10 / 15 / 22 Watt Adjustable 6 Inch LED Downlight | 900 to 1850 Lumens | 2700K / 3000K / 3500K / 4000K / 5000K Adjustable | 100-277V

Product Overview

This 6-inch LED downlight is designed for commercial recessed lighting applications where adjustable output and color temperature are required. The fixture supports selectable wattages of 10, 15, or 22 watts, delivering 900 to 1850 lumens. It is suitable for use in offices, retail spaces, hospitality environments, and corridors. The fixture is wet location rated and operates on 100-277V, making it compatible with a wide range of commercial electrical systems.

Color temperature can be set to 2700K, 3000K, 3500K, 4000K, or 5000K during installation. This allows for consistent visual appearance across different areas or for matching existing lighting. The fixture is intended for recessed mounting in standard ceiling openings and is commonly used as a replacement for 50W or 70W metal halide downlights.

Core Performance and Output

This downlight provides three selectable output levels: 900 lumens at 10W, 1300 lumens at 15W, and 1850 lumens at 22W. Efficacy exceeds 84 lumens per watt. The fixture produces a 120° beam angle for wide, even coverage in open ceiling layouts. High CRI (90+) supports accurate color rendering in commercial and hospitality settings.

0-10V dimming is standard, allowing for integration with compatible dimming controls. Output at 22W may be excessive for low ceiling heights or small rooms; select lower wattage settings as needed to avoid over-lighting. Uniformity may decrease if fixtures are spaced too far apart in high-ceiling corridors or large open areas.

Adjustability and Control Options

Wattage and color temperature are field-selectable via onboard switches, enabling adjustment during installation or future reconfiguration. This supports changes in space use or lighting requirements without fixture replacement. The fixture supports 0-10V dimming for integration with building lighting controls.

Color temperature can be set to any of five values from warm (2700K) to daylight (5000K), supporting a range of visual environments. No additional accessories are required for adjustability. Dimming performance depends on compatibility with the installed control system.

Longevity and Reliability

The fixture is rated for 50,000 hours (L70) at typical operating conditions. The polycarbonate lens and aluminum alloy housing provide durability in commercial environments. Wet location rating supports installation in areas subject to occasional moisture, such as lobbies or covered exterior corridors.

Operating temperature range is -4°F to 113°F. The fixture is designed for long-term use with minimal maintenance. Power factor is 0.95, supporting efficient operation on commercial circuits.

Build Quality and Physical Characteristics

The housing is constructed from aluminum alloy for strength and heat dissipation. The lens is polycarbonate for impact resistance and optical clarity. Fixture color is white to match standard ceiling finishes. The unit weighs 1.21 lbs and measures 8 1/4 inches in diameter by 4 inches in height.

Recessed mounting is standard. The fixture is ETL listed and wet location rated. All components are designed for commercial use and repeated maintenance cycles.

Where This Product Fits Best

This downlight is intended for commercial interiors requiring recessed ceiling lighting with adjustable output and color temperature. It is suitable for both new construction and retrofit projects where flexibility and wet location rating are required.

• commercial recessed lighting
• office lighting
• retail lighting
• hospitality lighting
• corridor lighting
• lobby lighting
• restaurant lighting
• accent lighting

Wet location rating allows use in areas exposed to occasional moisture. The fixture is not intended for exterior open-air installation or high-abuse environments. Color and output adjustability support use across multiple space types within a facility.

Installation and Long-Term Use

The fixture is designed for recessed mounting in standard 6-inch ceiling openings. Installation requires access to the ceiling plenum and connection to 100-277V supply. Field-selectable switches for wattage and color temperature are accessible during installation.

Long-term maintenance is limited to periodic cleaning of the lens and inspection of electrical connections. The fixture is compatible with 0-10V dimming systems. Wet location rating supports use in covered entryways, restrooms, and similar environments.

How This Fixture Is Commonly Used

Typical mounting height is 8 to 12 feet, depending on ceiling design and required light levels. Fixtures are spaced to achieve uniform coverage, with closer spacing in corridors or areas requiring higher illumination. Output setting is selected based on ceiling height and application needs.

In open offices or retail spaces, fixtures are often installed in grid layouts. In corridors, linear spacing is common. Higher output settings reduce fixture count but may increase glare if used in low ceilings. Adjustability allows for tuning after installation to match space requirements.

Safety, Certifications, and Warranty

This fixture is ETL listed and wet location rated. It operates within a temperature range of -4°F to 113°F. The product includes a 5-year warranty covering manufacturing defects and performance.

All components are rated for commercial use. The fixture meets safety and performance standards for use in commercial interiors and covered exterior locations.

Frequently Asked Questions

Q: What is the maximum mounting height for effective illumination?

A: Typical mounting height is 8 to 12 feet. At higher ceilings, use the 22W setting for increased output.

Q: Can the color temperature be changed after installation?

A: Yes, color temperature is field-selectable via onboard switches accessible during maintenance.

Q: Is this fixture compatible with all 0-10V dimming systems?

A: The fixture supports standard 0-10V dimming. Verify compatibility with the installed control system for best performance.

Q: What is the recommended spacing for corridor lighting?

A: Spacing typically ranges from 6 to 10 feet, depending on output setting and required light levels.

Application Questions and Clarification

Q: Is this downlight suitable for use in restaurant dining areas?

A: Yes, the fixture is commonly used in restaurant lighting and supports adjustable color temperature for ambiance control.

Q: Can this fixture be installed in wet location corridors or covered entryways?

A: Yes, the fixture is wet location rated and suitable for covered areas exposed to occasional moisture.

Q: Is this product intended for exterior open-air installation?

A: No, it is designed for interior or covered locations and is not intended for direct exposure to weather.

Q: Does the fixture support retrofit installation in existing 6-inch ceiling cutouts?

A: Yes, the fixture is designed for recessed mounting in standard 6-inch ceiling openings, supporting both new and retrofit installations.