60 Watt LED Wall Pack | 7928 Lumens | 5000K | 100-277V | Built-In Photocell

Product Overview

This 60 Watt LED Wall Pack is designed for exterior wall mounting on commercial and industrial buildings. It delivers 7928 lumens at 5000K, providing a daylight-white output suitable for perimeter and security lighting. The fixture includes a built-in photocell for dusk-to-dawn operation and is housed in a die-cast aluminum body with a polycarbonate lens. Typical installations include building exteriors, service areas, and loading zones where reliable, uniform illumination is required. This model is a direct replacement for 200W metal halide wall packs and is commonly installed at mounting heights between 8 and 15 feet.

The fixture is UL listed and IP65 rated for wet locations. It operates on 100-277V, supporting a wide range of commercial electrical systems. The compact form factor and integrated photocell streamline installation and reduce maintenance requirements.

Core Performance and Output

This wall pack outputs 7928 lumens at 60 watts, achieving an efficacy of 132 lumens per watt. The 120° beam angle provides wide, uniform coverage along building perimeters and entry points. The 5000K color temperature delivers high-visibility, neutral white light suitable for security and exterior applications. Power factor is greater than 0.90, and total harmonic distortion is less than 20%.

At mounting heights above 15 feet, light levels may decrease and uniformity may be reduced. For low mounting heights below 8 feet, output may be excessive for pedestrian areas or residential-adjacent installations. This fixture is not dimmable and is intended for general exterior illumination rather than accent or decorative use.

Adjustability and Control Options

The fixture includes a built-in photocell for automatic dusk-to-dawn operation. No manual dimming or advanced control options are provided. The photocell is factory-installed and cannot be bypassed without field modification.

Beam distribution is fixed at 120°. There are no field-adjustable optics or aiming features. The fixture is designed for standard wall mounting with the lens facing outward and downward.

Longevity and Reliability

This wall pack is rated for 50,000 hours of L70 life. The LED driver and light engine are thermally managed within a die-cast aluminum housing to maintain consistent performance over time. The polycarbonate lens resists impact and UV degradation.

Operating temperature range is -40°F to 122°F. The fixture is suitable for year-round exterior use in most climates. The integrated design minimizes points of failure and reduces maintenance intervals compared to legacy HID wall packs.

Build Quality and Physical Characteristics

The housing is constructed from die-cast aluminum with a bronze powder coat finish. The lens is polycarbonate for impact resistance. The fixture measures 13.1 inches long, 9.5 inches wide, and 7.5 inches high, with a total weight of 8 pounds.

Ingress protection is rated at IP65, supporting installation in wet locations and exposure to rain or washdown. All hardware and gasketing are designed for exterior durability. The fixture color is bronze, matching standard commercial exterior palettes.

Where This Product Fits Best

This wall pack is intended for exterior wall mounting on commercial and industrial buildings. It is suitable for applications requiring reliable perimeter, security, and entry lighting. The output and coverage are appropriate for small to medium building exteriors, service areas, and loading zones.

• security lighting
• building facade lighting
• building exterior lighting
• commercial exterior wall lighting
• perimeter lighting
• entry lighting
• service area lighting
• loading area lighting

Environmental characteristics include IP65 wet location rating, -40°F to 122°F operating range, and resistance to impact and UV exposure. The fixture is not intended for hazardous, marine, or decorative architectural applications.

Installation and Long-Term Use

The fixture is designed for direct wall mounting using standard hardware. Electrical connection is made via 100-277V input, compatible with most commercial building circuits. The integrated photocell automates dusk-to-dawn operation, reducing manual intervention.

Routine maintenance is limited to periodic cleaning of the lens and inspection of mounting hardware. The sealed housing and polycarbonate lens minimize ingress of dust and moisture. No lamp or ballast replacements are required during the rated life.

For retrofit projects, this fixture can replace 200W metal halide wall packs without significant changes to mounting or wiring. Ensure the mounting surface is structurally sound and that the fixture is installed at a height appropriate for the desired coverage.

How This Fixture Is Commonly Used

Typical mounting heights range from 8 to 15 feet above grade, providing uniform coverage along building perimeters and entry points. Fixtures are often spaced 20 to 30 feet apart, depending on required light levels and site geometry. For loading areas and service entrances, closer spacing may be used to increase illumination.

In security and perimeter applications, the built-in photocell ensures the fixture operates only during nighttime hours. Higher output reduces the number of fixtures needed for continuous coverage but may increase glare if installed at low mounting heights or near residential boundaries.

Safety, Certifications, and Warranty

This fixture is UL listed and IP65 rated. It is suitable for wet locations and meets standard safety requirements for exterior commercial lighting. The product is eligible for utility rebates where applicable.

The fixture includes a 5-year warranty covering manufacturing defects and performance. All components are rated for commercial use and long-term reliability in outdoor environments.

Frequently Asked Questions

Q: What is the recommended mounting height for this wall pack?

A: Recommended mounting height is 8 to 15 feet for optimal coverage and uniformity.

Q: Can this fixture be installed in wet locations?

A: Yes, the fixture is IP65 rated and suitable for wet locations.

Q: Is the photocell removable or bypassable?

A: The photocell is built-in and not designed for field removal or bypass.

Q: Does this wall pack support dimming or advanced controls?

A: No, this model does not support dimming or advanced control options.

Q: How many fixtures are needed for continuous perimeter lighting?

A: Spacing typically ranges from 20 to 30 feet between fixtures, depending on site requirements and desired light levels.

Application Questions and Clarification

Q: Is this wall pack suitable for loading area lighting?

A: Yes, it is commonly used for loading area lighting on commercial building exteriors.

Q: Can this fixture be used for multifamily exterior lighting?

A: Yes, it is suitable for multifamily exterior lighting when installed at appropriate mounting heights.

Q: Is this fixture appropriate for alley lighting?

A: Yes, this wall pack is frequently specified for alley lighting and similar exterior pathways.

Q: Is this product designed for hazardous or marine environments?

A: No, this fixture is not rated for hazardous or marine environments.