40 Watt LED Wall Pack | 5300 Lumens | 5000K | 100-277V | Built-In Photocell

Product Overview

This 40 Watt LED Wall Pack is designed for exterior wall mounting on commercial and industrial buildings. It delivers 5300 lumens at 5000K, providing clear, neutral-white illumination for perimeter and security applications. The fixture includes a built-in photocell for dusk-to-dawn operation and is suitable for mounting heights typically ranging from 8 to 15 feet.

The housing is constructed from die-cast aluminum with a polycarbonate lens, offering durability in outdoor environments. This wall pack is commonly used as a direct replacement for 150 Watt metal halide wall packs on building exteriors, loading areas, and service entrances.

Core Performance and Output

This fixture outputs 5300 lumens at 40 watts, achieving an efficacy of 133 lumens per watt. The 120° beam angle provides wide coverage for wall-adjacent areas, supporting uniform illumination along building perimeters and entry points. Color temperature is 5000K with a CRI above 75, suitable for security and general exterior visibility.

Electrical performance includes 100-277V input, a power factor above 0.90, and THD below 20%. At mounting heights below 8 feet, output may be excessive for pedestrian-only areas. Uniformity can decrease if spacing exceeds typical wall pack intervals or if mounted above 15 feet.

Adjustability and Control Options

This wall pack includes a built-in photocell for automatic dusk-to-dawn operation. 0-10V dimming capability is available for integration with compatible controls, though most installations use the photocell as the primary control method. The fixture is non-adjustable in terms of aiming; it is designed for fixed wall mounting with a forward throw distribution.

No field-adjustable beam or color temperature options are provided. Control wiring access is available for dimming integration if required by site controls.

Longevity and Reliability

The fixture is rated for 50,000 hours of L70 life, supporting multi-year operation in demanding exterior environments. The die-cast aluminum housing and polycarbonate lens resist impact and weathering. The IP65 rating protects against dust and water ingress, suitable for exposed outdoor locations.

Operating temperature range is -40°F to 122°F, allowing use in most North American climates. The integrated driver and LED array are designed for consistent performance over the rated life, with minimal maintenance required beyond periodic cleaning.

Build Quality and Physical Characteristics

The fixture measures 14.3 x 9.1 x 7.5 inches and weighs 8 lbs. The bronze finish is standard for commercial exterior applications. The housing is die-cast aluminum for corrosion resistance and structural integrity. The lens is polycarbonate for impact resistance and UV stability.

All wiring and mounting hardware are accessible from the rear, supporting standard wall mounting practices. The fixture is designed for direct surface mounting to masonry, concrete, or structural exterior walls.

Where This Product Fits Best

This wall pack is intended for exterior wall mounting on commercial and industrial buildings where moderate output is required for safety, security, and general illumination. It is suitable for use in environments exposed to weather, dust, and temperature fluctuations.

• security lighting
• building facade lighting
• building exterior lighting
• commercial exterior wall lighting
• perimeter lighting
• entry lighting
• service area lighting
• loading area lighting

The IP65 rating and robust construction allow use in wet locations and areas subject to wind-driven rain or debris. The fixture is not intended for hazardous, marine, or food processing environments.

Installation and Long-Term Use

Installation is direct to exterior wall surfaces using standard mounting hardware. The fixture supports 100-277V input and includes a built-in photocell for automatic operation. All wiring connections are made within the rear housing compartment.

Routine maintenance is limited to lens cleaning and periodic inspection of seals and hardware. The fixture is designed for minimal service requirements over its rated life. Replacement of the integrated photocell or driver is not field-serviceable and would require fixture replacement if failure occurs.

How This Fixture Is Commonly Used

This wall pack is typically installed at mounting heights between 8 and 15 feet along building perimeters, above entry doors, or adjacent to loading and service areas. Spacing is generally 20 to 30 feet apart, depending on required light levels and site geometry.

In most deployments, the built-in photocell provides dusk-to-dawn operation without additional controls. Higher output reduces fixture count but may increase glare if mounted at lower heights or in pedestrian-heavy areas. Layout should consider uniformity and avoidance of shadowing near building features.

Safety, Certifications, and Warranty

This fixture is ETL certified and IP65 rated. It meets requirements for wet location installation on commercial and industrial buildings. The product is eligible for utility rebate programs where applicable.

A 5-year warranty covers manufacturing defects and performance. No special safety procedures are required beyond standard electrical and ladder safety during installation and maintenance.

Frequently Asked Questions

Q: What is the recommended mounting height for this 40W wall pack?

A: Typical mounting height is 8 to 15 feet for optimal coverage and uniformity.

Q: Does the fixture include a built-in photocell?

A: Yes, a photocell is integrated for automatic dusk-to-dawn operation.

Q: Is this wall pack suitable for wet locations?

A: Yes, the fixture is IP65 rated for wet location use.

Q: Can this fixture be dimmed?

A: 0-10V dimming is supported if compatible controls are installed.

Q: What is the typical spacing between fixtures for perimeter lighting?

A: Spacing is generally 20 to 30 feet apart, depending on site requirements and desired light levels.

Application Questions and Clarification

Q: Is this wall pack appropriate for use in loading area lighting?

A: Yes, it is commonly used for loading area lighting on building exteriors.

Q: Can this fixture be installed for entry lighting at commercial buildings?

A: Yes, it is suitable for entry lighting and provides adequate illumination for doorways and access points.

Q: Is this fixture intended for hazardous or marine environments?

A: No, this wall pack is not rated for hazardous or marine environments. It is designed for standard exterior wall applications.