50 Watt LED Flood Light | 6900 Lumens | 5000K | 100-277V

Product Overview

This 50 watt LED flood light delivers 6900 lumens at 5000K, operating as a direct replacement for 250 watt metal halide fixtures. The fixture runs on 100-277V input and produces 138 lumens per watt from a 120-degree beam angle through a polycarbonate lens.

The aluminum housing carries an IP65 rating and is finished in bronze. Trunnion mounting allows adjustable aiming after installation. The fixture measures 11.5 x 7 x 5.5 inches and weighs 14 pounds.

Dimming is supported via 1-10V protocol. Rated lifespan is 50,000 hours. Operating temperature range spans -31°F to 131°F.

Where This Product Fits Best

This flood light fits applications requiring moderate output in a compact form factor. At 6900 lumens, it handles building facades, signage, small parking areas, loading dock perimeters, and pathway lighting where a 250 watt metal halide previously served.

The 100-277V input accommodates standard commercial voltage systems without requiring a transformer or driver swap. The IP65 rating allows permanent outdoor installation where the fixture will encounter rain, snow, and hose-down cleaning. The -31°F to 131°F operating range supports use in cold storage transition zones and unconditioned exterior spaces.

Trunnion mounting suits wall, pole, or ground-plane installations where aiming adjustment is needed to direct light at specific targets. The bronze finish blends with architectural exteriors common on commercial buildings.

Performance and Functional Considerations

The 5000K color temperature produces a neutral white light suitable for security applications and general area illumination where color rendering is secondary to visibility. CRI is rated at 75+, which handles wayfinding and object recognition but is not intended for color-critical tasks.

The 120-degree beam angle provides broad coverage from each fixture position. This wide distribution reduces hot spots and transitions to surrounding darkness more gradually than narrower optics.

THD is under 15%, which keeps electrical noise low on shared circuits. The 50/60 Hz frequency compatibility covers both North American and international power standards.

Installation and Long-Term Use

The trunnion mount accepts standard hardware and allows vertical and horizontal adjustment during installation. At 14 pounds, the fixture can be handled by a single installer but may require a second set of hands during final aiming.

The aluminum housing dissipates heat without corroding in wet conditions. The polycarbonate lens resists impact better than glass and maintains optical clarity over the fixture''s service life.

With a 50,000-hour rated lifespan, lamp replacement is not a maintenance consideration under normal operating cycles. The 1-10V dimming input connects to building automation or standalone dimmer modules where output reduction is needed.

How This Fixture Is Commonly Used

Facilities replacing aging metal halide floods typically install this fixture in the same location using existing wiring. The trunnion allows field adjustment if the mounting position has shifted or the target area has changed since the original installation.

The 1-10V dimming capability lets operators reduce output during low-activity periods or integrate the fixture into photocell or time-clock schedules. Dimming also extends effective lifespan when full output is not required for the entire operating window.

Maintenance crews find the aluminum housing easy to wipe down. The IP65 rating means incidental pressure washing during building exterior cleaning will not compromise the fixture.

Safety, Certifications, and Warranty

This fixture is UL listed. We back it with a 5-year warranty.

Frequently Asked Questions

What does this fixture replace?
This 50 watt LED flood light replaces 250 watt metal halide fixtures.

What voltage does this fixture accept?
The fixture operates on 100-277V input at 50/60 Hz.

Is this fixture rated for outdoor use?
Yes. The IP65 rating allows installation in locations exposed to rain and direct water spray.

What mounting option is included?
The fixture includes a trunnion mount for adjustable installation on walls, poles, or other surfaces.

What is the warranty coverage?
This fixture carries a 5-year warranty.

Does this fixture support dimming?
Yes. The fixture accepts 1-10V dimming signals.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.