22 | 26 | 30 | 35 | 40 Watt Adjustable 10 Inch LED Downlight | 2640 to 4800 Lumens | 2700K / 3000K / 3500K / 4000K / 5000K Adjustable | 100-277V

Product Overview

This adjustable 10-inch LED downlight is a recessed commercial fixture with selectable wattage and color temperature settings. It provides broad 120-degree distribution for general ceiling illumination and controlled light levels within finished interior spaces.

The fixture operates from 100-277V and uses a white aluminum alloy housing with a polycarbonate lens. Its wet location rating supports recessed installations where moisture exposure is present.

Core Performance and Output

Selectable wattage settings of 22W, 26W, 30W, 35W, and 40W produce 2640, 3120, 3600, 4200, and 4800 lumens. Fixture efficacy is 120 lumens per watt, with 90+ CRI and selectable 2700K, 3000K, 3500K, 4000K, and 5000K color temperatures.

The standard 120-degree beam angle provides wide ceiling-level distribution. Higher output settings can be excessive where lower ceiling mounting positions or lower light levels are required.

The fixture has a 0.95 power factor and accepts 100-277V input. The 0-10V dimming capability allows output adjustment through a compatible control system.

Adjustability and Control Options

Wattage selection allows the fixture output to be set from 2640 to 4800 lumens. This supports adjustment where ceiling layouts or target light levels differ within the same project.

Color temperature is selectable from 2700K through 5000K. The selected setting should be established before final commissioning so fixture appearance remains consistent across the installation.

0-10V dimming is available. Controls must be compatible with the fixture’s 0-10V dimming system.

Longevity and Reliability

The LED system is rated for 50,000 L70 hours. This rating identifies the point at which light output is expected to remain at 70 percent of initial output.

The fixture operates in ambient temperatures from -4F to 113F. Long-term performance depends on maintaining suitable conditions within the recessed ceiling location.

Build Quality and Physical Characteristics

The fixture uses an aluminum alloy housing and polycarbonate lens. The white finish is intended for recessed ceiling appearance.

Fixture dimensions are 11 5/16 inches in diameter by 4 15/16 inches high. Weight is 1.5 pounds.

Recessed mounting places the fixture within the ceiling plane. The ceiling opening and available cavity depth must accommodate the fixture dimensions.

Where This Product Fits Best

This downlight fits finished commercial interiors requiring recessed general lighting with adjustable output and color temperature. It is suited to locations where a broad beam pattern and clean ceiling integration are required.

• commercial recessed lighting
• office lighting
• hospitality lighting
• retail lighting
• lobby lighting
• corridor lighting

The wet location rating supports moisture-exposed recessed locations. The fixture is ETL listed.

Installation and Long-Term Use

Installation requires a recessed ceiling opening and sufficient cavity depth for the 4 15/16-inch fixture height. Confirm the selected wattage and color temperature settings before closing the ceiling installation.

The fixture operates on 100-277V input and uses recessed mounting. For dimmed installations, route and connect the 0-10V control conductors according to the control layout.

Maintenance access should account for the recessed location and ceiling construction. The 1.5-pound fixture weight reduces handling load during installation and service.

How This Fixture Is Commonly Used

In commercial recessed lighting, office lighting, hospitality lighting, and retail lighting, fixtures are set into the finished ceiling plane in repeated rows or coordinated ceiling patterns. Lobby lighting and corridor lighting layouts commonly follow the ceiling geometry and required light distribution.

Mounting height is established by the finished ceiling height because the fixture is recessed. Spacing and layout vary with the selected wattage, color temperature, target light level, and ceiling arrangement.

Higher wattage settings can reduce the number of fixtures required in a layout, but they can also produce more light than needed in lower ceiling areas. The 120-degree beam angle should be considered when coordinating fixture locations.

Safety, Certifications, and Warranty

This fixture is ETL listed and wet location rated.

The operating temperature range is -4F to 113F. The fixture includes a 5-year warranty.

Frequently Asked Questions

Q: What wattage and lumen settings are available?

A: The fixture is selectable at 22W, 26W, 30W, 35W, and 40W. Corresponding output levels are 2640, 3120, 3600, 4200, and 4800 lumens.

Q: Can the color temperature be adjusted?

A: Yes. Available color temperature settings are 2700K, 3000K, 3500K, 4000K, and 5000K.

Q: Does this downlight support dimming?

A: Yes. The fixture supports 0-10V dimming.

Q: What should be considered when planning fixture placement for corridor lighting?

A: Finished ceiling height, selected wattage, target light levels, and the 120-degree beam angle affect the layout. A specific spacing value is not established by the supplied product data.

Application Questions and Clarification

Q: Is this fixture appropriate for lobby lighting and corridor lighting?

A: Lobby lighting and corridor lighting are valid applications for this recessed downlight. Final layout depends on the selected output setting and project light level requirements.

Q: What should be confirmed before recessed installation?

A: Confirm the 11 5/16-inch diameter, 4 15/16-inch fixture height, recessed mounting location, available ceiling cavity depth, input voltage, and selected wattage and color temperature settings.

Q: Can this fixture be used in wet location recessed installations?

A: Yes. The fixture is wet location rated.

Web ID: 1913