45 Watt Solar Area Light | 8550 Lumens | 5000K | 3 Year Warranty

Product Overview

This 45 watt solar area light delivers 8550 lumens at 5000K with a CRI above 80. The fixture operates at 190 lumens per watt and serves as a replacement for 250 watt metal halide systems in outdoor area lighting applications.

The housing is galvanized steel with a gray finish. Total fixture dimensions are 33.9 x 16.2 x 4.2 inches, and the unit weighs 33 lbs. A slip fitter mount is standard for pole installation.

This fixture includes an integrated motion sensor and photocell. The EPA rating is 2.86, which determines wind load calculations for pole sizing.

Where This Product Fits Best

This solar area light is intended for outdoor pole-mounted applications where grid power is unavailable, impractical, or cost-prohibitive to extend. Parking lots, pathways, perimeter lighting, and remote equipment yards are typical installation sites.

The 8550 lumen output and Type 3 beam distribution suit applications requiring forward-throw coverage along roadways or rectangular areas. The 250 watt metal halide replacement class positions this fixture for sites upgrading legacy HID infrastructure to solar LED.

IP65 rating allows installation in locations exposed to rain, dust, and general outdoor weather. The galvanized steel housing resists corrosion in exterior environments.

Performance and Functional Considerations

The fixture produces 8550 lumens from 45 watts, achieving 190 lumens per watt. Color temperature is 5000K, a neutral daylight appearance common in area and security lighting. CRI is above 80.

Type 3 beam distribution directs light forward and to the sides, concentrating output along the length of a roadway, walkway, or parking aisle rather than in a circular pattern. This distribution reduces light spillage to adjacent properties.

The EPA rating of 2.86 must be factored into pole selection. Higher EPA values increase wind load on the mounting structure, and this figure should be provided to structural engineers or pole suppliers during project planning.

Installation and Long-Term Use

The slip fitter mount accepts standard round poles. At 33 lbs total weight, the fixture requires appropriate pole capacity and may require two installers for safe handling during mounting.

The integrated photocell enables automatic dusk-to-dawn operation. The motion sensor provides occupancy-based response. Both features are built into the fixture.

Galvanized steel construction and IP65 ingress protection allow the fixture to remain installed in outdoor conditions without supplemental weatherproofing. The fixture resists water jets and dust accumulation under normal exterior exposure.

How This Fixture Is Commonly Used

Once installed, this fixture operates autonomously using solar charging during daylight hours and stored battery power after dark. The photocell activates the light at dusk and deactivates it at dawn without manual intervention.

The motion sensor adjusts output based on detected activity in the coverage area. This extends battery reserves during periods of low traffic while providing full output when the area is occupied.

Maintenance access is straightforward given the slip fitter mount, which allows the fixture head to be repositioned or removed from the pole without disassembly of the mounting arm. Periodic inspection of the solar panel surface for debris or obstruction supports consistent charging performance.

Safety, Certifications, and Warranty

This fixture carries IP65 ingress protection. The galvanized steel housing provides structural durability for long-term outdoor installation.

LED Lighting Supply provides a 3 year warranty on this product.

Frequently Asked Questions

What does this fixture replace?
This solar area light replaces 250 watt metal halide fixtures in outdoor pole-mounted applications.

What is the color temperature?
The fixture produces 5000K light, a neutral daylight appearance.

What is the beam distribution?
Type 3 distribution directs light forward and laterally, suited for roadway and aisle lighting patterns.

What mounting method does this fixture use?
The fixture includes a slip fitter mount for installation on round poles.

What is the IP rating?
IP65. The fixture is protected against dust ingress and water jets from any direction.

What is the warranty?
LED Lighting Supply provides a 3 year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.