48 Watt LED Semi Cutoff LED Wall Pack | 6240 Lumens | 5000K | 100-277V

Product Overview

This 48 Watt LED Semi Cutoff Wall Pack is designed for exterior wall mounting where reliable perimeter and security lighting is required. The fixture delivers 6240 lumens at 5000K, providing clear, neutral-white illumination suitable for building exteriors and service areas. The semi cutoff design offers forward-throw distribution while minimizing uplight, making it appropriate for applications where light trespass control is needed.

Commonly installed as a 150W metal halide replacement, this wall pack is used on commercial and industrial buildings, multifamily properties, and service areas. The compact form factor and vandal-resistant construction support use in locations exposed to weather and potential impact.

Core Performance and Output

This fixture outputs 6240 lumens at 48 watts, achieving 130 lumens per watt. The 5000K color temperature provides a daylight-white appearance for exterior visibility and security. The 120x90° beam angle delivers wide, even coverage along building perimeters and entry points.

Performance is optimized for mounting heights between 8 and 15 feet. At lower mounting heights, output may be excessive for small entryways or residential-scale applications. Uniformity may decrease if spacing exceeds typical wall pack intervals or if mounted above recommended heights.

Adjustability and Control Options

This wall pack operates on 100-277V input and is non-dimmable. The fixture does not include integrated photocell or motion sensor options. Control is typically managed by external switching or building automation systems.

The semi cutoff optical design directs light forward and downward, reducing glare and minimizing uplight. No field-adjustable optics or aiming features are included.

Longevity and Reliability

The fixture is rated for 50,000 hours (L70), supporting long-term operation with minimal maintenance. The LED driver and light engine are designed for consistent output and color stability over the service life.

Operating temperature range is -40°F to 113°F, suitable for most North American climates. The IP65 rating protects against dust and water ingress, supporting use in exposed exterior locations.

Build Quality and Physical Characteristics

The housing is die-cast aluminum with a bronze finish, providing impact resistance and corrosion protection. The polycarbonate lens is vandal-resistant and designed to withstand incidental contact or tampering.

Fixture dimensions are 7.72 x 5.83 x 6.54 inches, with a total weight of 4 lbs. The compact size supports installation in areas with limited wall space or architectural constraints.

Where This Product Fits Best

This wall pack is intended for exterior wall mounting on commercial, industrial, and multifamily buildings. It is suitable for locations requiring reliable perimeter, entry, and service area lighting with moderate output and vandal resistance.

• security lighting
• building facade lighting
• building exterior lighting
• commercial exterior wall lighting
• perimeter lighting
• entry lighting
• service area lighting
• multifamily exterior lighting

Environments include parking lot perimeters, loading areas, building entrances, and exterior corridors. The fixture is suitable for wet locations and areas exposed to weather or incidental impact.

Installation and Long-Term Use

This fixture is designed for direct wall mounting using standard hardware. The compact housing allows installation on masonry, concrete, or metal surfaces. Electrical connection is made via internal wiring compartment with access from the rear or side.

Routine maintenance is limited to periodic cleaning of the lens and inspection of mounting hardware. No lamp or ballast replacement is required. The fixture is not intended for ceiling or pole mounting.

How This Fixture Is Commonly Used

Typical mounting heights range from 8 to 15 feet, depending on the area to be illuminated and required light levels. Fixtures are spaced to provide overlapping coverage along building perimeters, entryways, and service areas.

In perimeter lighting applications, spacing and mounting height should be coordinated to avoid dark spots and excessive overlap. Higher output reduces fixture count but may increase glare if installed at low heights or in confined areas.

Safety, Certifications, and Warranty

This fixture is ETL certified and IP65 rated. It is suitable for wet locations and meets requirements for exterior commercial lighting. The product is rebate eligible where applicable.

A 5-year warranty covers defects in materials and workmanship under normal operating conditions.

Frequently Asked Questions

Q: What is the recommended mounting height for this wall pack?

A: Recommended mounting height is 8 to 15 feet for optimal coverage and uniformity.

Q: Does this fixture support dimming or motion sensors?

A: This model is non-dimmable and does not include integrated motion sensors or photocells.

Q: Is the fixture suitable for use in wet or exposed outdoor locations?

A: Yes, the IP65 rating supports installation in wet locations and exposed exterior environments.

Q: What type of lens material is used?

A: The fixture uses a vandal-resistant polycarbonate lens.

Q: How many fixtures are needed for continuous perimeter lighting?

A: Fixture spacing depends on mounting height and required light levels; typical intervals are 20 to 30 feet for uniform coverage.

Application Questions and Clarification

Q: Can this wall pack be used for entry lighting on multifamily buildings?

A: Yes, this fixture is commonly used for entry lighting and multifamily exterior lighting.

Q: Is this fixture appropriate for loading area lighting?

A: The output and distribution are suitable for loading area lighting when mounted at recommended heights.

Q: Does the fixture provide adequate coverage for service area lighting?

A: The 120x90° beam angle and 6240 lumen output support service area lighting along building exteriors.

Q: Is this wall pack designed for vandal resistance?

A: The die-cast aluminum housing and polycarbonate lens provide resistance to impact and tampering.