90 / 120 / 150 Watt Adjustable LED Flood Light | 15750 to 26250 Lumens | 3000K / 4000K / 5000K Adjustable | 100-277V | Built-In Photocell

Product Overview

This LED flood light offers adjustable wattage settings of 90, 120, or 150 watts and selectable color temperatures of 3000K, 4000K, or 5000K. Output ranges from 15,750 to 26,250 lumens, supporting a wide range of exterior and area lighting needs.

The fixture is built with a heavy-duty, powder-coated die-cast aluminum housing and tempered glass optics. It is available with either a yoke or slipfitter mount for installation flexibility.

A built-in button photocell is included and can be disabled if not required. The fixture is designed for use on 100-277V circuits and operates at 50-60Hz.

It is suitable for replacing 250 or 400 watt metal halide flood lights. The fixture measures 10.2 inches wide by 11.2 inches high by 2.6 inches deep and weighs 8 pounds.

Where This Product Fits Best

This flood light is suited for exterior building perimeters, parking lots, loading docks, and general area lighting where adjustable output and color temperature are required.

It is appropriate for environments that require a robust fixture with high ingress protection and impact resistance. The fixture can be used in locations exposed to rain, dust, and physical contact.

Mounting options support installation on poles, walls, or structural surfaces using either yoke or slipfitter hardware. The EPA rating of 0.95 supports use in outdoor applications where wind load is a consideration.

The fixture is compatible with 100-277V electrical systems, making it suitable for most commercial and industrial sites.

Performance and Functional Considerations

The wattage and color temperature can be set during installation to match site requirements. Output can be adjusted between 15,750, 21,000, or 26,250 lumens, and color temperature can be set to 3000K, 4000K, or 5000K.

The fixture delivers 175 lumens per watt and has a CRI of 80+. The beam angle is 120 degrees, providing wide area coverage.

It is rated for 164,000 hours (L70) of operation. The power factor is 0.9 and total harmonic distortion is 15%.

Surge protection is built in, rated at 6KV line-to-line and 10KV line-to-earth. The fixture operates in ambient temperatures from -40°F to 122°F.

Installation and Long-Term Use

The fixture can be mounted using either a yoke or slipfitter, depending on the site requirements. The 16-inch cord supports standard wiring practices for exterior installations.

The powder-coated aluminum housing resists corrosion and is designed for long-term outdoor use. The tempered glass lens protects the LEDs from impact and environmental exposure.

IP66 rating allows the fixture to withstand high-pressure water jets and dust ingress. IK07 rating provides resistance to moderate impacts.

Routine maintenance is minimized due to the long LED lifespan and sealed construction. The built-in photocell can be used for dusk-to-dawn operation or disabled if not needed.

How This Fixture Is Commonly Used

After installation, you can set the wattage and color temperature to match the lighting needs of the area. This allows for on-site adjustment if requirements change or if different areas need different light levels or color appearance.

The fixture is often relied on for consistent, wide-area illumination in outdoor environments. The 120-degree beam angle provides broad coverage, reducing the number of fixtures needed for large spaces.

The built-in photocell can be used to automate on/off operation based on ambient light, or it can be turned off if manual or other control methods are preferred.

Once installed, the fixture requires minimal attention aside from periodic inspection, as the sealed housing and robust construction are designed for extended service in demanding environments.

Safety, Certifications, and Warranty

This fixture is ETL listed and DLC Premium qualified.

IP66 rating allows use in wet and dusty environments. IK07 rating provides resistance to moderate impacts from accidental contact or debris.

Surge protection is integrated for electrical safety in outdoor and exposed locations.

LED Lighting Supply provides a 5-year warranty on this fixture.

Frequently Asked Questions

What voltage does this fixture support?
This fixture operates on 100-277V circuits.

What is the output range?
Output is adjustable between 15,750, 21,000, and 26,250 lumens.

What mounting options are available?
Yoke and slipfitter mounting options are available.

What certifications does this fixture carry?
This fixture is ETL listed and DLC Premium qualified.

What is the environmental rating?
The fixture is rated IP66 for water and dust protection and IK07 for impact resistance.

What is the warranty period?
LED Lighting Supply provides a 5-year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.