26 Watt LED Security Wall Pack | 3588 Lumens | 5000K | 100-277V | Built-In Photocell

Product Overview

This 26 watt LED security wall pack delivers 3588 lumens at 5000K, designed as a direct replacement for 100 watt metal halide fixtures. The fixture operates on 100-277V input and includes a built-in photocell for automatic dusk-to-dawn operation without external controls or timers.

Construction consists of die-cast aluminum housing with anti-static powder-coated bronze finish. The impact-resistant polycarbonate lens provides both durability and glare reduction. At 138 lumens per watt, this fixture significantly reduces energy consumption compared to the metal halide systems it replaces.

The fixture measures 5.25 inches wide by 8.6 inches high by 3 inches deep and weighs 5 pounds. Rated lifespan is 50,000 hours at L70.

Where This Product Fits Best

This wall pack is built for commercial and industrial exterior applications where consistent perimeter lighting is required. The IP65 rating allows installation in locations exposed to rain, wind-driven dust, and direct water spray from any direction. Operating temperature range spans -4°F to 113°F, supporting use in most climate zones.

The 5000K color temperature produces a neutral daylight appearance suited to security and safety lighting around building entrances, loading docks, parking areas, and service corridors. Type 5 distribution spreads light broadly across the mounting surface plane rather than projecting it forward, making this fixture appropriate for general area illumination rather than targeted throw.

At 26 watts and 3588 lumens, this fixture fits applications currently served by 100 watt metal halide wall packs. Facilities upgrading from legacy HID systems will find the output and distribution pattern familiar while gaining the photocell automation and reduced maintenance interval.

Performance and Functional Considerations

Output is fixed at 26 watts and 3588 lumens. This fixture does not dim and has no wattage or lumen adjustment. The single output level simplifies operation but means light levels cannot be reduced during overnight hours or adjusted for changing conditions.

The built-in photocell activates the fixture at dusk and deactivates it at dawn automatically. There is no manual override or timer function. Facilities requiring scheduled on/off control independent of ambient light will need external switching or a different fixture configuration.

CRI is rated at 80 or higher, which is standard for security and general outdoor lighting. Power factor exceeds 0.90 and total harmonic distortion is below 20%, supporting stable operation on commercial electrical systems without excessive line noise or power quality concerns.

Installation and Long-Term Use

This fixture mounts directly to exterior walls using standard hardware patterns. The 5-pound weight and compact footprint allow single-person installation in most cases. Die-cast aluminum construction and powder-coated finish resist corrosion in outdoor environments.

The 100-277V input range covers standard commercial voltages without requiring a transformer or voltage-specific model selection. Verify site voltage falls within the 50-60Hz frequency range before installation.

Rated lifespan of 50,000 hours at L70 means the fixture will maintain at least 70 percent of initial output over that period under normal operating conditions. The polycarbonate lens resists impact and UV degradation, reducing the likelihood of lens replacement over the fixture''s service life.

How This Fixture Is Commonly Used

After installation, this wall pack operates without ongoing adjustment. The photocell handles on/off switching based on ambient light, so the fixture requires no manual intervention for daily operation. Facilities typically install these at consistent intervals around building perimeters and do not interact with them again unless maintenance is required.

The Type 5 distribution pattern spreads light outward in all directions from the fixture rather than projecting a focused beam. This makes the fixture well suited to illuminating areas directly below and beside the mounting point rather than reaching across a parking lot or distant surface.

Because output is fixed and there is no dimming capability, the fixture runs at full power whenever the photocell determines ambient light is low enough. Facilities that need occupancy-based control or scheduled dimming will need to plan accordingly.

Safety, Certifications, and Warranty

This fixture is UL listed. It is rebate eligible through applicable utility programs.

IP65 rated. The fixture tolerates direct water jets from any angle and resists dust ingress, supporting exposed exterior mounting without additional weatherproofing.

We provide a 5-year warranty on this fixture.

Frequently Asked Questions

What voltage does this wall pack require?
The fixture operates on 100-277V at 50-60Hz, covering standard commercial voltage ranges without additional transformers.

What does this fixture replace?
This 26 watt LED wall pack is a direct replacement for 100 watt metal halide fixtures.

Is this fixture rated for wet locations?
Yes. The IP65 rating allows installation in locations exposed to rain and direct water spray.

Can this fixture be dimmed?
No. This fixture operates at fixed output only and does not support dimming.

Is this fixture eligible for utility rebates?
This fixture is rebate eligible. Contact your local utility to confirm program requirements.

What is the warranty period?
This fixture carries a 5-year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.