180 / 240 / 300 Watt Adjustable LED Flood Light | 31500 to 52500 Lumens | 3000K / 4000K / 5000K Adjustable | 100-277V | Built-In Photocell

Product Overview

This LED flood light delivers field-adjustable output at 180, 240, or 300 watts with corresponding lumen outputs of 31,500, 42,000, or 52,500. Color temperature is also adjustable on-site between 3000K, 4000K, and 5000K. The fixture operates on 100-277V input and includes a built-in button photocell that can be disabled if not needed.

Construction consists of a heavy-duty die-cast aluminum housing with anti-corrosion powder coating in bronze. The optical assembly uses tempered glass. Mounting options include yoke or slipfitter configurations. At 11.5 pounds with an EPA rating of 1.4, the fixture is sized for standard mounting infrastructure.

This fixture replaces 1000-watt metal halide systems. Rated lifespan reaches 164,000 hours at L70. ETL listed and DLC Premium qualified.

Where This Product Fits Best

The adjustable wattage and color temperature make this fixture suitable for applications where light output or color requirements vary between installation locations or may change over time. Parking lots, building perimeters, loading areas, and storage yards are common placement contexts.

IP66 rating allows installation where the fixture will be exposed to rain, snow, dust, and washdown spray. The operating temperature range of -40°F to 122°F supports year-round outdoor use in extreme climates. IK07 rating provides resistance to moderate physical impact from incidental contact or debris.

The 120-degree beam angle produces wide coverage suited for area lighting rather than focused or directional applications. For installations on poles or wall-mounted arms, both yoke and slipfitter mount options are available.

Performance and Functional Considerations

Lumen output scales with wattage selection: 31,500 lumens at 180 watts, 42,000 lumens at 240 watts, and 52,500 lumens at 300 watts. Efficacy remains consistent at 175 lumens per watt across all settings. CRI is rated at 80 or higher.

The built-in photocell enables dusk-to-dawn operation without external controls. If the installation uses a separate control system or requires continuous operation, the photocell can be turned off. This fixture does not support dimming.

Surge protection is rated at 6kV line-to-line and 10kV line-to-earth. Power factor is 0.9 with THD at 15%. The fixture accepts 50-60Hz frequency input.

Installation and Long-Term Use

Physical dimensions are 14.2 inches wide by 13.2 inches high by 3 inches deep. The 16-inch cord provides connection length for junction box positioning. Weight of 11.5 pounds is manageable for single-person mounting in most configurations.

Yoke mount allows direct attachment to surfaces or brackets with tilt adjustment. Slipfitter mount accepts standard 2-3/8 inch tenons for pole-top installation. Wattage and color temperature selections are made at the fixture during installation or adjusted later if requirements change.

The powder-coated aluminum housing and IP66 sealing minimize maintenance requirements over the rated 164,000-hour lifespan. Tempered glass protects the LED array from environmental exposure and impact.

How This Fixture Is Commonly Used

Facilities replacing aging metal halide flood lights often adjust wattage and color temperature based on the specific area served by each fixture. A loading dock may run at full output with 5000K for task visibility while a parking area uses lower output with 4000K for general illumination.

The photocell is typically left active for exterior installations where automatic dusk-to-dawn switching is preferred. In applications controlled by timers, building management systems, or manual switches, the photocell is disabled at installation.

When installed on poles using the slipfitter mount, the fixture orientation is set during commissioning. Yoke-mounted installations on walls or structural brackets allow ongoing adjustment if coverage needs shift. Once wattage and color are set, the fixture operates without regular interaction outside of periodic inspection.

Safety, Certifications, and Warranty

This fixture is ETL listed and DLC Premium qualified. IP66 rating allows exposure to high-pressure water jets and complete dust ingress protection. IK07 rating withstands moderate mechanical impact.

Surge protection handles transient events up to 6kV line-to-line and 10kV line-to-earth. Operating temperature range spans -40°F to 122°F.

LED Lighting Supply provides a 5-year warranty on this fixture.

Frequently Asked Questions

What voltage does this fixture require?
The fixture operates on 100-277V input at 50-60Hz.

Can I use this fixture outdoors in harsh weather?
Yes. IP66 rating allows exposure to rain, snow, dust, and direct water spray. The operating temperature range is -40°F to 122°F.

What does this fixture replace?
This LED flood light replaces 1000-watt metal halide fixtures.

Is this fixture eligible for utility rebates?
DLC Premium qualification typically supports rebate eligibility through participating utility programs.

What mounting options are available?
The fixture is available with yoke mount or slipfitter mount.

What is the warranty coverage?
LED Lighting Supply provides a 5-year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.