800 Watt LED Stadium Light | 120000 Lumens | 5700K | 100-277V | Optional Remote Driver

Product Overview

This LED flood light offers adjustable wattage settings of 90, 120, or 150 watts and selectable color temperatures of 3000K, 4000K, or 5000K. Output ranges from 15,750 to 26,250 lumens, supporting a wide range of exterior and area lighting needs.

The fixture is built with a heavy-duty, powder-coated die-cast aluminum housing and features tempered glass optics. It is available with either a yoke or slipfitter mount for installation flexibility.

A built-in button photocell is included and can be disabled if not required. The fixture operates on 100-277V input and is rated for 50-60Hz frequency.

With a rated lifespan of 164,000 hours (L70), this flood light is designed for long-term, low-maintenance operation in demanding environments.

Where This Product Fits Best

This fixture is suitable for exterior building facades, perimeter security lighting, parking areas, and general site illumination where adjustable output and color temperature are required.

It is designed to replace 250 or 400 watt metal halide flood lights, providing a direct LED alternative for retrofit or new installations.

The IP66 rating allows use in wet locations and exposure to rain, dust, and other outdoor conditions. The IK07 rating supports use in areas where moderate impact resistance is needed.

Mounting options include yoke and slipfitter, supporting installation on poles, walls, or structural surfaces commonly found in commercial and industrial sites.

Performance and Functional Considerations

The wattage and color temperature can be set during installation to match site requirements. Output can be adjusted between 15,750 and 26,250 lumens, and color temperature can be set to 3000K, 4000K, or 5000K as needed.

The fixture delivers 175 lumens per watt and maintains a CRI of 80+, supporting visibility and color rendering in exterior environments.

It operates on 100-277V input, accommodating a wide range of electrical systems. Power factor is 0.9 and total harmonic distortion is 15%.

Surge protection is rated at 6KV line-line and 10KV line-earth, supporting operation in areas with electrical disturbances.

Installation and Long-Term Use

The fixture is supplied with a 16-inch cord and weighs 8 lbs, allowing for manageable handling during installation. Dimensions are 10.2 inches wide by 11.2 inches high by 2.6 inches deep.

Mounting can be completed using either the yoke or slipfitter option, depending on the site?s requirements. The EPA rating of 0.95 supports use on poles where wind load is a consideration.

The powder-coated aluminum housing resists corrosion, and the IP66 rating allows for installation in exposed outdoor locations without additional weather protection.

Operating temperature range is -40°F to 122°F, supporting year-round use in a variety of climates.

How This Fixture Is Commonly Used

After installation, you can set the wattage and color temperature to match the lighting needs of the area. This allows adjustment for brightness and appearance without changing fixtures.

The built-in photocell can be used to automate dusk-to-dawn operation or turned off if manual or alternate control is preferred. Once set, the fixture operates with minimal user interaction.

The fixture?s output and color settings remain stable during daily use. No dimming is available, so output is fixed at the selected wattage and color temperature.

Routine maintenance is limited to visual inspection and cleaning, as the fixture is designed for long service life and does not require lamp or ballast replacement.

Safety, Certifications, and Warranty

This fixture is ETL listed and DLC Premium qualified.

IP66 rating allows use in wet locations and exposure to rain and dust. IK07 rating supports use in areas with moderate risk of impact.

Surge protection is rated at 6KV line-line and 10KV line-earth.

LED Lighting Supply provides a 5-year warranty on this fixture.

Frequently Asked Questions

What voltage does this fixture support?
This fixture operates on 100-277V input.

What is the output range?
Output is adjustable from 15,750 to 26,250 lumens, depending on the selected wattage.

What are the available mounting options?
Mounting options include yoke and slipfitter.

What certifications does this fixture carry?
This fixture is ETL listed and DLC Premium qualified.

What is the warranty period?
LED Lighting Supply provides a 5-year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.