15 / 25 / 35 Watt Adjustable LED Flood Light | 2025 to 4700 Lumens | 3000K / 4000K / 5000K | 100-277V | Knuckle or Yoke Mount

Product Overview

This adjustable LED flood light provides 15W, 25W, or 35W output settings with selectable 3000K, 4000K, and 5000K color temperatures. It uses a compact bronze powder-coated aluminum housing with a tempered glass lens.

The fixture supports yoke or knuckle mounting for directional exterior lighting. Its 2025 to 4700 lumen output is suited to localized lighting tasks rather than large-scale high-output layouts.

Core Performance and Output

Output is selectable at 2025, 2700, or 4700 lumens, depending on the wattage setting. Fixture efficacy is 135 lumens per watt, with a 70+ CRI.

The tempered glass lens protects the optical assembly. At lower mounting heights, the 35W setting can create excessive brightness if the fixture is aimed directly into occupied sightlines.

The fixture operates on 100-277V, 50/60Hz power. Power factor is 0.9 and THD is 15%.

Adjustability and Control Options

Wattage is adjustable between 15W, 25W, and 35W. Color temperature is selectable between 3000K, 4000K, and 5000K.

This fixture is non-dimming. Output and color temperature should be set before final aiming and commissioning.

Longevity and Reliability

Rated life is 50,000 L70 hours. The stated operating temperature range is -4F to 140F.

The sealed IP65 construction helps protect the fixture in exterior conditions. Long-term performance also depends on maintaining secure mounting, wiring connections, and aiming position.

Build Quality and Physical Characteristics

The housing is powder-coated aluminum with a bronze finish. The tempered glass lens protects the light source.

The fixture measures 9.8 inches long by 6.9 inches wide and weighs 5 pounds. Its EPA rating is 0.65.

Yoke mounting supports surface-mounted directional aiming. Knuckle mounting supports installations requiring a compact adjustable mounting connection.

Where This Product Fits Best

This flood light fits localized exterior lighting where adjustable output and directional aiming are needed. Its compact size and moderate lumen output suit focused areas rather than broad high-output coverage.

• security lighting
• building facade lighting
• area lighting
• parking lot lighting
• loading area lighting

IP65 construction supports exterior exposure, and the bronze housing blends with many exterior mounting surfaces. Final placement should account for mounting location, aiming direction, and the selected wattage.

Installation and Long-Term Use

Install the fixture using either the yoke or knuckle mount specified for the project. Confirm the mounting surface and support arrangement can accommodate the fixture weight and EPA rating.

Set wattage and color temperature before final aiming. Use the 100-277V supply range and verify electrical connections before energizing the fixture.

For long-term service, inspect the lens, housing, mounting hardware, and wiring connections during routine maintenance. Keep the lens clear of accumulated debris that can reduce light output.

How This Fixture Is Commonly Used

Mounting height is determined by the required light level, aiming angle, and selected wattage. The yoke or knuckle mount allows the fixture to direct light toward the intended lighting area.

Layouts typically use individual fixtures aimed at defined portions of the site rather than wide-area uniform coverage. Spacing varies with the 15W, 25W, or 35W setting and the required lighting pattern.

Higher output can reduce the number of fixture locations needed for a localized layout, but it can also increase glare when aiming is not controlled.

Safety, Certifications, and Warranty

This fixture is UL listed. It is rebate eligible.

The fixture is IP65 rated. Warranty coverage is 5 years.

Frequently Asked Questions

Q: What wattage settings are available?

A: The fixture has selectable 15W, 25W, and 35W settings.

Q: What lumen outputs are available?

A: The fixture produces 2025 lumens at 15W, 2700 lumens at 25W, and 4700 lumens at 35W.

Q: Can this flood light be dimmed?

A: No. This fixture is non-dimming.

Q: What should be considered when planning fixture placement?

A: Mounting height, selected wattage, aiming direction, target light levels, and layout requirements affect fixture placement. A specific spacing value is not established by the supplied product data.

Application Questions and Clarification

Q: Is this fixture appropriate for security lighting?

A: Security lighting is a valid application for this flood light. Output selection and directional aiming should match the lighting area and required light level.

Q: Which mounting options are available for building facade lighting?

A: The fixture is available with yoke or knuckle mounting. Both mounting options support directional fixture aiming.

Q: What color temperatures can be selected for area lighting?

A: The fixture has selectable 3000K, 4000K, and 5000K color temperatures.

Web ID: 2028