80 Watt LED Wall Pack | 12174 Lumens | 3000K / 4000K / 5000K Adjustable | 100-277V | Emergency Battery Backup

Product Overview

This 80 Watt LED Wall Pack is designed for exterior wall mounting on commercial and industrial buildings. It delivers 12,174 lumens with selectable color temperatures of 3000K, 4000K, or 5000K. The fixture is intended for applications requiring reliable perimeter, security, or entry lighting, and is suitable for replacing 250W metal halide wall packs. Typical mounting heights range from 8 to 18 feet on building exteriors, storage facilities, and service areas.

The fixture includes an integrated emergency battery backup for egress compliance and uninterrupted illumination during power loss. The IP65 rating and die-cast aluminum housing support use in outdoor environments exposed to rain, dust, and temperature fluctuations.

Core Performance and Output

This wall pack outputs 12,174 lumens at 80 watts, providing an efficacy of 152 lumens per watt. The 120° beam angle delivers wide, uniform coverage suitable for exterior wall lighting and perimeter illumination. Color temperature can be set to 3000K, 4000K, or 5000K to match site requirements or existing lighting.

1-10V dimming is standard for integration with compatible controls. The fixture operates on 100-277V input and maintains a power factor above 0.90 with THD below 20%. At mounting heights below 8 feet, output may be excessive and increase glare. At heights above 18 feet, uniformity and ground-level illumination may decrease.

Adjustability and Control Options

The fixture features field-selectable color temperature, allowing adjustment between 3000K, 4000K, and 5000K during installation or maintenance. This supports adaptation to site-specific visual requirements or changes in exterior lighting standards.

1-10V dimming is built in for use with compatible dimming systems. The emergency battery backup provides automatic illumination during power outages, supporting egress and safety requirements. No motion sensor or photocell is integrated; external controls can be added if needed.

Longevity and Reliability

The fixture is rated for 50,000 hours (L70), supporting long-term operation with minimal maintenance. The die-cast aluminum housing and polycarbonate lens are designed for durability in outdoor environments, resisting impact and weather exposure.

IP65 ingress protection prevents dust and water intrusion. The fixture operates reliably in ambient temperatures from -40°F to 122°F. Emergency battery backup is integrated for code compliance and safety during power loss events.

Build Quality and Physical Characteristics

The housing is constructed from die-cast aluminum with a bronze finish. The polycarbonate lens provides impact resistance and uniform light distribution. The fixture measures 14.2 inches long, 9.5 inches wide, and 7.6 inches high, with a total weight of 7.9 lbs.

Wall mounting is standard. The fixture is UL listed and IP65 rated for outdoor use. All hardware and components are designed for commercial exterior environments, including frequent exposure to rain, dust, and temperature swings.

Where This Product Fits Best

This wall pack is intended for exterior wall mounting on commercial and industrial buildings where reliable, uniform illumination is required for safety, security, and site visibility. It is suitable for use on building facades, perimeter walls, and service areas. The fixture is commonly installed at entry points, loading areas, and along walkways or alleys where consistent lighting is needed for personnel and vehicle movement.

• security lighting
• building facade lighting
• commercial exterior wall lighting
• building exterior lighting
• perimeter lighting
• entry lighting
• service area lighting
• loading area lighting

The fixture is suitable for wet locations and environments with exposure to rain, dust, and temperature extremes. It is not intended for hazardous, marine, or high-abuse environments.

Installation and Long-Term Use

This wall pack is designed for direct wall mounting using standard hardware. The fixture supports surface mounting to masonry, concrete, or structural exterior walls. Electrical connections are made via 100-277V input wiring. Color temperature selection is set during installation and can be adjusted as needed.

Emergency battery backup is pre-installed and requires no additional wiring beyond standard AC and control connections. Routine maintenance is limited to periodic cleaning of the lens and inspection of seals. The fixture is designed for minimal service requirements over its rated life.

How This Fixture Is Commonly Used

Typical mounting heights range from 8 to 18 feet, depending on the area to be illuminated and site security requirements. Fixtures are spaced to provide overlapping coverage along building exteriors, with spacing determined by mounting height and desired light levels. For perimeter and entry lighting, fixtures are often installed near access points and along walkways.

Higher output allows for wider spacing and reduced fixture count, but may increase glare if mounted too low or aimed directly at pedestrian areas. Emergency battery backup ensures continued operation during power loss, supporting egress and safety compliance.

Safety, Certifications, and Warranty

This fixture is UL listed and IP65 rated. It meets requirements for wet location installation and is eligible for utility rebates where applicable. The fixture includes a 5-year warranty covering manufacturing defects and performance.

Emergency battery backup is integrated for code compliance. All components are rated for commercial exterior use and meet relevant safety standards.

Frequently Asked Questions

Q: What is the recommended mounting height for this wall pack?

A: Typical mounting heights range from 8 to 18 feet for optimal coverage and uniformity.

Q: Can the color temperature be changed after installation?

A: Yes, the color temperature can be field-adjusted between 3000K, 4000K, and 5000K as needed.

Q: Is the emergency battery backup included or optional?

A: The emergency battery backup is integrated and included with the fixture.

Q: Does this fixture support dimming controls?

A: Yes, 1-10V dimming is standard for use with compatible dimming systems.

Q: What is the expected lifespan of the fixture?

A: The fixture is rated for 50,000 hours (L70) under normal operating conditions.

Q: How should fixtures be spaced for perimeter lighting?

A: Spacing depends on mounting height and required light levels; typical spacing is 2 to 3 times the mounting height for uniform coverage.

Application Questions and Clarification

Q: Is this wall pack suitable for use in loading area lighting?

A: Yes, it is commonly used for loading area lighting on commercial and industrial building exteriors.

Q: Can this fixture be used for multifamily exterior lighting?

A: Yes, it is suitable for multifamily exterior lighting where wall-mounted illumination is required.

Q: Is this fixture appropriate for use in alley lighting?

A: Yes, it is frequently specified for alley lighting along building exteriors.

Q: Is this wall pack designed for hazardous or marine environments?

A: No, this fixture is not rated for hazardous or marine environments; it is intended for standard commercial exterior use.