14 / 18 / 22 / 26 / 30 Watt Adjustable 8 Inch LED Downlight | 1279 to 2622 Lumens | 2700K / 3000K / 3500K / 4000K / 5000K Adjustable | 100-277V

Product Overview

This 8 inch LED downlight is a recessed commercial fixture with adjustable wattage and color temperature settings. It operates from 100-277V and provides five output settings from 1279 to 2622 lumens.

The fixture is intended for commercial recessed lighting where a single downlight configuration needs to accommodate different output and color temperature requirements. Its 120 degree distribution and white trim suit general ceiling layouts in office lighting, corridor lighting, retail lighting, and hospitality lighting.

Core Performance and Output

Wattage adjusts between 14W, 18W, 22W, 26W, and 30W. Corresponding output ranges from 1279 to 2622 lumens at 88 lumens per watt.

The 120 degree beam angle provides broad downward distribution through a polycarbonate lens. The 90+ CRI supports color rendering in commercial interior spaces.

Color temperature adjusts between 2700K, 3000K, 3500K, 4000K, and 5000K. Higher output settings can be excessive where ceilings are low or where existing fixture spacing is close.

Adjustability and Control Options

Field-selectable wattage allows the fixture output to be set from 14W through 30W. This supports consistent fixture appearance where different areas require different light levels.

The color-selectable switch provides five CCT settings from warm 2700K through cool 5000K. The fixture also supports 0-10V dimming.

Voltage operation is 100-277V. Power factor is 0.95.

Longevity and Reliability

The LED system is rated for 50,000 hours at L70. This rating identifies the point at which light output is expected to reach 70 percent of initial output.

The operating temperature range is -4F to 113F. Long-term operation depends on maintaining suitable ceiling conditions and electrical connections.

The fixture includes a 5-year warranty.

Build Quality and Physical Characteristics

The housing is aluminum alloy with a white finish. The lens is polycarbonate and the fixture is wet location rated.

The downlight measures 10 1/4 inches in diameter by 4 7/16 inches high. Fixture weight is 1.5 pounds.

Recessed mounting keeps the fixture body above the finished ceiling plane. Ceiling opening, plenum clearance, and accessible wiring conditions should be confirmed before installation.

Where This Product Fits Best

This downlight fits commercial recessed lighting layouts requiring broad general illumination, adjustable output, and selectable color temperature. The wet location rating supports installations where moisture exposure is present.

• commercial recessed lighting
• office lighting and corridor lighting
• retail lighting and hospitality lighting
• lobby lighting and restaurant lighting
• accent lighting

The recessed form factor is intended for finished ceiling systems. The 120 degree beam distribution is suited to general ceiling coverage rather than narrow directional lighting.

Installation and Long-Term Use

The fixture installs recessed in the ceiling and operates on 100-277V input. Set wattage and color temperature before final commissioning so fixture settings remain consistent across the layout.

Verify the ceiling opening, fixture depth, wiring access, and dimming requirements before installation. The fixture is wet location rated, but installation conditions must remain within the listed -4F to 113F operating range.

For long-term service, maintain access to electrical connections and confirm the selected output remains appropriate if ceiling use or interior layout changes.

How This Fixture Is Commonly Used

In office lighting and commercial recessed lighting layouts, fixtures are distributed across the ceiling to provide broad general illumination. Mounting height is determined by the finished ceiling design and recessed installation conditions.

Corridor lighting commonly follows a continuous ceiling layout, while lobby lighting, retail lighting, hospitality lighting, and restaurant lighting use fixture placement around the intended illuminated areas. Accent lighting requires placement that aligns with the feature being illuminated.

Spacing and output selection vary with mounting height, target light levels, and layout requirements. Higher wattage settings can reduce fixture count, but may produce more light than needed in low ceiling layouts.

Safety, Certifications, and Warranty

This fixture is ETL listed. It is wet location rated.

The fixture operates from 100-277V and supports 0-10V dimming. Installation must account for the selected voltage and control wiring.

The warranty period is 5 years.

Frequently Asked Questions

Q: What wattage settings are available?

A: The fixture has selectable 14W, 18W, 22W, 26W, and 30W settings.

Q: What color temperature settings are available?

A: The fixture has selectable 2700K, 3000K, 3500K, 4000K, and 5000K settings.

Q: Does this downlight support dimming?

A: Yes. The fixture supports 0-10V dimming.

Q: Is this fixture suitable for corridor lighting?

A: Corridor lighting is a listed secondary application. The fixture has recessed mounting and a 120 degree beam angle.

Application Questions and Clarification

Q: What should be confirmed when planning a commercial recessed lighting layout?

A: Confirm the ceiling opening, recessed fixture depth, mounting height, target light levels, and layout requirements. Specific spacing values are not established by the supplied product data.

Q: Can the same fixture setting be used across office lighting and lobby lighting?

A: The fixture provides adjustable wattage and five selectable color temperatures. Final settings depend on the required light level and color appearance for each area.

Q: What environmental condition is established for this downlight?

A: The fixture is wet location rated and has an operating temperature range of -4F to 113F.

Web ID: 1576