35 / 60 / 80 Watt Adjustable LED Flood Light | 4050 to 10800 Lumens | 3000K / 4000K / 5000K Adjustable | 100-277V | Knuckle or Yoke Mount

Product Overview

This LED flood light delivers adjustable output from 35 to 80 watts, producing 4,050 to 10,800 lumens depending on the selected wattage setting. Color temperature is field-adjustable between 3000K, 4000K, and 5000K. The fixture operates on 100-277V input and serves as a direct replacement for 250-watt metal halide systems.

The housing is die-cast aluminum with an anti-corrosion powder coat finish in bronze. A tempered glass lens protects the LED array. The fixture is available with either yoke or knuckle mounting hardware, and dimensions measure 10.5 inches long by 9.85 inches wide at a weight of 8 pounds.

Where This Product Fits Best

This fixture is built for outdoor flood lighting applications where a 250-watt metal halide replacement is appropriate. The IP65 rating allows installation in locations exposed to rain, dust, and washdown spray. Operating temperature range spans -4°F to 140°F, supporting use in cold storage entry areas, unconditioned loading docks, and hot climates.

The 0.96 EPA rating makes this fixture suitable for pole- or wall-mounted installations where wind load is a design factor. With lumen output ranging from 4,050 to 10,800, this fixture fits applications from accent lighting to general area illumination across parking areas, building facades, signage, and perimeter security zones.

Performance and Functional Considerations

Lumen output scales with wattage: 4,050 lumens at 35 watts, 8,100 lumens at 60 watts, and 10,800 lumens at 80 watts. Efficacy remains consistent at 135 lumens per watt across all settings. CRI is rated at 70 or higher, appropriate for general outdoor illumination where color accuracy is not critical.

This fixture is not dimmable. Power factor is 0.9 with total harmonic distortion at 15%, and the fixture accepts 50-60Hz input. Rated lifespan is 50,000 hours at L70, meaning output will remain at or above 70% of initial lumens through that interval under normal operating conditions.

Installation and Long-Term Use

Mounting is accomplished via yoke or knuckle hardware, depending on the configuration selected. Yoke mounting allows tilt adjustment for wall or surface applications. Knuckle mounting is typical for arm or pole installations where directional aiming is required.

The powder-coated aluminum housing resists corrosion and does not require refinishing under normal outdoor exposure. The tempered glass lens withstands thermal cycling and impact better than standard glass or acrylic alternatives. At 8 pounds, the fixture is manageable for single-person installation in most mounting scenarios.

How This Fixture Is Commonly Used

Wattage and color temperature are adjusted on the fixture before or during installation. This allows a single unit to be configured for different output levels and visual tones based on the specific area being lit. Once set, the fixture operates at that configuration without further adjustment required.

In practice, the 35-watt setting is used for lower-output accent or signage lighting. The 60- and 80-watt settings are typical for parking areas, building perimeters, and security lighting where higher output is needed. Color temperature selection depends on preference and surrounding lighting?3000K for warmer appearance, 5000K for a cooler, higher-contrast look.

Safety, Certifications, and Warranty

This fixture is UL listed and rebate eligible. The IP65 rating allows exposure to water jets and dust ingress without damage to internal components.

We provide a 5-year warranty on this fixture.

Frequently Asked Questions

What wattage and lumen options are available?
The fixture is adjustable to 35, 60, or 80 watts, producing 4,050, 8,100, or 10,800 lumens respectively.

What color temperatures can be selected?
The fixture supports 3000K, 4000K, or 5000K, selectable on the unit.

Is this fixture compatible with 120V and 277V circuits?
Yes. The fixture accepts 100-277V input.

What metal halide wattage does this replace?
This fixture is a replacement for 250-watt metal halide systems.

Is the fixture dimmable?
No. This fixture does not support dimming.

What is the warranty coverage?
This fixture is covered by a 5-year warranty.

Is this fixture eligible for utility rebates?
Yes. This fixture is rebate eligible.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.