36 / 50 / 63 Watt Adjustable LED Flood Light | 5580 to 9700 Lumens | 3000K / 4000K / 5000K Adjustable | 100-277V | Built-In Photocell

Product Overview

This LED flood light delivers 5580 to 9700 lumens through a field-adjustable wattage system operating at 36, 50, or 63 watts. Color temperature is also adjustable on-site, with settings for 3000K, 4000K, or 5000K. The fixture operates on 100-277V input and includes a built-in photocell for dusk-to-dawn operation.

The housing is die-cast aluminum with an anti-corrosion powder coat finish in bronze. Tempered glass optics protect the LED array and distribute light at a 120-degree beam angle. The fixture weighs 3.5 pounds and measures 10.8 inches by 8.0 inches by 2.5 inches.

This fixture replaces 150 to 250 watt metal halide systems while consuming substantially less power. At all wattage settings, the fixture maintains 153 lumens per watt efficacy with a CRI of 80+.

Where This Product Fits Best

This flood light is suited for exterior building illumination, parking areas, loading zones, signage lighting, and general area lighting where dusk-to-dawn control is needed. The IP65 rating allows installation in locations exposed to rain, dust, and hose-down conditions without requiring additional enclosures.

The operating temperature range of -40 degrees F to 113 degrees F supports installation in cold-climate and high-heat environments. An EPA rating of 0.8 provides the wind load data needed for pole and wall mount calculations in exposed locations.

Mounting options include yoke or knuckle configurations, allowing installation on flat surfaces, poles, or angled structures depending on site requirements.

Performance and Functional Considerations

The three-stage wattage adjustment allows output to be set based on actual site conditions. The 36-watt setting produces 5580 lumens, the 50-watt setting produces 7750 lumens, and the 63-watt setting produces 9700 lumens. Once adjusted during installation, the fixture operates at that output level continuously.

Color temperature selection between 3000K, 4000K, and 5000K is set on-site before final commissioning. Lower color temperatures produce warmer light suitable for architectural or hospitality settings, while higher color temperatures provide cooler light common in security and utilitarian applications.

The built-in photocell enables automatic on-off operation based on ambient light levels, eliminating the need for external timers or manual switching. The 50,000-hour rated lifespan at L70 provides extended service intervals compared to the metal halide systems this fixture replaces.

Installation and Long-Term Use

The fixture accepts 100-277V input at 50-60Hz, covering standard commercial voltage ranges without requiring external transformers. Power factor is rated at 0.9 with total harmonic distortion at 15%. This fixture does not support dimming.

Yoke mounting allows adjustable aiming on a single axis with the fixture suspended below the mounting arm. Knuckle mounting allows multi-axis adjustment and positions the fixture closer to the mounting surface. Both methods use the same fixture body.

The die-cast aluminum housing and powder coat finish resist corrosion in exterior environments. At 3.5 pounds, the fixture can be supported by standard junction boxes and mounting hardware rated for its weight and EPA.

How This Fixture Is Commonly Used

After installation, wattage and color temperature settings remain fixed. Facilities that need uniform appearance across multiple mounting locations can set all fixtures to the same output and color. Facilities with varied spacing or mounting heights can adjust individual fixtures to balance light levels without installing different fixture models.

The photocell controls on-off operation automatically. In typical use, the fixture turns on at dusk and off at dawn without user intervention. This reduces the need for manual switching or timer programming for exterior security and area lighting.

Maintenance primarily involves periodic cleaning of the tempered glass lens to maintain output. The sealed IP65 construction prevents internal contamination from dust or moisture intrusion.

Safety, Certifications, and Warranty

This fixture is UL listed and rebate eligible. The IP65 rating allows exposure to water jets and dust without damage to internal components. The operating temperature range supports installation in environments from -40 degrees F to 113 degrees F.

We provide a 5-year warranty on this fixture.

Frequently Asked Questions

What voltage does this fixture require?
The fixture operates on 100-277V at 50-60Hz.

Can this fixture be dimmed?
No. This fixture does not support dimming.

What does this fixture replace?
This fixture replaces 150 to 250 watt metal halide systems.

Is this fixture rebate eligible?
Yes. This fixture is rebate eligible.

What is the IP rating?
IP65. The fixture can be installed in locations exposed to rain, dust, and direct water spray.

What mounting options are available?
Yoke mount and knuckle mount configurations are available.

What is the warranty period?
This fixture carries a 5-year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.