50 Watt LED Wall Pack | 7719 Lumens | 3000K / 4000K / 5000K Adjustable | 100-277V | Emergency Battery Backup

Product Overview

This 50 Watt LED Wall Pack is designed for exterior wall mounting on commercial and industrial buildings. It delivers 7719 lumens with selectable color temperatures of 3000K, 4000K, or 5000K. The fixture is intended for use in environments where reliable perimeter, security, and entry lighting are required. Typical installations include building exteriors, service areas, and loading zones, often as a direct replacement for 150 Watt metal halide wall packs.

The fixture operates on 100-277V and includes an emergency battery backup for egress compliance. The compact form factor and IP65 rating support use in exposed outdoor locations subject to rain, dust, and temperature swings.

Core Performance and Output

This wall pack outputs 7719 lumens at 50 watts, providing an efficacy of 154 lumens per watt. The 120° beam angle delivers wide, uniform coverage suitable for wall-mounted perimeter and security lighting. Color temperature can be set to 3000K, 4000K, or 5000K to match site requirements or existing lighting.

1-10V dimming is standard, allowing for integration with lighting controls or occupancy sensors. At lower mounting heights, output may be excessive for small entryways or narrow walkways. Uniformity may decrease if fixtures are spaced too far apart on large building facades.

Adjustability and Control Options

The fixture includes a field-selectable color temperature switch, enabling adjustment between 3000K, 4000K, and 5000K during installation or maintenance. 1-10V dimming is built in for use with compatible dimming systems or controls.

An integrated emergency battery backup provides illumination during power loss, supporting code compliance for egress and safety lighting. No motion sensor is included as standard; external controls can be added if required.

Longevity and Reliability

The LED system is rated for 50,000 hours (L70), supporting long-term operation with minimal maintenance. The die-cast aluminum housing and polycarbonate lens are designed for durability in outdoor environments.

IP65 ingress protection prevents water and dust intrusion. The fixture operates reliably in temperatures from -40°F to 122°F. Emergency battery backup is included for critical applications where power interruptions are a concern.

Build Quality and Physical Characteristics

The housing is constructed from die-cast aluminum with a bronze finish. The lens is polycarbonate for impact resistance and optical clarity. The fixture measures 10.4 x 9.5 x 7.5 inches and weighs 7.9 lbs.

Wall mounting is standard. The fixture is UL listed and suitable for wet locations. All hardware is designed for outdoor exposure and long-term reliability.

Where This Product Fits Best

This wall pack is intended for exterior wall mounting on commercial and industrial buildings. It is suitable for applications requiring reliable perimeter, security, and entry lighting, as well as service and loading area illumination. The fixture is commonly used on building facades and exterior walls where uniform, wide-area coverage is needed.

• security lighting
• building facade lighting
• building exterior lighting
• commercial exterior wall lighting
• perimeter lighting
• entry lighting
• service area lighting
• loading area lighting

The fixture is IP65 rated for wet locations and operates in a wide temperature range. It is suitable for exposed outdoor environments, including areas subject to rain, dust, and temperature extremes.

Installation and Long-Term Use

This wall pack is designed for direct wall mounting using standard hardware. The compact size allows for installation on a range of exterior wall types, including masonry and metal panels. The fixture supports 100-277V input and includes an emergency battery backup for egress requirements.

Routine maintenance is limited to periodic cleaning of the lens and inspection of the emergency battery. The color temperature switch is accessible for field adjustment. All components are designed for long service life in outdoor conditions.

How This Fixture Is Commonly Used

Typical mounting height ranges from 8 to 15 feet, depending on the area to be illuminated and the desired light levels. Fixtures are often spaced 15 to 30 feet apart along building facades or perimeter walls to achieve uniform coverage.

In security and entry lighting applications, closer spacing may be used to minimize shadows and improve visibility. Higher output allows for wider spacing but may increase glare if mounted too low or used in confined areas.

Safety, Certifications, and Warranty

This fixture is UL listed and IP65 rated for wet locations. It meets requirements for outdoor commercial lighting and is eligible for utility rebates where applicable. The emergency battery backup supports egress and safety compliance.

The product is covered by a 5-year warranty. All components are designed for safe operation in commercial and industrial environments.

Frequently Asked Questions

Q: What is the recommended mounting height for this wall pack?

A: Typical mounting height is 8 to 15 feet, depending on the area and required light levels.

Q: Can the color temperature be changed after installation?

A: Yes, the color temperature switch is accessible for adjustment during installation or maintenance.

Q: Is this fixture suitable for use in wet outdoor locations?

A: Yes, it is IP65 rated and designed for wet location use.

Q: Does the fixture include an emergency battery backup?

A: Yes, an emergency battery backup is integrated for egress lighting requirements.

Q: How should fixtures be spaced for uniform coverage?

A: Spacing typically ranges from 15 to 30 feet, depending on mounting height and site requirements.

Application Questions and Clarification

Q: Is this wall pack appropriate for perimeter lighting on commercial buildings?

A: Yes, it is commonly used for perimeter lighting on commercial and industrial building exteriors.

Q: Can this fixture be used for entryway or service area lighting?

A: Yes, it is suitable for entry lighting and service area illumination where reliable coverage is needed.

Q: Is the fixture compatible with lighting controls or sensors?

A: The fixture supports 1-10V dimming and can be integrated with compatible controls or sensors.

Q: What environments are not suitable for this wall pack?

A: It is not intended for hazardous, marine, or high-temperature environments.