200 Watt LED Area Flood Light | 26000 Lumens | 5000K | 100-277V

Product Overview

This 200 Watt LED Area Flood Light is designed for exterior area illumination where high output and broad coverage are required. It delivers 26,000 lumens at 5000K, providing daylight-white visibility for demanding outdoor environments. The fixture is built for use in locations such as bridge lighting and construction site lighting, where durability and consistent performance are essential.

The trunnion mount allows for flexible aiming on flat surfaces or structural members. Typical mounting heights range from 18 to 35 feet, making this unit suitable for medium to large-scale exterior projects. This model is a direct replacement for 400 Watt metal halide flood lights, offering improved efficiency and reduced maintenance.

Core Performance and Output

This fixture outputs 26,000 lumens at 130 lumens per watt, providing high-intensity illumination for large outdoor areas. The 120° beam angle delivers wide, even coverage suitable for open sites and perimeter lighting. Color temperature is 5000K, supporting clear visibility and accurate color rendering in exterior environments.

Electrical performance is stable across 100-277V input, with total harmonic distortion under 15%. The fixture is non-dimmable. At mounting heights below 15 feet, output may be excessive and cause glare. Uniformity may decrease at mounting heights above 35 feet without careful aiming or supplemental fixtures.

Adjustability and Control Options

The trunnion mount provides full adjustability for precise aiming. The fixture can be rotated and locked at the desired angle to target specific zones or minimize spill light. No integrated dimming or advanced controls are included in this model.

External control systems, such as photocells or time switches, can be added at the circuit level if required. The fixture is compatible with standard on/off switching and can be integrated into existing lighting control infrastructure.

Longevity and Reliability

The LED array is rated for 50,000 hours of operation, supporting long-term deployment in demanding outdoor environments. The fixture is designed for consistent performance in temperature ranges from -31°F to 131°F.

Powder coated aluminum housing and a tempered glass lens protect internal components from impact and weather exposure. The IP65 rating ensures resistance to dust and water jets, supporting reliable operation in rain, dust, and construction debris.

Build Quality and Physical Characteristics

The fixture housing is constructed from powder coated aluminum for corrosion resistance and durability. The tempered glass lens provides impact protection and maintains optical clarity. The unit measures 14.2 x 15.7 x 5.5 inches and weighs 21 pounds.

All hardware is designed for exterior use. The black finish is UV-stable and resists fading. The fixture?s EPA rating is 1.7, supporting secure mounting in exposed outdoor locations subject to wind loads.

Where This Product Fits Best

This flood light is suited for exterior environments requiring high-output, wide-area illumination. It is commonly installed in locations where durability, weather resistance, and reliable performance are critical.

• area lighting
• bridge lighting
• construction site lighting
• building facade lighting
• security lighting
• parking lot lighting
• event venue lighting
• loading area lighting

The fixture is suitable for wet locations and can be deployed in environments with dust, rain, and temperature fluctuations. Not recommended for interior use or locations requiring dimming or advanced controls.

Installation and Long-Term Use

The trunnion mount allows for direct attachment to walls, structural steel, or concrete pads. Secure mounting is required to withstand wind loads and vibration. The fixture?s weight and EPA should be considered when selecting mounting hardware and surfaces.

Routine inspection of mounting hardware and lens cleanliness is recommended for long-term reliability. The fixture is designed for minimal maintenance, with no lamp or ballast replacements required. Electrical connections should be made in accordance with local codes and weatherproofed as needed.

How This Fixture Is Commonly Used

Typical mounting heights range from 18 to 35 feet, depending on the area size and required light levels. Fixtures are often spaced to provide overlapping coverage and minimize shadows, with layout patterns adjusted for site geometry and obstructions.

Higher output allows for wider spacing, reducing fixture count, but may increase glare if not aimed carefully. For perimeter security or site lighting, fixtures are commonly installed along property lines or mounted to poles and building facades.

Safety, Certifications, and Warranty

This fixture is ETL listed and IP65 rated. It is suitable for wet locations and meets requirements for exterior area lighting. The product is eligible for energy rebate programs where applicable.

A 5-year warranty covers manufacturing defects and LED performance. All components are rated for outdoor use and comply with relevant safety standards.

Frequently Asked Questions

Q: What is the recommended mounting height for this 200W flood light?

A: Recommended mounting height is 18 to 35 feet for optimal coverage and uniformity.

Q: Can this fixture be used with a photocell or external control system?

A: Yes, external controls such as photocells or timers can be installed at the circuit level.

Q: Is this flood light suitable for use in coastal or corrosive environments?

A: The powder coated aluminum housing offers corrosion resistance, but for highly corrosive or marine environments, a dedicated marine-rated fixture is recommended.

Q: How many fixtures are needed for a typical construction site or parking lot?

A: Fixture count depends on site size, mounting height, and required light levels. Layout should be determined based on photometric analysis or site-specific requirements.

Q: Does the fixture support dimming or advanced lighting controls?

A: This model does not include dimming or integrated control options.

Application Questions and Clarification

Q: Is this flood light appropriate for bridge lighting applications?

A: Yes, this model is commonly installed for bridge lighting due to its output, durability, and weather resistance.

Q: Can this fixture be used for event venue or loading area lighting?

A: The output and beam angle are suitable for event venue and loading area lighting at recommended mounting heights.

Q: Is this fixture suitable for sports court lighting such as basketball or tennis courts?

A: This model can be used for outdoor sports facility lighting, but uniformity and glare control should be evaluated for each application.

Q: What are the environmental limitations for this fixture?

A: The fixture is rated for -31°F to 131°F and IP65 wet location use. It is not intended for submersion or marine environments.