15 Watt Semi Cutoff LED Wall Pack | 1950 Lumens | 5000K | 100-277V
Neil Peterson | CEO and Chief Lighting Specialist
88 in stock
Product Specifications
Key Features
| Brand | LED Lighting Supply |
| Watts | 15 |
| Lumens | 1950 |
| Lumens Per Watt | 130 |
| Replaces | 70 Watt Metal Halide |
| Voltage | 100V-277V |
| Color Temperature | 5000K |
| CRI | 70+ |
| Dimming | No |
| Optics | Polycarbonate Lens |
| Lifespan | 50,000 (L70) hours |
| Mounting | Wall |
| Fixture Color | Bronze |
| Frequency (Hz) | 50/60 |
| Power Factor | > .90 |
| THD | < 20% |
Durable Construction
| Housing | Die-Cast Aluminum |
| IP Rating | IP65 |
| Operating Temperature | -40°F to 113°F |
| Certifications | ETL | Rebate Eligible |
| Warranty | 5 years |
Measurements
| Dimensions (in) | 7.72 X 5.83 X 6.54 |
| Weight (lbs) | 3.2 |
Product Overview
This 15-watt semi cutoff LED wall pack provides 1,950 lumens of exterior wall-mounted illumination at 5000K. Its compact die-cast aluminum housing and polycarbonate lens suit exterior locations requiring controlled light distribution from a wall surface.
The fixture operates on 100-277V and replaces a 70-watt metal halide wall pack. The bronze housing is intended for direct wall mounting where a low-output exterior fixture is needed.
Core Performance and Output
This wall pack produces 1,950 lumens at 130 lumens per watt. The semi cutoff distribution directs light outward and downward from the mounting surface while limiting upward output.
Electrical operation is 100-277V, 50/60Hz, with a power factor greater than 0.90 and THD below 20%. At low mounting locations, fixture placement should account for the 5000K color temperature and concentrated wall-mounted output.
Adjustability and Control Options
This fixture is non-dimming. It operates at its rated 15-watt output when energized.
No adjustable wattage, color temperature, or optical settings are specified. Fixture placement and mounting location determine the final distribution pattern.
Longevity and Reliability
The LED system is rated for 50,000 L70 hours. L70 indicates the point at which the light output is expected to maintain 70 percent of its initial output.
The fixture operates in ambient temperatures from -40F to 113F. This operating range supports year-round exterior use within the stated temperature limits.
Build Quality and Physical Characteristics
The housing is die-cast aluminum with a bronze finish. The lens is polycarbonate.
This wall pack measures 7.72 x 5.83 x 6.54 inches and weighs 3.2 pounds. Its IP65 rating supports exterior exposure to dust and water.
Where This Product Fits Best
This fixture fits exterior wall locations where moderate-output illumination is needed at entries, perimeter walls, service-side walls, and building surfaces. Its wall-mounted semi cutoff form is suited to close-range exterior lighting rather than broad area coverage.
- security lighting
- building exterior lighting
- commercial exterior wall lighting
- building facade lighting
- entry lighting
- perimeter lighting
- service area lighting
The IP65 enclosure, die-cast aluminum housing, and -40F to 113F operating range support exposed exterior conditions. The 1,950-lumen output is appropriate where controlled wall-mounted light is needed without high-output area lighting levels.
Installation and Long-Term Use
The fixture mounts directly to a wall. Confirm the mounting surface, junction box condition, supply voltage, and wire connections before installation.
The compact 3.2-pound fixture places limited load on the mounting surface, but the wall and mounting hardware must still support the installed fixture. Maintain access for future cleaning, inspection, and fixture replacement.
How This Fixture Is Commonly Used
In security lighting, building exterior lighting, and commercial exterior wall lighting layouts, fixtures are positioned along wall surfaces to create localized illumination near entries, perimeter sections, and service areas. Mounting height follows the wall geometry and the area requiring light.
Fixtures are commonly arranged in repeated wall-mounted locations where continuous coverage is required along a building exterior or perimeter. Spacing varies with mounting height, target light levels, wall obstructions, and the semi cutoff distribution.
Safety, Certifications, and Warranty
This fixture is ETL certified. It is rebate eligible.
The fixture has an IP65 rating and a 5-year warranty. Operating temperature is -40F to 113F.
Frequently Asked Questions
Q: What is the light output of this wall pack?
A: This fixture produces 1,950 lumens at 15 watts.
Q: What voltage does this fixture use?
A: The fixture operates on 100-277V, 50/60Hz power.
Q: Is this wall pack dimmable?
A: No. This fixture is non-dimming.
Q: What mounting method does this fixture use?
A: This fixture is designed for wall mounting.
Q: What environmental rating does this fixture have?
A: This fixture is rated IP65 and operates from -40F to 113F.
Application Questions and Clarification
Q: Is this fixture appropriate for commercial exterior wall lighting?
A: Yes. Commercial exterior wall lighting is a listed application, and the fixture has wall mounting, an IP65 rating, and 1,950 lumens of output.
Q: Can this fixture be used for entry lighting?
A: Entry lighting is a listed secondary application. Final placement depends on the entry layout, mounting location, and required light levels.
Q: What should be considered when planning fixture placement for perimeter lighting?
A: Mounting height, target light levels, wall obstructions, and the semi cutoff distribution affect fixture placement. The supplied product data does not establish a specific spacing value.
Web ID: 1772