term Use

The fixture installs into existing 4-inch recessed housings using spring clips that compress during insertion and expand behind the ceiling plane. Connection options include the TP24 connector for direct wire applications or the E26 adapter for screw-base retrofit into existing lamp holders. Both connectors are included.

Wattage and color temperature selections are made via toggle switches on the fixture body prior to final installation. These settings remain fixed once the fixture is mounted and powered. The 1-pound weight and compact profile simplify handling during installation.

The wet location rating and aluminum construction support long-term use in demanding environments without housing degradation. The 50,000-hour L70 lifespan means the fixture will maintain at least 70% of initial output for the duration of its rated life under normal operating conditions.

How This Fixture Is Commonly Used

Once installed, this fixture operates as a fixed-output downlight at the selected wattage and color temperature. Day-to-day operation requires no adjustment unless connected to a 0-10V dimming system, in which case output responds to the connected control signal.

Facility teams typically select wattage and color temperature during initial installation based on adjacent fixtures or space requirements. In retrofit scenarios, matching the 3000K or 3500K settings to existing fixtures maintains visual consistency. Cooler temperatures like 4000K or 5000K are often selected for task-intensive areas.

The fixture requires no maintenance access under normal operation. If replacement becomes necessary, spring clip retention allows removal by pulling straight down from the ceiling plane.

Safety, Certifications, and Warranty

This fixture is ETL listed. The wet location rating permits installation in areas exposed to moisture or humidity where direct water contact does not occur. The aluminum alloy housing and polycarbonate lens meet durability expectations for commercial recessed applications.

We provide a 5-year warranty on this fixture.

Frequently Asked Questions

What voltage does this fixture require?
The fixture operates on 100-277V input, covering standard commercial voltage ranges without requiring a separate driver or transformer.

Can this fixture be dimmed?
Yes. The fixture supports 0-10V dimming when connected to a compatible dimming control system.

Is this fixture rated for wet locations?
Yes. The fixture carries a wet location rating and can be installed in covered outdoor areas or interior spaces with elevated humidity.

What does this fixture replace?
This LED downlight replaces 50-watt metal halide sources in 4-inch recessed applications.

What is the warranty coverage?
This fixture is covered by a 5-year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.