150 Watt LED Flood Light | 19500 Lumens | 5000K | 100-277V

Product Overview

This 150 Watt LED Flood Light delivers 19,500 lumens at 5000K. It is designed for use on 100V to 277V circuits and operates at 50/60 Hz. The fixture uses a trunnion mount and has a 120° beam angle.

The housing is powder coated aluminum with a tempered glass lens. The fixture is finished in black and weighs 17 lbs. Dimensions are 12.9 x 13.3 x 5.5 inches.

This model is rated for a 50,000-hour lifespan and is built for environments requiring a robust, weather-resistant flood light. The EPA rating is 1.37.

It is intended as a replacement for 400 Watt metal halide flood lights and offers a CRI of 70+.

Where This Product Fits Best

This flood light is suitable for exterior and interior applications where a wide, uniform light spread is needed. Typical uses include building facades, loading docks, parking areas, and perimeter lighting.

The IP65 rating allows installation in locations exposed to rain, dust, and other outdoor conditions. The operating temperature range of -31°F to 131°F supports use in both hot and cold climates.

The trunnion mount provides flexibility for aiming the fixture at the desired target area. The 120° beam angle is suited for applications requiring broad coverage rather than focused spot lighting.

Facilities upgrading from 400 Watt metal halide systems can use this fixture as a direct replacement where similar light output and coverage are required.

Performance and Functional Considerations

This fixture produces 130 lumens per watt, providing efficient output for general flood lighting tasks. The 5000K color temperature delivers a daylight-white appearance suitable for security and visibility.

The fixture does not support dimming. It is designed for on/off operation only. The total harmonic distortion is less than 15%.

The tempered glass lens protects the LEDs from impact and environmental exposure. The powder coated aluminum housing resists corrosion in outdoor and industrial settings.

The EPA rating of 1.37 should be considered when mounting the fixture in areas subject to wind loading, especially on poles or exposed structures.

Installation and Long-Term Use

The trunnion mount allows for secure attachment to flat surfaces or brackets and provides adjustability for aiming. The fixture weight of 17 lbs should be factored into mounting hardware selection.

The IP65 rating means the fixture can be installed in wet locations and will withstand direct exposure to rain and dust. The operating temperature range supports year-round use in most climates.

No dimming or advanced controls are built into this model. Standard on/off switching is required. The fixture is not designed for integration with external dimming systems.

With a rated lifespan of 50,000 hours, maintenance intervals are reduced compared to legacy metal halide systems. The tempered glass lens and powder coated housing support long-term durability.

How This Fixture Is Commonly Used

After installation, the trunnion mount allows you to adjust the fixture angle to direct light where needed. Once aimed, the fixture remains fixed in position for consistent coverage.

The 5000K color temperature provides a neutral white light that supports visibility and color recognition in outdoor and security applications. The wide 120° beam angle covers large areas without creating sharp shadows.

Routine operation is limited to standard on/off switching. No dimming or control adjustments are available on this model. The fixture is designed for set-and-forget use in environments where consistent, reliable illumination is required.

Maintenance is minimal due to the long LED lifespan and durable construction. Occasional cleaning of the lens and inspection of mounting hardware are typical post-installation tasks.

Safety, Certifications, and Warranty

This fixture is ETL listed and rebate eligible. The IP65 rating allows use in wet and dusty environments.

The housing and lens are designed to withstand outdoor exposure and physical impacts typical in commercial and industrial settings.

LED Lighting Supply provides a 5-year warranty on this fixture.

The fixture is rated for operation from -31°F to 131°F, supporting safe use in a wide range of environments.

Frequently Asked Questions

What voltage does this fixture support?
This fixture operates on 100V to 277V circuits.

Is this fixture DLC listed?
This fixture is rebate eligible.

What is the environmental rating?
This fixture is rated IP65 for wet and dusty locations.

What mounting method is used?
This fixture uses a trunnion mount.

What is the warranty period?
LED Lighting Supply provides a 5-year warranty on this fixture.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.